Sailing Boom Parts

73 products

    73 products
    Out of Stock
    3/16 - 1/4" Split Ring
Murrays Part# 22-9492
Stainless steel split ring (ring ding) for 3/16″-1/4″ diameter clevis pin. This is the standard size Hobie split ring used all over the boats, most commonly on the shrouds, forestay and roller furler
Medium Split ring
Dimensions: 5/8″ Diameter
Material: 316 Stainless steel.
This is the most common size Split ring on Hobie, Nacra and Prindle Catamarans. 20860000 Medium Clevis Ring.
    SPLIT RING 3/16-1/4"
    Misc
    $0.75
    Hobie 16 gooseneck bearing kit. Tren Tec.  Murrays Marine. Hobie Cat part number #1511
    Murrays Gooseneck Bearing Kit Hobie 14 & 16 instructions
    GOOSENECK BEARING KIT H-14/16
    Tren-Tec
    $11.99
    Stainless steel clevis pin. Measurement is 1/4" diameter x 5/8" grip length. Hobie part number 8020361, 8020381 and 8020380.
    CLEVIS PIN 1/4 X 5/8
    Misc
    $2.00
    Sealed Stainless Steel 3/16" x 3/8"
Pan Head Rivet
Murrays Part# 19-5032S
Sealed rivets have a sealed end that does not require rivet casings to make them water tight. One and done, no casing needed, just insert and pop as you would a normal rivet, and your hole will be sealed.
Among other uses, the Stainless steel 3/16" x 3/8" pan head rivet can be used when Hobie® rivet #8010131 is specified:
Hobie 14 (2) or 16 (4) mast head
Hobie Wave/Getaway/14/16/17/18/18SX/ mast base (4)
Hobie 14/16
    RIVET CCP SEALED 6-6 (3/16 X 3/8)
    Misc
    $1.30
    SUPER GOOSE H-17/18/20/21
This upgraded gooseneck by Tren Tec is constructed from a solid block of 6061-T6 aluminum and then finished with a coat of black hardkote anodizing.

The Super Goose is for Hobie® 17 (newer), 18, 20 and 21; not compatible with older Hobie® 17 model.

Hobie part number 1510
    SUPER GOOSE H-17/18/20/21
    Tren-Tec
    $23.10
    CLEVIS PIN 3/16 X 7/8
    Misc
    $3.50
    Harken 22mm Block

Murrays Part# 28-0224

This Harken ball bearing micro single block with stainless side plates is a small block with high load capabilities. It is a premium quality block for your trapeze return system.
    HARKEN 22MM BLOCK
    Harken
    $15.70
    Hobie Cat 8010181 Rivet
    RIVET CCP SEALED 6-4 (3/16 X 1/4)
    Misc
    $1.25
    H18 Mast Head/Base Sheave

Murrays Part# 50-60620000

Factory replacement sheave for Hobie 18 mast head/base and outhaul assembly.

Specs: 1" Diameter x 3/8" wide and 1/4" hole.

Also used as traveler control line turning sheave on 2005 and newer Hobie 16 sailboats.

Applications:

Hobie 18 - Mast head halyard sheave ; mast base halyard sheave ; outhaul car sheaves.
Hobie 16 - Jib Traveler line sheave. (in the H16 Race Corner Castings) use 50-8011251 Rivet
    H-18 MAST HEAD/BASE SHEAVE
    Hobie
    $9.99
    HOBIE 14/16 GOOSENECK ASSEMBLY

Murrays PN 50-10770001

Hobie factory replacement gooseneck assembly for Hobie 14 or 16. Hobie Cat item #10770001.
    H14/16 GOOSENECK ASSEMBLY
    Hobie
    $91.99
    Rivet CCP 6-8 (3/16 X 1/2)
Murrays Part# 19-5033
Stainless steel 3/16" x 1/2" rounded pan head rivet. Compare to Hobie Cat® #8011231.
    RIVET CCP 6-8 (3/16 X 1/2)
    Misc
    $0.85
    H14/16/18 Gooseneck Boom Pin

Murrays Part# 50-10772010



Hobie® factory gooseneck boom pin for Hobie® 14, 16 or 18.
    H14/16/18 GOOSENECK BOOM PIN
    Hobie
    $28.99
    Hobie 18/21Sport Edition Boom Cleat Clamp

Murrays Part# 50-61711000M 

The Hobie boom clamp mounts the clamcleat (#27-0702) on to a Hobie 18 boom. Two boom clamps are required to mount one cleat.

This is a Murrays product, made with an Anodized aluminum body and a 316 stainless steal screw insert.  Made in California, USA.

Compare to Hobie part# 61711000 discontinued by Hobie
    H-18/21SE BOOM CLEAT CLAMP
    Murrays Sports
    $18.99
    Upper Rudder Roller

Murrays Part# 56-4009


This plastic spacer/ roller is used in the locking mechanism of Prindle Rudder systems. It is also used as a boom roller.
    UPPER RUDDER ROLLER
    NACRA
    $2.30
    NUT SQUARE 10-32

Murrays Part# 50-8051301


Hobie® factory replacement stainless steel 10-32 square nut can be used when mounting downhaul/halyard cleat on Hobie® 14 or 16.

Also can be used for mounting H17 trampoline eye straps. Use 19-2910 screw.

Hobie Part# 8051301
    NUT SQUARE 10-32
    Hobie
    $0.29
    Sealed Rivet CCP 6-8 (3/16 X 1/2)
Murrays Part# 19-5033S
Sealed rivets have a sealed end that does not require rivet casings to make them water tight. One and done, no casing needed, just insert and pop as you would a normal rivet, and your hole will be sealed.
Sealed Stainless steel 3/16" x 1/2" rounded pan head rivet. Compare to Hobie Cat® #8011231 Rivet and Hobie Cat® #8011291 rivet casing.
    RIVET CCP SEALED 6-8 (3/16 X 1/2)
    Misc
    $1.40
    Boom Outhaul Bearing H18
Murrays Part# 50-60240000
Boom bearing for Hobie 18 outhaul system
    H-18 BOOM OUTHAUL BEARING
    Murrays Sports
    $5.39
    Hobie Gooseneck Hinge Vertex

Murrays Part# 50-50772031
Hobie® factory replacement gooseneck vertex for all Hobie® Cats.


Hobie Part# 50772031
    HOBIE GOOSENECK HINGE VERTEX
    Hobie
    $17.99
    H14/16 Gooseneck Shackle

Murrays Part# 50-10772020



Hobie factory replacement gooseneck shackle for Hobie 14 and Hobie 16.

Uses a 3/16 x 7/8" clevis pin to connect to the main sail tack.

Quick release upgrade option is the 3/16 x 3/4" Quick Release Pin, part #18-3M075L

Some newer boats and racers replace the downhaul ring with a second Gooseneck Shackle.
    H14/16 GOOSENECK SHACKLE
    Hobie
    $9.99
    Out of Stock
    Nacra Boom Pin
    NACRA
    $25.00
    V JAM CLEAT BOOM (3/16" HOLES)
    Hobie
    $25.00
    H20 Boom Outhaul Car

Murrays Part# 50-40230001



This is the outhaul car plate for the Hobie Miracle 20. It does not include the rollers or bearings. Hobie discontinued the traveler car and we are producing one to the same specifications.

Hobie part# 40230001
    H-20 BOOM OUTHAUL CAR
    Hobie
    $25.00
    H18/20 Outhaul Car Bearing Pin

Murrays Part# 50-60250000



This pin is used to hole the bearings on the traveler car for an H-18 or Miracle 20 beachcat. This pin has been discontinued by Hobie, this part meets or exceeds OEM quality and specification.

Compare to Hobie Part# 6025000
    H-18/20 OUTHAUL CAR BEARING PIN
    Hobie
    $5.39
    Hobie Boom Blocker Hanger 

Murrays Part# 50-10760000

Hobie factory boom block hanger for the Hobie 14, 16, 17 and 18.

Hole spacing is 1-1/8". 

Use four 6-4 rivets (#19-5031) for installation.
    HOBIE BOOM BLOCK HANGER
    Hobie
    $11.99
    Deluxe Quick Release Pin 1/4 X 1 with Lanyard

Murrays Part# 18-4M100



This quick release pin features a push button on the top that releases 2 spring-loaded balls at the tip that secure the pin in place. Uses:

Hobie boom Gooseneck quick connection pin on the 14, 16 and 18.
Hobie 18 main clew to outhaul car connection pin.



Compare to Hobie Cat #20305 PIN, QR 1/4 X 1 CUP

Upgrade for Hobie 8020410 and 8020411 clevis pin
    DELUXE QUICK RELEASE PIN 1/4 X 1 WITH LANYARD
    Misc
    $47.00
    Specs: 1/4" diameter x 1" maximum grip length (distance from the shoulder to the locking ball bearings).

Uses:

Hobie boom Gooseneck quick connection pin on the 14, 16 and 18.
Hobie 18 main clew to outhaul car connection pin.



Compare to Hobie Cat® Part# 20305 PIN, QR 1/4 X 1 CUP

Upgrade for Hobie Part# 8020410 and 8020411 clevis pin
    QUICK RELEASE DELUXE PIN 1/4 X 1
    Misc
    $45.00
    Used for tiller connection on Hobie Cats®. The stainless 1/4-20 stainless steel hex nut with nylock insert will not rust or work loose if properly installed. Equivalent to Hobie #8050111. Also Equivalent to Nacra/Prindle F123 gudgon nut for all Prindle and older Nacras.
Applications:
Hobie 18 / H18:
Bow Tang Nut Qty: 6
Rudder Adjustment: 1
Hobie Getaway: Forestay Yoke Nut
    NYLOCK NUT 1/4-20 SS
    Misc
    $0.45
    CLAMCLEAT (ALUM)
    Clamcleat
    $14.75
    Quick Release Pin Deluxe 3/16 X 1"

Murrays Part# 18-3M100



This convenient pin features a deluxe dished head with a hole for lanyard attachment. No other locking pin is faster operating or safer.

The pin is also available with a 1/16" x 7" stainless lanyard with nicropress ovals (see related items). Measurements for this quick pin with cup head are 3/16" diameter x 1" maximum grip length (distance from the shoulder to the locking ball bearings).
    QUICK RELEASE PIN DELUXE 3/16 X 1"
    Misc
    $24.00
    Front Boom End Cap

Murrays Part# 56-7902




Front boom end cap for Nacra and Prindle cats.

Nacra Sailing factory item# 30204
    FRONT BOOM END CAP
    NACRA
    $26.00
    Rear Boom End Cap

Murrays Part# 56-7903




Rectangular rear boom end cap casting for Nacra 5.2 and all Prindles.

Nacra Sailing factory item# 30205
    REAR BOOM END CAP
    NACRA
    $25.25
    H14/16 GOOSENECK SLIDE
    Hobie
    $24.99
    Gooseneck Boom Pin

Murrays Part# 50-50502201

Hobie Cat gooseneck boom pin for securing boom assembly to mast at the gooseneck joint.

Hobie Part# 50502201
    HOBIE GOOSENECK BOOM PIN
    Hobie
    $1.39
    Clevis Pin 1/4 x .83"

Murrays Part# 50-8020391

Hobie® factory clevis pin measures 1/4" diameter x .8285" grip length (shoulder to the split ring hole).
    CLEVIS PIN 1/4 X .83"
    Hobie
    $2.39
    H20 Boom Retainer Clip

Murrays Part# 50-8060151

Hobie® factory replacement boom retainer clip for Hobie 20.

Hobie Part# 8060151
    H20 BOOM RETAINER CLIP
    Hobie
    $0.79
    Out of Stock
    BOOM ASSY H20 OS
    Hobie
    $470.00
    Out of Stock
    Boom Assembly H17 Black
Murrays Part# 50-50510000
Hobie® factory replacement black boom assembly for Hobie® 17. 
Hobie part# 50510000
    BOOM ASSEMBLY H-17 BLACK
    Hobie
    $505.00
    Harken 4:1 Mainsheet System
    Murrays Hobie wave main sheet system
    HARKEN 4:1 MAIN SHEET SYSTEM
    Harken
    $295.00
    Ronstan Series 40 Ball Bearing Block, Double with Becket

Murrays Part# 21-40210

This block is used as a replacement for the upper mainsheet block on a Hobie Getaway. Double sheave block with becket and swivel shackle head (non-locking)
    RONSTAN SERIES 40 BALL BEARING BLOCK, DOUBLE WITH BECKET
    Ronstan
    $85.00
    Boom Alu Nacra F20C
    NACRA
    $295.00