Hobie mast parts: cheek block, downhaul, halyard, mast head, base, bearing, ball, luff track

Sailing Mast Parts

219 products

    Hobie, Nacra and Prindle mast parts: Halyard cleat, cheek block, gooseneck, downhaul, mast head, mast base, mast hinge, mast bearing, mast ball 

    219 products
    Out of Stock
    MAST ASSY H20
    Hobie
    $2,950.00
    Out of Stock
    MAST ASSY W/COMPTIP Hobie 16 BLACK
    Hobie
    $2,540.99
    Out of Stock
    hobie-18-mast-60610010
    MAST ASSEMBLY H18 BK
    Hobie
    $2,345.00
    WAVE MAST ASSEMBLY 2PC 1438UP
    Hobie
    $1,884.99
    Wave Comp Tip

Murrays Part# 50-38582100

Hobie® factory replacement CompTip for Wave. A CompTip is the upper section of a Hobie mast. Fiberglass and non-conductive, it was designed to prevent electrocution by contact with a high power line.
    WAVE COMP TIP
    Hobie
    $1,550.00
    Out of Stock
    MAST GETAWAY LOWER
    Hobie
    $1,284.99
    COMPTIP GETAWAY
    Hobie
    $1,252.99
    Out of Stock
    COMPTIP H20 OS
    Hobie
    $1,109.00
    Out of Stock
    Comp-Tip Assembly H16
Murrays Part# 50-20611100
New Comp Tip assembly for Hobie 16.
Hobie Part# 20611100
    COMP-TIP ASSY H-16
    Hobie
    $1,010.99
    Out of Stock
    COMP-TIP ASSY H17
    Hobie
    $979.00
    Out of Stock
    COMP-TIP ASSY H18
    Hobie
    $939.00
    WAVE LOWER MAST
    Hobie
    $792.99
    COMPTIP H14 ASSY (OS)
    Hobie
    $769.00
    Out of Stock
    BRAVO LOWER MAST
    Hobie
    $516.99
    UNIVERSAL MAMA BOB MAST FLOAT

The Hobie Mama Bob Universal Mast Float Kit aids in preventing your boat from going full turtle (mast straight down) when capsized, helping to prevent damage to your rig and sails should they contact the bottom. This model (Hobie® Cat #30112) is mast-side mounted system. The Universal Mama Bob float has been adapted for use as a shaft-mounted "universal" mast float that does not rotate, but is held in a fore-aft position in alignment with the mast for minimum drag while
    MAST FLOAT UNIVERSAL MAMA BOB
    Hobie
    $366.99
    This Hobie 16 Rigging set is a set of rigging for a Hobie 16 that was standard in 1995. This is a perfect upgrade your 70s, 80s, early 90’s boat to make it more modern.
    H-16 RIGGING KIT: 1995 SPEC BLACK RIGGING
    Murrays Sports
    $350.00
    Downhaul Kit 8:1 H18
Murrays Part# 001-2150
This is a performance upgrade downhaul kit that give increased performance control for your Hobie 18 Catamaran. The downhaul leads are run to the side of the boat for crew control and the loads are oriented to reduce sail tack damage that is common on the H18. It takes minutes to install with a rivet gun a drill and approximate measuring.
The kit was born from a discussion at the 2023 NACs wherein many of the boats in Division 4 have a variation of the
    H-18 DOWNHAUL KIT 8:1
    Murrays Sports
    $310.00
    Mast Float Mama Getaway

Murrays Part# 007-30119
    MAST FLOAT MAMA GETAWAY
    Hobie
    $251.99
    Out of Stock
    MAST BASE H17/20/TIGER BLACK
    Hobie
    $240.99
    H16 Aluminum Masthead

Murrays Part# 51-16042710
    H-16 ALUMINUM MASTHEAD
    Hobie
    $225.00
    Downhaul Kit: 6:1 Hobie 14/16

Murrays Part# 007-2089

This Class-legal, complete 6:1 downhaul kit for Hobie 14 or 16 comes with Harken Carbo block. Includes Class-approved attachment for base of mast, all hardware and line. Use with gooseneck bearing kit (#12-2050).

Hobie Part# 2089
    Downhaul Kit: 6:1 Hobie 14/16


Murrays Part# 007-2089

This Class-legal, complete 6:1 downhaul kit for Hobie 14 or 16 comes with Harken Carbo block. Includes Class-approved attachment for base of mast, all hardware and line. Use with gooseneck bearing kit (#12-2050).

Hobie Part# 2089
    H-14/16 6:1 DOWNHAUL KIT
    Murrays Sports
    $225.00
    Out of Stock
    Bravo Mast Float With Straps And Buckles

Murrays Part# 50-90600012



Hobie Bravo mast flat with strap. Found on current Bravo sailboats.
    BRAVO MAST FLOAT WITH STRAPS AND BUCKLES
    Hobie
    $205.99
    HOBIE 18 POWER DOWNHAUL KIT - 5:1
Get powerful downhaul adjustment from any sailing position. This Class-legal, 5:1 downhaul kit for Hobie® 18 includes a space-saving bracket with becket, two Harken bullet cheek blocks, Harken pivoting exit block with micro cleat, Harken double bullet block, trim line, fasteners and instructions.
    H-18 5:1 POWER DOWNHAUL KIT
    Murrays Sports
    $205.00
    The Hobie Baby Bob Mast Float is designed to offer the safety and security of mast head flotation with minimized drag through the air, the Baby Bob is fixed in position to the mast head with the included mounting hardware.

The Baby Bob is standard on all Hobie Waves This float will also fit the Getaway and Hobie 16 with or without CompTip. Some drilling may be necessary. The larger Mama Bob (#07-30119) is also an option for most Hobies.

The Baby Bob Mast Float displaces 32 pounds of water, is 20" long x 1
    MAST FLOAT WAVE BABY BOB
    Hobie
    $202.99
    H14/16 Mast Bearing (Pack of 100)

Murrays Part# 001-2042



Teflon® mast bearings for Hobie® 14 or 16 are .06" thick and will form to mast base with first use. Package of 100 mast chips.
    H14/16 MAST BEARING (100-PKG)
    Murrays Sports
    $200.00
    Out of Stock
    Mast Sunfish
    Laser Performance
    $198.00
    H14/16 6:1 Downhaul Kit
Murrays Part# 007-2089-1
This Class-legal, complete 6:1 downhaul kit for Hobie 14 or 16 comes with Harken Carbo blocks. 

Includes: Class-approved mast track attachment, all hardware and line.

Recommended for use with gooseneck bearing kit (#012-2050)

Hobie Part# 2089
    Downhaul Kit: 6:1 Hobie 14/16
This Class-legal, complete 6:1 downhaul kit for Hobie 14 or 16 comes with Harken Carbo blocks.
Includes: Class-approved mast track attachment, all hardware and line.
Recommended for use with gooseneck bearing kit (#012-2050).
Hobie part number 2089
    H-14/16 6:1 DOWNHAUL KIT
    Murrays Sports
    $185.00
    Downhaul Kit 3:1 Wave

Murrays Part# 001-2029


This is a HCA and Formula Wave Class Legal downhaul kit. The Hobie Wave is a simple boat, and this simple kit helps make downhaul adjustments quick and easy. Installs in minutes with a Philips head screw driver.

This can also be an intermediate downhaul kit for the H16 for recreational use, it's not class legal for HCA racing.
    Downhaul Kit 3:1 Wave

Murrays Part# 001-2029


This is a HCA and Formula Wave Class Legal downhaul kit. The Hobie Wave is a simple boat, and this simple kit helps make downhaul adjustments quick and easy. Installs in minutes with a Philips head screw driver.

This can also be an intermediate downhaul kit for the H16 for recreational use, it's not class legal for HCA racing.
    WAVE DOWNHAUL KIT 3:1
    Murrays Sports
    $175.00
    Out of Stock
    H14 and Wave Comptip Masthead

Murrays Part# 50-10602111




This is a replacement masthead for a Hobie 14 or Hobie Wave.
    H-14 AND WAVE COMPTIP MASTHEAD
    Hobie
    $159.99
    Out of Stock
    Comp-Tip Mast Head H16
Murrays Part# 50-20614001
Hobie® factory replacement mast head with sheaves. Use four #19-5032 6-6 rivets for installation. This is the standard Hobie Part that comes with all comptip masts on Hobie 16s.
This CompTip mast head also replaces the obsolete Hobie 16 mast head (no longer available) for all-aluminum mast. The original halyard will work if you move the halyard hook down to the appropriate height. Alternatively, a new comptip halyard #02-0273-60
    COMP-TIP MAST HEAD H-16
    Hobie
    $159.99
    COMP-TIP LUFF TRACK (NO Hobie 16)87"
    Hobie
    $159.99
    GETAWAY LUFF TRACK 102"
    Hobie
    $154.99
    P18, P18.2 DIAMOND WIRE WITH TURNBUCKLE
    Murrays Sports
    $145.00
    H20 Diamond Wire Double without Turnbuckle

Murrays Part# 002-0795-20

Diamond wire double (includes both sides) for Hobie® 20 is constructed to factory specifications. Without turnbuckle.



Compare to Hobie Cat® Part# 41750001
    H-20 DIAMOND WIRE DOUBLE WITHOUT TURNBUCKLE
    Murrays Sports
    $145.00
    MAST ROTATOR WISHBONE ASSEMBLED
    NACRA
    $140.00
    Out of Stock
    Hobie Bravo Comptip

Murrays Part# 50-90611001



Mast comptip for the Hobie Bravo mast assembly.

Hobie Part# 90611001
    HOBIE BRAVO COMPTIP
    Hobie
    $139.00
    Carbon Mast Head

Murrays Part# 56-6602CAR


Nacra mast head for a carbon mast.

Nacra Part# 6602Car
    CARBON MAST HEAD
    NACRA Austrailia
    $136.00
    Carbon Mast Base Casting

Murrays Part# 56-6605CAR

The Nacra Carbon Mast Base Casting is a replacement mast base casting for Inter 17, 18, 20 and Nacras with a carbon masts. Replaces the 56-6626, Nacra Sailing item #30178 mast base which is no longer being made.  Does not include any fixtures for downhaul sheaves. Made in Australia.

If your mast is aluminum, you need a different part!
    CARBON MAST BASE CASTING
    NACRA Austrailia
    $136.00
    N-5.8 DIAMOND WIRE WITH TURNBUCKLE
    Murrays Sports
    $130.00
    H-16 AUSSIE JIB HALYARD KIT
    Murrays Sports
    $129.00