All Sailing Parts

All Sailing Parts

2261 products

    Everything Nacra, Prindle, Hobie and a few more fun odds and ends.

    2261 products
    HEAVY DUTY SWIVEL WITH ALUMINUM CAM & BULLSEYE
    Murrays Sports
    Ronstan Multi-Purpose Tool Murrays Part# 21-1320 The Ronstan Multi-Purpose Tool is a screwdriver with two shackle sockets and wrench for #8, 10 and 1/4" nuts as well as metric nuts. The 3/4"- thick plastic body provides better grip than flat stainless tools. Suits both coined and slotted shackle pins, and small nylon-insert nuts
    RONSTAN MULTI-PURPOSE TOOL
    Ronstan
    Alpha SSR Racing Sheet 5mm Red
    13/64" SSR RACING SHEET 5MM
    AlphaRope
    Out of Stock
    HOBIE HALYARD GRIP KIT The Hobie Halyard grip kit is a mast hook that hold the jib halyard off center on the mast so that the jib battens don't hang up on the jib halyard when tacking. Mostly used on the Hobie 16. Hobie part number 114
    HOBIE HALYARD GRIP KIT
    Hobie
    Oxen self-holding blocks offer a real advantage over blocks with cleats! Get fast, simple mainsheet (and jibsheet) control: just pull-to-cleat, then pull-to release! Cleat or uncleat your jib or mainsheet every time without looking and from any position. Cleat from any angle or position on the boat, including the wings, even if your sheet passes over something en route. Oxen blocks are easy to install and foolproof to use.
    Oxen block with becket - Hobie, Nacra, Prindle, jib sheet, main sheet
    3" OXEN BLOCK WITH PIN & BECKET
    Oxen
    N-5.2 MAIN HALYARD WITH SHACKLE
    Murrays Sports
    Prindle 18 Forestay 5/32" Black with Turnbuckle Murrays Part# 002-2345-42 Forestay with turnbuckle for Prindle 18 is constructed to factory specifications.
    PRINDLE 18 FORESTAY 5/32" BLACK WIRE WITH TURNBUCKLE
    Murrays Sports
    Prindle 18 Shroud 5/32" Black Wire Roller Swaged Murrays Part# 002-2305-12 One single black shroud (sidestay) for Prindle 18 is constructed to factory specifications. Hydraulic swaging produces a cleaner, stronger shroud.
    PRINDLE 18 SHROUD 5/32" BLACK WIRE ROLLER SWAGED
    Murrays Sports
    Quick-Release Convenience Package: H16 Murrays Part# 001-3231 This package makes set-up and take-down of your Hobie 16® more convenient. Kit includes: One #18-4R125 Quick Release Pin for hiking stick to crossbar connection. One #18-3M075L Quick Release Pin with Lanyard for mainsheet block to traveler car connection. One #21-1032 Quick Twist Halyard Shackle for jibsheet blocks to jib clew boom to mast connection. One #21-1155L Toggle Pin with Lanyard for forestay to adjuster connection. Four #01-0127 Car
    H-16 QUICK RELEASE CONVENIENCE PACKAGE
    Murrays Sports
    he comfortable, 6" adjustable foot straps feature 7mm neoprene padding to comfortably accommodate bare feet or sailing shoes. Their pre-formed arch eliminates collapsing and the exterior hook and loop closure system allows for quick and easy adjustment. Drilling instructions and self-tapping screws are included.
    DAKINE CATAMARAN FOOTSTRAP KIT (PR)
    Dakine
    Screw 12x24x1 Pan Head (Long Lock) Murrays Part# 50-8030402 This screw is used to hold the rudder gudgeons on the back of the boat.  Hobie Part# 8030402
    SCREW 12x24x1 PAN HEAD (LONG LOCK)
    Hobie
    Hobie EZ Loc Rudder Linkage Murrays Part# 50-50313201 Replacement rudder linkage for Hobie EZ Loc style rudder assemblies.  Hobie Bravo, Getaway and Wave Hobie Part# 50313201
    HOBIE EZ LOC RUDDER LINKAGE
    Hobie
    Wave Trampoline Tension Wire Murrays Part# 50-38970051 This is the wire that goes through the side of a Hobie Wave Classic trampoline and hooks into the hooks on the hulls to tension the tramp.
    WAVE TRAMPOLINE TENSION WIRE
    Murrays Sports
    Hobie Wave Bow Spreader Tang Murrays Part# 50-38120041 Replacement tang for Hobie Wave bow spreader. Hobie Part# 38120041
    WAVE BOW SPEADER TANG
    Hobie
    Hobie® factory replacement part for Hobie 20-style tiller connector and adjuster kit (#07-1953). Hobie part number 40550001. Murrays.com - In stock
    Hobie 1953 tiller connection kit - new style
    HOBIE THREADED TILLER CONNECTOR END CAP 1953
    Hobie
    H18 Mast Base Casting-Black Murrays Part# 50-60641031 Hobie® factory replacement black mast base casting for Hobie® 18. Use four #19-5032 rivets for installation.
    H-18 MAST BASE CASTING-BLACK
    Hobie
    Hobie Wave EZ Loc Rudder Assembly Murrays Part# 50-39312000 EZ Loc rudder assembly for the Hobie Wave. Hobie Part# 39312000
    WAVE EZ LOC RUDDER ASSEMBLY
    Hobie
    Out of Stock
    Hobie Boom Blocker Hanger  Murrays Part# 50-10760000 Hobie factory boom block hanger for the Hobie 14, 16, 17 and 18. Hole spacing is 1-1/8".  Use four 6-4 rivets (#19-5031) for installation.
    HOBIE BOOM BLOCKER HANGER
    Hobie
    Screw PHMS 1/4-20 X 1" Stainless Steel Murrays Part# 19-3020 Stainless steel, slotted pan head 1/4-20 x 1" machine screw to fasten mast bearing on pre-1990 Hobie® 18. Other uses include universal Prindle/Nacra bow plate and bow tang on Prindle 15/16/18/Escape. Replaces Murrays item #56-F125.
    1/4-20 X 1" Stainless Steel Screw
    Misc
    Ronstan Series 20 Utility Block, Tube Rivet Murrays Part# 21-0661 Rontan's cheek block is a Hobie® 18 and Prindle downhaul and turning block. Stainless steel cheeks and Acetal sheaves ensure a long service life with virtually no maintenance. Hollow rivets in the block heads can be fitted with shackles, which can also be used to add a becket for extra purchase.
    RONSTAN MIDGET SINGLE BLOCK (CHEEK)
    Ronstan
    Clamcleat Leech Line Cleat Murrays Part# 27-0212 Jib halyard tensioning cleat for zippered luff jibs. The low-profile, white nylon Clamcleat® can be sewn or riveted onto sails and technical fabrics. It can be mounted in two positions on the sail. The tooth design allows a quick, positive lock that is easy to release. It is an ideal cleat for adjusting leech lines. Use a backplate when riveting a cleat onto fabric, as it will prevent the rivet pulling through. Includes: backing plate and 2x flare rivet
    CLAMCLEAT LEECH LINE CLEAT
    Clamcleat
    Hobie 16 Aussie jib halyard kit
    Hobie 16 aussie jib halyard kit
    H16 AUSSIE JIB HALYARD KIT
    Murrays Sports
    HOBIE WAVE SUREFOOT EVA KIT P&S - GREY
    Murrays Sports
    O'Pen Skiff Rudder Mount Top Murrays Part# 65-53270 Upper stainless steel needle Tahe Part# 53270
    O'PEN SKIFF RUDDER MOUNT TOP
    Tahe Outdoors
    Ronstan Small Soft Shackle - 4mm SK78 Murrays Part# 21-DSH4 The Robline Small Soft Shackle is a great alternative to the metal shackle, with no clevis pins to loose in the water or sand. Soft shackles are also very easy on the boat as they are soft and flexible Quick and easy way to attach jib clew blocks to the jib and the main sheet blocks to the main sail.
    ROBLINE 4MM SMALL SOFT SHACKLE SK78
    Robline
    H20 Outhaul Bearing Murrays Part# 50-40250001 Hobie® factory replacement outhaul bearing for Hobie 20. This part is installed into the outhaul car outside of the boom, it keeps the car from falling down into the car slot. Hobie Part# 40250001
    H-20 OUTHAUL BEARING
    Hobie
    Out of Stock
    Swivel Cam Cleat Pad Murrays Part# 50-11900010 Replacement base pad for your H16 jib car cleats or Mainsheet on most Hobie Cat sailboats. Hobie Part# 11900010
    SWIVEL CAM CLEAT PAD
    Hobie
    Tiller Tie Bar Fitting with Tendon Murrays Part# 56-4536 Tiller tie bar fitting with tendon fits all Inters
    NACRA TILLER TIE BAR FITTING WITH TENDON
    NACRA
    CINCH RING 3/8 10mm (X-2) EACH Stainless steal cinch ring for use on 3/8" shock cord or line. Sold Individually. Hobie part 53180010
    CINCH RING 3/8 10mm (X-2) EACH
    Misc
    CINCH RING 5/16 8mm
    Misc
    RIVET SOLID BRASS 6-6 (3/16x3/8") Solid Brass 3/16" x 3/8" rivet is designed to be set with a hammer. Commonly used to secure sail luff plates, clew plates, tack plates and headboards.
    RIVET SOLID BRASS 3/16"
    Misc
    Prindle 16 Shroud 1/8" Coated Wire - HD Single shroud (sidestay) for Prindle 16 is constructed to factory specifications. Made with 316 Stainless steal 1x19 PVC coated wire. Double swaged marine thimble on the top and a Hydrolic swaged marine eye on the bottom for increased strength and longevity. Prindle part number 9000
    PRINDLE 16 SHROUD 1/8" WIRE HEAVY DUTY
    Murrays Sports
    Prindle 16 trapeze wire part number 9000 The Murrays Double Trapeze is a set of 4 black or white coated trap wires with 4 handles for double trapezing. A single thimble per pair of handles eliminates clutter at that mast connection. Order shock cord, harness loops and adjustment kits separately. A complete trapeze system requires the following: Harness loop - Can't Miss Ring or Dogbone Trap Shock Cord Trap Adjustment kit Sailing Harness ​Trapeze adjustment kits (#001-1121, 001-1130 or 001-1140, purchased
    Prindle 16 white trapeze wire
    PRINDLE 16 DOUBLE TRAPEZE (4)
    Murrays Sports
    Compare to Hobie part number 37980055 Hobei getaway Forward trampoline
    GETAWAY FORWARD TRAMPOLINE 2017-2020
    Murrays Sports
    Ronstan Sticky 3-Finger Gloves The Ronstan Sticky 3-Finger Gloves provide extra warmth and protection over half-finger gloves. Ronstan Sticky Race Gloves provide hand protection, a secure grip, and reduce fatigue by minimizing the physical effort required to hold rope. While keeping the thumb and pointer finger free for dexterity
    RONSTAN STICKY 3-FINGER GLOVES
    Ronstan
    Sale
    Forward Thermo Neo Socks The Forward Thermo Neo Socks are perfect for sailing in cold conditions. Add with the Semi Dry Hybrid Suit to turn it into a completely sealed suit. The intricate multi-panel design is built for a true shape providing comfort by removing unnecessary stitching and bulk. The soles have a new non-slip screen print which provide better grip on slippery surfaces. The smooth neoprene on the upper part of the sock ensures a tight connection with the Hybrid Semi Dry suit.
    FORWARD THERMO NEOPRENE SOCKS
    Forward Wip
    Save $20
    Nacra Rudder Blade Cushion Use these cushions to trim your rudder blades in the casting.
    NACRA RUDDER BLADE CUSHION
    NACRA
    Out of Stock
    Tiller Crossbar Adjustable Cap Kit Murrays Part# 50-6040000M Murrays Tiller Crossbar connection kit is a complete kit to connect the Hobie tiller cross bar and tiller arms. This is modeled after the original design but with some upgrades. We use 2 adjustable end caps to extend the overall adjustment length. Allows users shorten their tiller crossbar due to corrosion. 2 adjustable caps also allows users to adjust the crossbar length from either end of the bar. The tiller crossbar
    TILLER CROSSBAR ADJUSTABLE CAP KIT
    Murrays Sports
    PRINDLE 15/16/18 SHROUD ANCHOR PIN
    Misc
    NACRA URETHANE TILLER TIE BAR ROD WITH STRING
    NACRA
    Recently viewed