All Sailing Parts

2199 products

    Everything Nacra, Prindle, Hobie and a few more fun odds and ends.

    2199 products
    Hobie® factory replacement part for Hobie 20-style tiller connector and adjuster kit (#07-1953). Hobie part number 40550001. Murrays.com - In stock
    HOBIE THREADED TILLER CONNECTOR END CAP 1953
    Hobie
    H14/16/18/20/Wave Rudder Cam Stop Plate Murrays Part# 50-20352000 Hobie factory replacement rudder cam plate for Hobie 14, 16, 17, 18 (1987 and later) and Wave (with aluminum castings). Hobie Part# 20352000
    H-14/16/18/20/WAVE RUDDER CAM STOP PLATE
    Hobie
    Out of Stock
    H14/Wave Mast Base Murrays Part# 50-10640011 Hobie® factory replacement black mast base for Hobie® 14 or Wave. Use four 6-6 rivets (#19-5032) for installation.    
    H-14/WAVE MAST BASE
    Hobie
    Hobie Wave EZ Loc Rudder Assembly Murrays Part# 50-39312000 EZ Loc rudder assembly for the Hobie Wave. Hobie Part# 39312000
    WAVE EZ LOC RUDDER ASSEMBLY
    Hobie
    Out of Stock
    HOBIE POCKET PROTECTOR KIT
    Hobie
    H18 Traveler Roller Skid Murrays Part# 50-61810000 Hobie® factory replacement roller skid for Hobie® 18 main traveler.
    Hobie 18 main traveler car parts list - 6180001, 8040301, 61870000, 61880000, 60190000, 8050311, 61842000, 8060121, 61810000, 61830000, 61852000, 8020431
    H-18 TRAVELER ROLLER SKID
    Hobie
    H18 Thru-Deck Fairlead Murrays Part# 50-60270000 Fairlead Thru-Deck H18 for trapeze shock cord for skipper and crew trapeze lines that go through the lip on the outside of the hull. Center hole on this fairlead is 7/8" diameter and is sleeved with a stainless steel ferrule. Mounting screw holes have a center-to-center measurement of 1-3/8". Hobie® factory replacement part. Hobie Part# 60270000
    H-18 THRU-DECK FAIRLEAD
    Hobie
    Out of Stock
    Eyelet Post H20 Murrays Part# 50-41220001 The Eyelet Post H20 Hobie® factory replacement eyelet post for Hobie® 20 rear crossbar. This item replaces tie button for Inter cats #56-9882. Fits Hobie Getaway Rear Crossbar
    H-20 EYELET POST
    Hobie
    Hobie Wave Jib Spreader End Cap Murrays Part# 50-38950011 This is part of the Wave bow spreader kit. These go into the ends of the spreader pole. Replacement end cap for Hobie Wave jib spreader assembly. Sold individually Hobie Part# 38950011
    WAVE JIB SPREADER END CAP
    Hobie
    DIAMOND WIRE ROLLER
    Misc
    Nut Nylock 1/2-13" Stainless Steel Thin Murrays Part# 19-2531 Thin stainless steel 1/2-13 hex nut with nylock insert will not rust or work loose if properly installed. Used on 1/2" pylon bolt on most older Hobie 16's (changed to 3/8" in 1994). Equivalent to Hobie #8050631.
    NUT NYLOCK 1/2-13 (SS) THIN
    Misc
    H20 Jib Halyard Roller Furling Murrays Part# 002-0786-00 Jib halyard for Hobie® 20 with roller furling is constructed to factory specifications. Order 24' of #39-0221 1/8" Dacron line for jib halyard line. Compare to Hobie Cat® Part# 48661001
    H-20 JIB HALYARD ROLLER FURLING
    Murrays Sports
    3-Hole Pad Kit Murrays Part# 001-0110 This base kit is for Harken®, Hobie® or Murray 360 cleats without swivel base adapters. Kit includes one 3-hole base, one swivel base adapter (#25-3001), plus three #10 FHSMS (#19-1626). Ronstan swivel 360 cleats include swivel base adapters, so this kit is not necessary. Fits Hobie® or Prindle elliptical crossbar.
    3-HOLE PAD KIT
    Murrays Sports
    1/2 BALL (NYLON) - Hobie half round washer spacer tiller connector - Hobie part number 11510000 HOBIE HALF SPHERE TILLER CONNECTOR
    NYLON 1/2" BALL
    Murrays Sports
    Wing Mount Bar 2 x 1/2" Murrays Part# 19-0020 5/16-18" Hole
    WING MOUNT BAR 2.5 x 1/2"
    Murrays Sports
    Hobie Mast Step Pin 3/16 x 2 1/8" - 8020080 Replacement Hobie 14 and Hobie 16 mast step pin. Measures 3/16" x 2-1/8" Used with the Hobie mast step link kit 21380001 for raising and lowering the mast on a Hobie 14 and 16. Also called Hobie 16 mast hinge pin, mast step hinge pin, mast base pin, mast step link pin... Hobie part number 8020080
    HOBIE MAST STEP PIN 3/16 X 2 1/8 - 8020080
    Hobie
    Orion 500 2mm Mini Spool The Orion 500 2mm mini spool is a premium polyester all round line. The product features a 16-plait braided polyester cover combined with polyester yarn. Specifications: Core: polyester Cover: polyester 16 Diameter: 2mm Length: 15m Colors: red, yellow, black
    ORION 500 2MM MINI SPOOL
    Robline
    Out of Stock
    Nacra Illustrated Old Parts List Murrays Part# 56-0300 Performance Sports factory parts list for "older" Nacras, including Nacra 4.5/450, 5.0, 5.2, 5.5SL, 5.7, 5.8NA, 6.0NA, 5.5Uni, 18SQ.
    NACRA ILLUSTRATED OLD PARTS LIST
    Murrays Sports
    Out of Stock
    NACRA 15/F16/17/F20C BRIDLE CONNECTOR
    NACRA
    Nacra Rear Beam Tramp Tie Buttons Murrays Part# 56-30883 The NACRA Rear Beam Tramp Tie Buttons are the black nubs that are riveted on to the rear beam to hook the tramp lacing around. These are used on many boats and are installed with a 3/16 1/2" rivet. These can likely also be used on a Hobie Getaway, Miracle 20 or others that are looking to use a smaller Dyneema line instead of the 3/16 or 5/32 line Nacra Part# 30883
    NACRA REAR BEAM TRAMPOLINE TIE BUTTONS
    NACRA
    MULTI-PURPOSE MARINE GREASE 2oz
    Misc
    The Staymaster Turnbuckle - No more hit-and-miss wire tensioning! Shorten your diamond wires and use an adjustable tension mechanism to easily repeat tension settings
    STAYMASTER TURNBUCKLE 1/8
    Staymaster
    H18 Wing Strut Tab Murrays Part# 50-65100000 Hobie® factory replacement wing strut tab for Hobie 18.
    H-18 WING STRUT TAB
    Hobie
    Spreader Tip Cover Murrays Part# 56-9862 These vinyl spreader bar end covers are real sail-savers! The smooth, resilient cover protects the jib luff from wear and tear from cotter keys and sharp edges. Nacras (except original 5.2 with non-adjustable spreaders) and Prindles. Nacra Sailing factory replacement item# 30322
    NACRA SPREADER TIP COVER
    NACRA
    Tiller Tie Bar Fitting with Tendon Murrays Part# 56-4536 Tiller tie bar fitting with tendon fits all Inters
    NACRA TILLER TIE BAR FITTING WITH TENDON
    NACRA
    Out of Stock
    H16 Mast Head Sheave Pin  Hobie Part# 50-10630001 This is a hollow rivet for installing the Hobie 16 masthead sheave on an all aluminum mast, large pulley masthead. Requires special tools or creative minded sailor to improvise their own installation method
    H-16 MAST HEAD SHEAVE PIN
    Hobie
    Jib Track End Stop Murrays Part# 56-1911 1 Jib track end stop. Fits Nacra 5.5SL, 5.7, 5.8, 6.0, as well as Prindle 18-2 and 19.
    PRINDLE/NACRA JIB TRACK END STOP
    NACRA
    CHEATA ALUMINUM BLOCK
    Murrays Sports
    HOBIE 16 JIB TRAVELER CAR SHEAVE Replacement Hobie 16 Jib traveler car sheave. Hobie part number 20132030
    H16 JIB TRAVELER CAR SHEAVE
    Hobie
    The Selma fid (needle) is the only tool for splicing all kinds of rope. Selma fids are made of highly polished stainless steel. Made in Norway and patented worldwide. Please note that the appropriate fid size will depend on the type and construction of line. The purchase of a set of 4 or 5 fids may be a better option if you are unsure of the fid size you need.
    SELMA FID 7.5mm 5/16-3/8"
    Selma
    CATAMARAN BOAT YARD COVER
    Misc
    Quick-Release Pin Deluxe 3/16 X 3/4 with Lanyard Murrays PN 18-3M075L The Quick-Release Pin Deluxe 3/16 X 3/4 with Lanyard features a deluxe dished head and a lanyard to help prevent loss. No other locking pin is faster operating or safer. The pin with cup head includes a stainless lanyard that comes secured on one end with a nicropress oval; the other end is left open so that you can secure with included nicropress oval after attaching the lanyard to your chosen location. This Quick Release Pin featur
    QUICK RELEASE PIN 3/16 X 3/4" WITH LANYARD
    Misc
    CINCH RING 5/16 8mm
    Misc
    Rivet Washer Nylon Commonly used on NACRA catamarans to insulate the stainless rivet from aluminum extrusions. Nacra PN 40200
    RIVET WASHER NYLON
    Murrays Sports
    MURRAYS SUNSET TEE, Murrays Marine, Murrays.com
    MURRAYS SUNSET T-SHIRT FRONT
    MURRAYS SUNSET TEE
    Murrays Sports
    Nylon Port Fastener Kit The Port Nylon Fastener Kit includes all the necessary nylon fasteners (screws, washers and nuts) plus marine silicone sealant for the installation of two access ports, also known as hatches, on to a catamaran like a Hobie, Nacra or Prindle. Use this page to order: 001-1159 White 001-1160 Black
    NYLON PORT FASTENER KIT
    Murrays Sports
    H17 Trapeze Wires (2) The H17 Trapeze Wires (2) basic trapeze assembly includes two coated trapeze wires 3/32" (1x19) with nylon handles and a thimble at each end. Wires end just below handles. Order with a trapeze adjustment kit (#01-1121 or 01-1140, purchased separately) and it will be added to wire with no installation charge. Compare to Hobie part number 1471B. ​Order shock cord, Can't miss rings/dog bones and adjustment kits separately. Murrays PN 002-0353-01 002-0353-02
    H-17 TRAPEZE WIRES (2)
    Murrays Sports
    H17 Bridle 1/8" The H17 Bridle 1/8" is one bridle for Hobie® 17 constructed of 1/8" wire to factory specifications. Choose from White or Black wire coating. Compare to Hobie Cat Part Number 50701101.
    H-17 BRIDLE 1/8" WIRE
    Murrays Sports
    H17 Forestay 1/8" The H17 Forestay 1/8" for Hobie® 17 is constructed to factory specifications. Choose from White or Black wire coating. Compare to Hobie Cat® #50701201.
    H-17 FORESTAY 1/8" WIRE
    Murrays Sports
    The Surefoot EVA Deck Grip Kit is back, now with 3m peel and stick backing on diamond-textured EVA foam. Ideal rail and or deck grip on all dinghies and catamarans. EVA traction pads offer grip, padding and a long life span. EVA is a lightweight foam doesn’t absorb water the way carpet does, so there is minimal weight when it gets wet! Universal Catamaran Kit: Six 3" x 40" peel and stick foam grip strips - will work on virtually any Prindle, Nacra, or any other boat class for railing traction.
    UNIVERSAL SUREFOOT EVA KIT
    Murrays Sports
    Recently viewed