All Sailing Parts

2197 products

    Everything Nacra, Prindle, Hobie and a few more fun odds and ends.

    2197 products
    CAT TRAX WIDE HULL CRADLES
    Cat Trax
    Rear Mast Support with "V" Murrays Part# 13-3002
    REAR MAST SUPPORT WITH "V"
    Murrays Sports
    Out of Stock
    Specs: 1/4" diameter x 1" maximum grip length (distance from the shoulder to the locking ball bearings). Uses: Hobie boom Gooseneck quick connection pin on the 14, 16 and 18. Hobie 18 main clew to outhaul car connection pin. Compare to Hobie Cat® Part# 20305 PIN, QR 1/4 X 1 CUP Upgrade for Hobie Part# 8020410 and 8020411 clevis pin
    QUICK RELEASE DELUXE PIN 1/4 X 1"
    Misc
    Inter 20 Shroud 5/32" Black Wire Roller Swaged Murrays Part# 002-5405-12 Single black shroud for Inter 20 is hydraulically swaged to be clean and strong. Constructed to factory specifications.
    INTER 20 SHROUD 5/32"BLACK WIRE ROLLER SWAGED
    Murrays Sports
    Prindle diamond wire
    PRINDLE 18/18.2 DIAMOND WIRE WITH TURNBUCKLE
    Murrays Sports
    Big Cat Catamaran Righting System Murrays Part# 001-8293 The Big Cat Righting System features the extra line needed to bring bigger cats up from turtle position while keeping the deck clear for better footing. The extra length of 1/2" hollow braided line is quickly accessed by unhooking either or both ends of line with carbine hooks. Extra line is neatly suspended just aft of front crossbar and is held in place with shock cord. Blue water tested and proven! The Big Cat Righting System fits Hobie® 20/21, P
    BIG CAT RIGHTING SYSTEM
    Murrays Sports
    Catamaran Universal Righting System Murrays Part# 001-8292 The Universal Righting System is simple and effective with large, 1/2" diameter, black polypropylene righting line that is light and easy to access and grip, even when wet. The line self-returns under the tramp after use. There are no knots to pre-tie or untie. The shock cord and pulleys provided hold line snug and are external, so they are easy to adjust and service. Fits 8' to 8'6" wide catamarans; ideal for boats with flush-deck trampoline.
    UNIVERSAL RIGHTING SYSTEM
    Murrays Sports
    Spare Parts Kit: Nacra Murrays Part# 001-8221 Why lose a weekend of sailing due to a missing part? Stored in a 5" x 12" zippered pouch, this kit contains the most frequently lost and needed items for your Nacra catamaran. Includes shackle tool, two drain plugs with gaskets, aluminum rudder pins, clevis pins and rings kit, 3/16" bow shackle, 1/4" bow shackle and batten tie strings. Pouch comes in assorted colors. Newer Nacras use pintles instead of rudder pins, so the included rudder pins are not
    NACRA SPARE PARTS KIT
    Murrays Sports
    Dolphin Striker Eye Bolt H14 Murrays PN 001-0106 This part is used as part of the Murrays H14 Dolphin Striker Kit. Replacement stainless steel post for #01-2083 dolphin striker for Hobie® 14. 19-2524 nylock nut is needed and not included with this part.
    H-14 DOLPHIN STRIKER EYE BOLT
    Murrays Sports
    Hobie Pre EZ Loc Upper Pintle Murrays Part# 50-38101301 Replacement upper pintle assembly for Hobie Wave and Hobie Getaway sailboats using the pre EZ loc style rudder assembly. Original Equipment on Hobie Wave and Hobie Getaway sailboats Upper pintle should be mounted with two (2) screws Use Part# 8030171 for boats 2008 and older, or Part# 8030331 for 2009 and newer If you have an EZ Loc style assembly, use the Hobie EZ loc upper pintle part# 90880211 Hobie Cat Part # 38101301
    HOBIE PRE EZ LOC UPPER PINTLE
    Hobie
    Hobie Getaway Forestay Yoke Murrays Part# 50-37810030 This is part of the forestay assembly that hooks up to the main shackle on the mast. Hobie Part# 37810030
    GETAWAY FORESTAY YOKE
    Hobie
    HOBIE SAIL AND BOOM BAG STANDARD
    Hobie
    Hobie EZ Loc Rudder Linkage Murrays Part# 50-50313201 Replacement rudder linkage for Hobie EZ Loc style rudder assemblies.  Hobie Bravo, Getaway and Wave Hobie Part# 50313201
    HOBIE EZ LOC RUDDER LINKAGE
    Hobie
    Out of Stock
    Hobie EZ Loc Rudder Housing 50-50313001 EZ Loc Rudder Housing for Hobie Bravo EZ Loc Rudder Housing for Hobie Getaway EZ Loc Rudder Housing for Hobie Wave Hobie part number 50313001 Fits Hobie Wave and Hobie Bravo and Hobie Getaway
    HOBIE EZ LOC RUDDER HOUSING
    Hobie
    Out of Stock
    H-14/16 FOAM PLUG FOR PYLON
    Hobie
    WAVE MAST BASE new S/N 1438 UP
    Hobie
    Tiller Crossbar Adjustable Cap Kit Murrays Part# 50-60400011M Murrays Tiller Crossbar Adjustable Cap Kit installs in the end of the Hobie tiller crossbar and allows you to adjust the width of the crossbar which controls the angel of the rudders. Hobie discontinued this part and this is a Murrays Replacement part that we have made here in California. Applications: H14, H16, H17, H18, Hobie 18 SX tiller x-bar Tiller Crossbar Adjuster: 1
    HOBIE TILLER CROSSBAR ADJUSTABLE END CAP
    Murrays Sports
    Hobie factory tiller connector insert bearing for Hobie 20 Miracle. Hobie part number 40680001. Murrays.com - in stock
    HOBIE TILLER CONNECTOR INSERT BEARING
    Hobie
    Hobie® factory replacement end cap for Hobie 20-style tiller connector and adjuster kit (#07-1953). Hobie part number 40561001 and 40561000
    H-20-1995 & LATER TILLER CONNECTOR END CAP
    Hobie
    Murrays Part# 50-10432000 Hobie® factory 2½" spring for Hobie® 16 lower rudder casting. This spring is longer and stiffer than original equipment (#50-10430000), providing additional tension if you are having trouble with rudder kick up. Used on Hobie 18 Rudder Systems from late 80s through now. Used on Hobie 16 Rudder Systems after 1983 Used on Hobie Getaway Rudder Systems pre- EZ Loc Hobie part number 10432000
    HOBIE RUDDER SPRING-LONG
    Hobie
    Roller Furler Spool Housing Murrays Part# 50-61960001 Hobie® factory replacement spool and housing for roller furler.
    ROLLER FURLER SPOOL & HOUSING
    Hobie
    Roller Furler Drum Ball Bearing Murrays Part# 50-61670000 Hobie® factory replacement bearing for Hobie roller furler. A total of 18 ball bearings are required per furler.
    HOBIE ROLLER FURLER BEARING
    Hobie
    Gooseneck Boom Pin Murrays Part# 50-50502201 Hobie Cat gooseneck boom pin for securing boom assembly to mast at the gooseneck joint. Hobie Part# 50502201
    HOBIE GOOSENECK BOOM PIN
    Hobie
    Rivet AAC 3/16 x 5/8 CSK Murrays Part# 50-8010171 Hobie® factory aluminum 3/16" x 5/8" countersunk rivet requires a rivet tool for installation.
    RIVET AAC 6-10 3/16x5/8 CSK
    Hobie
    H14 Mast Spinnaker Tang Murrays Part# 50-10690000 Hobie® factory replacement spinnaker tang or mast tang for Hobie 14 or Wave. Use six 6-4 rivets (#19-5031) and six 6-4 casings (#19-5020) for installation.
    HOBIE 14/WAVE MAST TANG
    Hobie
    Out of Stock
    H18 Mast Base Casting-Black Murrays Part# 50-60641031 Hobie® factory replacement black mast base casting for Hobie® 18. Use four #19-5032 rivets for installation.
    H-18 MAST BASE CASTING-BLACK
    Hobie
    HOBIE EPO3 RUDDER BLADE
    Hobie
    H16 Mesh Trampoline- Turquoise Murrays Part# 50-20970058 Mesh trampoline for the Hobie 16 with a double grommeted center section. Reinforced in high load areas, has super duty grommets and comes complete with line pockets and built in hiking straps. Note that this trampoline requires a longer lacing line than older models. Includes aft lacing strip. Lacing line is sold separately. Heat-welding lasts longer in the sun than trampolines that are stitched at the seams. Mesh allows wind and water t
    H-16 MESH TRAMPOLINE-TURQUOISE
    Hobie
    H18 Dolphin Striker Post Murrays Part# 50-60140001 Replacement dolphin striker post for the Hobie 18 sailboat. Hobie Part# 60140001
    H-18 DOLPHIN STRIKER POST
    Hobie
    Out of Stock
    Comp-Tip Mast Head H16 Murrays Part# 50-20614001 Hobie® factory replacement mast head with sheaves. Use four #19-5032 6-6 rivets for installation. This is the standard Hobie Part that comes with all comptip masts on Hobie 16s. This CompTip mast head also replaces the obsolete Hobie 16 mast head (no longer available) for all-aluminum mast. The original halyard will work if you move the halyard hook down to the appropriate height. Alternatively, a new comptip halyard #02-0273-60
    H-16 COMP-TIP MAST HEAD
    Hobie
    Out of Stock
    H16 Comp Tip Luff Track Murrays Part# 50-20616001 Hobie® factory replacement 93" luff track for Hobie® 16 with CompTip on mast.
    H-16 COMP-TIP LUFF TRACK
    Hobie
    HOBIE 18 CHANNEL RETAINING PLATE HOBIE PART NUMBER 61110000
    H-18 CHANNEL RETAINING PLATE
    Murrays Sports
    Yoke Stamping Only Stainless Steel Murrays Part# 001-0063 Replacement yoke stamping for #01-0062 hiking stick yoke assembly. Compare to Hobie Cat® #3205.
    YOKE STAMPING ONLY (SS)
    Murrays Sports
    Screw PHMS #10-32 X 1 Stainless Steel Slot Head Murrays Part# 19-2915 Stainless steel, pan head #10-32 x 1" machine screw with slot is used as dolphin striker screw on all Prindles. Replaces Murrays item #56-F112. Also used in some Hobie Applications, compare to 8030111 Hobie Part. Applications: H18/18 SX/16 and Getaway Tiller Hinge Screw: 2
    SCREW PHMS #10-32 X 1" (SS)
    Misc
    Out of Stock
    Mast Float Mama Getaway Murrays Part# 007-30119
    MAST FLOAT MAMA GETAWAY
    Hobie
    H20 Upper Forestay 5/32" Black Wire with Roller Furling Murrays Part# 002-0735-02 Black upper forestay for Hobie® 20 with roller furling setup. Constructed to factory specifications. Compare to Hobie Cat® Part# 40810011
    H-20 UPPER FORESTAY 5/32" BLACK WIRE WITH ROLLER FURLING
    Murrays Sports
    H20 Jib Halyard with Shackle Murrays Part# 002-0783-50 Jib halyard with shackle for Hobie® 20 is constructed to factory specifications. Compare to Hobie Cat® Part# 41661001
    H-20 JIB HALYARD WITH SHACKLE
    Murrays Sports
    H20 Forestay 5/32" Black Wire with 5/16 Stud Murrays Part# 002-0745-82 Lower forestay with 5/16" stud for Hobie® 20 is constructed to factory specifications.  Compare to Hobie Cat® Part# 40822121
    H-20 FORESTAY 5/32" BLACK WIRE WITH 5/16" STUD
    Murrays Sports
    H20 Bridle 5/32" Black Wire Murrays Part# 002-0715-22 One bridle for Hobie® 20 is constructed to factory specifications.  Compare to Hobie Cat® Part# 40822001
    H-20 BRIDLE 5/32" BLACK WIRE
    Murrays Sports
    Clamcleat Leech Line Cleat Murrays Part# 27-0212 Jib halyard tensioning cleat for zippered luff jibs. The low-profile, white nylon Clamcleat® can be sewn or riveted onto sails and technical fabrics. It can be mounted in two positions on the sail. The tooth design allows a quick, positive lock that is easy to release. It is an ideal cleat for adjusting leech lines. Use a backplate when riveting a cleat onto fabric, as it will prevent the rivet pulling through. Includes: backing plate and 2x flare rivet
    CLAMCLEAT LEECH LINE CLEAT
    Clamcleat
    Recently viewed