Ronstan

Ronstan

122 products
    122 products
    Ronstan Stainless Steel Bow Shackle, 5/16" Pin, Coined Head with Hole Murrays Part# 21-0636 The Ronstan 5/16 Bow Shackle has 5/16" diameter pin. Compare to Hobie® #20700001 and SP150081. Standard all Hobie, Nacra and Prindle catamarans to attach the standing rigging to the mast tang.
    RONSTAN 5/16" BOW SHACKLE
    Ronstan
    1/4 bow shackle Ronstan Part# RF635 Compare to Hobie® #10700000, 10700010 and SP150061, 27900146,
    1/4" Bow Shackle Ronstan PN RF635
    RONSTAN 1/4" BOW SHACKLE
    Ronstan
    Ronstan Stainless Steel Bow Shackle, 3/16" Pin, Coined Head Murrays Part# 21-0634 Solid stainless steel bow shackle has 3/16" diameter pin.  UDL BL - The “Uniformly Distributed Load” breaking load of the shackle; the load is applied across the full span of the shackle pin. PL BL - The “Point Load” breaking load of the shackle; the load is only applied at the center or one side of the shackle pin.
    RONSTAN STAINLESS STEEL BOW SHACKLE, 3/16" PIN, COINED HEAD
    Ronstan
    Replacement sheave for mast head on Nacra 5.0, 5.2, 5.5, 5.7, 5.8, 6.0, 18 Square, Prindle 16 and Sol Cat 18 (cats that use a wire halyard). UV-resistant acetal material provides high strength and resistance to impact and wear, as well as excellent low friction properties for bearing applications.
    RONSTAN SHEAVE: P16 AND NACRA MAST HEAD
    Ronstan
    Ronstan Stainless Steel D Shackle, 3/16" Pin, Slotted Head Murrays Part# 21-0616 Ronstan stainless D shackle has 3/16" diameter pin. This shackle is a substitute for Hobie® item #11220000, #SP0051 and #SP0052.
    RONSTAN STAINLESS STEEL D SHACKLE, 3/16" PIN, SLOTTED HEAD
    Ronstan
    Ronstan Bullseye with Ferrule Murrays Part# 25-0323 Stainless ferrule eliminates with nylon housing, the stainless center coating prevents grooving and wear from uses. Allows for up to 7/16" line capacity. Mounting: Two screws ordered separately (#10-32x1") part number 19-2915.
    RONSTAN BULLSEYE FAIRLEAD WITH FERRULE
    Ronstan
    Ronstan Series 19 C-Track End Cap Murrays Part# 21-0366 These are End Stops for the new C-Track by Ronstan. Similar to the stainless tracks used on H18 and H16 in the past. Track end, plastic Best replacement for End stop for 5/8" jib track as on Hobie® 16 or Hobie® 18. The end stop can be fastened with #19-1620 screw or #19-5021 6-4 countersunk rivet. Compare to Hobie Cat part #20260000.
    RONSTAN JIB TRACK END CAP
    Ronstan
    Ronstan Halyard Shackle, 1/4" Pin Murrays Part# 21-1033 The Ronstan Halyard Shackle with Twist Pin's main advantage is that you cant loose any of it once its attached. The top pin holds it on and the bottom pin dose not come out. Never loose your shackle pins again! The 1/4" Halyard Shackle with Twist Pin is used in the following Murrays Products: 02-4383-50 N-5.5SL Jib Halyard w/Shackle
    RONSTAN STAINLESS STEEL TWISTED D SHACKLE, 3/16" PIN, COINED HEAD
    Ronstan
    Shackle Pin Only 3/16 Threaded Murrays Part# 21-0032 Threaded stainless pin fits 3/16" Ronstan D or bow shackle.
    SHACKLE PIN ONLY 3/16" THREADED
    Ronstan
    Ronstan Single Block, Ferrule Murrays Part# 21-0469 This is the original clew block on most of the old Hobie cat Sailboats. This will work as a replacement jib clew block for Hobie® 14, 16 and 18 cats. Lightweight stainless block with ferrule has 1-1/8" x 5/8" sheave diameter, Delrin bearing and 1/2" line capacity. SWL: 950 lbs. This is a great option if you're looking to use a larger line diameter on your sheets or want the classic look.
    RONSTAN SINGLE BLOCK WITH FERRULE
    Ronstan
    Replacement Sheave Prindle Rudder Upper Ronstan PN RF1741 Replacement sheave for upper part of rudder casting on all models of Prindle catamarans. Replacement for Performance Sports item #4009. 1/4" wide x 3/4" diameter, 1/4" hole.
    ILLUSTRATED PRNDLE RUDDER PARTS LIST
    RONSTAN 19MM ACETAL SHEAVE, 6MM WIDTH
    Ronstan
    Ronstan Plastic Drain Plug with Chrome Brass Housing, 15/16" Hole Murrays Part# 21-0737 This lightweight and inexpensive plug features a molded recess in the base that traps sealant (sold separately) in place, providing a more watertight seal. Nylon plug is UV-stabilized. Retaining legs keep drain plug from falling out of hole when unscrewed. Includes chromed brass housing (body) and gasket.
    RONSTAN PLASTIC DRAIN PLUG WITH CHROME BRASS HOUSING, 15/16" HOLE
    Ronstan
    P18/19 Ronstan Mast Head Base Sheave Murrays Part# 56-6804 Replacement sheave for mast base on Prindle 15, 18, 18.2, 19 and Nacra 2003 and later mast head. Sheave measures 1-1/8" diameter x 3/8" wide. Please note that this item replaces #6803 that is no longer available.
    P-18/19 RONSTAN MAST HEAD SHEAVE
    Ronstan
    Ronstan Stainless Steel Long D Shackle, 1/4" Pin, Coined Head Murrays Part# 21-0623 This stainless steel long D-shackle has a 1/4" diameter pin. Great for adding replacing the clevis pin on your H18 bridles for a spinnaker project.
    RONSTAN STAINLESS STEEL LONG D SHACKLE, 1/4" PIN, COINED HEAD
    Ronstan
    Spring Clip: 1/4-5/16 Murrays Part# 25-2204 Use this stainless spring clip for quick rudder pin removal or on 1/4" to 5/16" pins. This handy little pin is also called a hairpin cotter, bridge pin, hitch pin clip or R clip. Great convenience item for all boats with rudder pins, ie: Hobie 14, 16, 17, 18, 20, Prindle 15, 16, 18, 18-2, 19, 19MX, and Escape.
    SPRING CLIP: 1/4 - 5/16"
    Ronstan
    Ronstan Halyard Shackle, 1/4" Pin Murrays Part# 21-1033 The Ronstan Halyard Shackle with Twist Pin's main advantage is that you cant loose any of it once its attached. The top pin holds it on and the bottom pin dose not come out. Never loose your shackle pins again! The 1/4" Halyard Shackle with Twist Pin is used in the following Murrays Products: 02-4383-50 N-5.5SL Jib Halyard w/Shackle
    RONSTAN HALYARD SHACKLE, 1/4" PIN
    Ronstan
    Ronstan 24mm Sister Clip Murrays Part# 21-0536 Stainless steel mini sister clip is a quick connector with no moving parts. Sister clip, 7mm (9/32") eye clearance. Effective means of quickly attaching and detaching ropes
    RONSTAN 24MM SISTER CLIP (EACH)
    Ronstan
    Ronstan Clevis Pin Retaining Clip Murrays Part# 21-0413 The Ronstan Spring Clip is a stainless spring clip for quick rudder pin removal or Hobie 14, 16, 17, 18, 20, Wave and Getaway models. This handy little pin is also called a hairpin cotter, bridge pin, hitch pin clip or R clip. Great convenience item for all boats with rudder pins, ie: Hobie, Nacra and Prindle 15, 16, 18, 18-2, 19, 19MX, and Escape. Ronstan Part# RF413
    RONSTAN CLEVIS PIN RETAINING CLIP
    Ronstan
    Ronstan Eye & Eye Swivel Murrays Part# 21-0078 This ball bearing swivel by Ronstan has lower friction and higher working loads than non-ball bearing versions. It is used in conjunction with blocks and rigging systems to provide articulation and rotation. Not suitable for high-speed rotating applications.
    RONSTAN ROLLER FURLING SWIVEL (EYE/EYE)
    Ronstan
    Add color and comfort with Ronstan's molded, UV-stabilized nylon trapeze handle. Skipper and crew's trapeze can be color-coded for easy identification. Use this page to order #21-0171B Blue and #21-0171R Red. Ronstan Part# PNP171BLU or PNP171RED
    RONSTAN TRAPEZE HANDLE
    Ronstan
    Ronstan Series 20 Ball Bearing Block with Series 20 block linked at 90 Degrees Murrays Part# 21-2028 As used on the Murrays No-Cut Hi-Low Trapeze Adjustment Kit. Precision molded Acetal sheaves run on stainless steel or Torlon® ball bearings to provide high performance and low friction. The Ronstan back-to-back blocks have 3/4" sheaves and 1/4" maximum line diameter. Maximum working load is 550 lbs.; breaking load is 1210 lb. Weighs only 1.1 oz. Ronstan part #RF20284.
    RONSTAN SERIES 20 BALL BEARING BLOCK WITH SERIES 20 BLOCK LINKED AT 90 DEGREES
    Ronstan
    Small Fairlead: 1-1/4 X 1/2 Murrays Part# 23-0921 Stainless steel fairlead measurements: A = 1-1/4" (31.4mm) between holes center-to-center B = 1/2" (12.7mm) height C = 3/16" (5mm) hole diameter
    RONSTAN SMALL FAIRLEAD: 1-1/4 X 1/2
    Ronstan
    Ronstan Curved Surface Base/Riser for Medium Cam Cleats Murrays Part# 21-5016 Ronstan riser/curved surface adapter fits medium C-Cleat and T-Cleat. Use on round surface such as mast or crossbar. Ronstan Part# RF5416
    RONSTAN CURVED SURFACE BASE/RISER FOR MEDIUM CAM CLEATS
    Ronstan
    Ronstan 3/16 Twisted D Shackle Murrays Part# 21-0628 Stainless steel twisted D-shackle has a 3/16" pin.
    RONSTAN 3/16" TWISTED D SHACKLE
    Ronstan
    Shackle Pin Only 1/4 Threaded Murrays Part# 21-0033 Threaded stainless pin fits 1/4" Ronstan D or bow shackle.
    SHACKLE PIN ONLY 1/4" THREADED
    Ronstan
    Ronstan Superflex Slipper with Strap have a soft web sole which gives positive grip and greater range of movement, making this shoes ideal for trapezing. The 2mm slippers are comfortable and ultra-light for mild climates and freedom of movement. The internal toe separator provides improved stability and there is an arch strap for a secure fit. A Glide skin ankle seal minimizes water entry. These slippers feature a multi-layer padded heel, ankle and toe protection and a pull-tab on the heel.
    RONSTAN SUPERFLEX SLIPPER WITH STRAP
    Ronstan
    RONSTAN WAVE MAINSHEET BASE BLOCK
    Ronstan
    Ronstan Stainless Steel D Shackle, 1/4" Murrays Part# 21-0617 UDL BL - The “Uniformly Distributed Load” breaking load of the shackle; the load is applied across the full span of the shackle pin. PL BL - The “Point Load” breaking load of the shackle; the load is only applied at the center or one side of the shackle pin. Ronstan solid stainless steel shackle has 1/4" pin diameter. Having a spare on hand may mean the difference between sailing or not!
    RONSTAN STAINLESS STEEL D SHACKLE, 1/4"
    Ronstan
    Ronstan Swiveling Fairlead & Cam Cleat for 3-12mm Rope Murrays Part# 21-0058 Swivel cam cleats are ideal for main traveler control and up-release jib cleating systems. Swivel cleat bases permit easy cleating and releasing from any angle. Dead eyes contain stainless steel liners for low friction and long life. Cleating plates are heavy gauge alloy for stiffness and minimum distortion under load. Cam cleats and fairleads should be selected on the basis of need. Order plastic base pads with fasteners
    RONSTAN LARGE SWIVEL CLEAT WITH FASTRACK
    Ronstan
    Mini Bullet Block Murrays Part 23-0911 As used in the Murrays No-Cut EZ-Up Trap Ring Return Kit. Mini bullet block has 1-3/16" sheave, Teflon® bearing and 5/16" line capacity. Hobie Cat® uses #3103 for this block.
    MINI BULLET BLOCK
    Ronstan
    Series 19 C-Track Track Fastener: 4mm (5/32”) countersunk fasteners at 75mm (3") centers Stop Holes: 19mm (3/4") centers Installation: Requires 19-5024 countersunk rivets Applications Dinghy and small catamaran jib sheet leads Adjustable hiking strap systems Dinghy outhauls Ronstan Part# RC9190
    RONSTAN SERIES 19 C-TRACK
    Ronstan
    Ronstan Tie Ball Red 32mm (1 1/4") Diameter Convenient way to terminate control lines while also providing a textured grip for pulling. Recess in one side to contain the stop knot.
    RONSTAN TIE BALL-RED
    Ronstan
    Ronstan Sticky Fingerless Race Glove CL730 provide hand protection, a secure grip, and reduce fatigue by minimizing the physical effort required to hold rope. Features: Amara synthetic leather for maximum durability, minimum stretch and shrinkage. Double Aramid stitching in high wear areas. Double thickness palm and fingers for protection and grip. UPF 50 (Ultra-Violet Protection Factor). Mesh panels for flexibility, comfort and quick drying. Low-cut neoprene
    RONSTAN STICKY FINGERLESS RACE GLOVES
    Ronstan
    Ronstan 5/16 bow with hole shackle RF638 - Hobie 20700001 and SP150081
    RONSTAN 5/16" BOW SHACKLE WITH HOLE
    Ronstan
    Ronstan Figure 8 Trapeze Ring Murrays Part# 25-3610 Original equipment for Hobie® trapeze systems, the figure 8 ring is 6" long with 1-1/2" rings.
    RONSTAN FIGURE 8 TRAPEZE RING (EACH)
    Ronstan
    S19 Alloy C-Track End Cap Pair Only Murrays Part# 21-91980 The S19 Alloy C-Track End Cap Features Spring-loaded plunger stops allow fast, positive positioning of track slides Slides are available with swiveling cleat and fairlead to suit different crewing position
    RONSTAN SERIES 19 C-TRACK END CAP (2)
    Ronstan
    Ronstan Rope Guide for Small Cam Cleats Murrays Part# 21-5404 A comprehensive range of specialist cleat accessories allow customization of the cleat setup to optimize performance by controlling inward lead, outward lead, cleating and nucleating angle and height.
    RONSTAN ROPE GUIDE FOR SMALL CAM CLEATS
    Ronstan
    Ronstan Medium "C-Cleat" Cam Murrays Part# 21-5010 Lightweight and durable with quick response and easy entry/exit effort. Outstanding grip, corrosion resistant (no aluminum cams). Fast Track Fairlead option permits widest range of cleating angles without need for rotation. Saves complexity, weight and cost for barberhauler control cleats. 1/8" to 1/2" line; SWL 400 lbs.
    RONSTAN MEDIUM "C-CLEAT" CAM
    Ronstan
    Ronstan Urethane Universal Joint Murrays Part# 21-3133 Smooth, uniform rotation in all directions and a quick, firm response to steering movements. The RF3133 universal joint with snap-on cover is designed to allow quick fitting and removal of the tiller extension from the fixed base. Includes urethane universal, heat shrink tubing, and two-piece mounting base. Universal Joint: Urethane tiller extension universal joint. Suits 13.5mm (17/32") ID Tube
    RONSTAN URETHANE UNIVERSAL JOINT
    Ronstan
    Series 15 BB Block, Single Loop Top Murrays Part# 21-15101 The Series 15 BB Block, Single Loop Top is the smallest and lightest ball bearing block available. With a precision molded acetal sheave running on stainless steel ball bearings that provide high performance low friction. It has a single loop head blocks include an O-ring to separate running line from head lashing or fixing. Applications: Dinghy control lines Vangs, cunninghams and tweakers Shock cord tensioning systems
    RONSTAN SERIES 15BB BLOCK, SINGLE LOOP TOP
    Ronstan