All Sailing Parts

1789 products

    1789 products
    Hobie 16 mast bearings. Teflon mast chips, Hobie part number 11110005
    Hobie mast chips - 11110005
    MAST BEARING H-14/16 (3-PKG)
    Murrays Sports
    Universal Drain Plug for most Hobie, Nacra and Prindle Catamarans which includes a gasket and fits most Hobie, Nacra and Prindle catamarans. Hobie part number 10091000
    Hobie drain plug 10091000 Hobie 18
    DRAIN PLUG W/GASKET
    Misc
    Rudder Stiffening Kit Murrays Part# 001-2053 The Rudder Stiffening Kit for all Hobies eliminates excessive clearances between rudders and castings which cause wobble and thwart rudder alignment. Kit has 4 stainless nylock nuts and 8 spacers. Compare to Hobie Cat® item #136.
    RUDDER STIFFENING KIT
    Murrays Sports
    Hobie rudder bushing. Hobie part number 8062001
    RUDDER TITE BUSHING EACH
    Murrays Sports
    Murrays Part# 001-2050 The Hobie Rudder Cam Kit: Hobie 14, Hobie 16 are replacement rudder cams to keep the rudder lock-down mechanism on your Hobie Cat® functioning properly. The Hobie® 14 or 16 kit includes two cams, two reusable, internally threaded sister screws for both sides, and instructions. Purchase the complete kit if your boat has the stock flare pins; purchase just the cams (#50-10480000 each) if your boat already has sister screws.  Compare to Hobie Cat® #5202.
    HOBIE RUDDER CAM KIT: H-14/16
    Murrays Sports
    3/16 - 1/4" Split Ring Murrays Part# 22-9492 Stainless steel split ring (ring ding) for 3/16″-1/4″ diameter clevis pin. This is the standard size Hobie split ring used all over the boats, most commonly on the shrouds, forestay and roller furler Medium Split ring Dimensions: 5/8″ Diameter Material: 316 Stainless steel. This is the most common size Split ring on Hobie, Nacra and Prindle Catamarans. 20860000 Medium Clevis Ring.
    SPLIT RING 3/16-1/4"
    Misc
    MAST HINGE KIT: H/16
    Murrays Sports
    Murrays Can't miss rings, trapeze harness ring, J&H Handles, Hobie part number 2004BLK, dog bone, trap handle
    Murrays Can't miss rings, trapeze harness ring, J&H Handles, Hobie part number 2004BLK, dog bone
    CAN'T MISS RINGS
    Murrays Sports
    RUDDER LOCKING KIT Hobie 16 Murrays Part# 50-10311900 Hobie factory rudder locking kit for Hobie 14 or 16 includes one each plunger, 2-1/2" spring (#50-10432000), and Delrin screw. Delrin screw is 3/4-10 thread. In many cases you can drill it out with a 5/8" drill bit and then get a 3/4-10 tap to clear the threads.
    RUDDER LOCKING KIT H14/16 - 10311900
    Hobie
    The Murrays Hobie 16 main halyard for is constructed to factory specifications with a long rope section and a shorter wire section with a stopper and halyard shackle. 20617001
    H-16 MAIN HALYARD COMPTIP
    Murrays Sports
    Out of Stock
    Aluminum Adjustable tiller extension for Hobie, Nacra and Prindle catamarans. Compare to Hobie 20550001 Hobie hot stick
    ALUMINUM TILLER EXTENSION 50"-95"
    Murrays Sports
    Halyard Cleat Kit with Rivets Murrays Part# 001-1019 The Murrays Halyard Cleat Kit with Rivets pulls the halyard out of the way to keep the battens from hanging up on the halyard of an H16. The kit includes the halyard cleat and sealed stainless rivets. Center-to-center hole spacing is 31mm. *Photo is out of date and kit no longer comes with casings as the rivets that are included come sealed. Compare to Hobie Cat Part 10730000
    HALYARD CLEAT KIT W/ RIVETS
    Murrays Sports
    10 Hole Hobie shroud adjuster
    SHROUD STAY ADJUSTER 10-HOLE
    MISC
    HOBIE RUDDER CAM - 10480000
    HOBIE RUDDER CAM - 10480000
    Hobie
    RUDDER CAM KIT: H-17/18/20/21
    Murrays Sports
    Ronstan Stainless Steel Bow Shackle, 5/16" Pin, Coined Head with Hole Murrays Part# 21-0636 The Ronstan 5/16 Bow Shackle has 5/16" diameter pin. Compare to Hobie® #20700001 and SP150081. Standard all Hobie, Nacra and Prindle catamarans to attach the standing rigging to the mast tang.
    RONSTAN STAINLESS STEEL BOW SHACKLE, 5/16" PIN, COINED HEAD WITH HOLE
    Ronstan
    Hobie trapeze shock cord 20730001 and 20730002
    TRAP SHOCK CORD H-14/16
    Murrays Sports
    Hobie Cat #80550005 Main sail batten pocket protector kit. Hobie, Nacra, Prindle.
    SAIL POCKET PROTECTOR KIT MAIN
    Murrays Sports
    1/4" Bow Shackle Ronstan PN RF635
    1/4" BOW SHACKLE
    Ronstan
    Ronstan Stainless Steel Bow Shackle, 3/16" Pin, Coined Head Murrays Part# 21-0634 Solid stainless steel bow shackle has 3/16" diameter pin.  UDL BL - The “Uniformly Distributed Load” breaking load of the shackle; the load is applied across the full span of the shackle pin. PL BL - The “Point Load” breaking load of the shackle; the load is only applied at the center or one side of the shackle pin.
    RONSTAN STAINLESS STEEL BOW SHACKLE, 3/16" PIN, COINED HEAD
    Ronstan
    MAST STEP LINK KIT H14/16 Hobie part number 21380001
    MAST STEP LINK KIT H14/16
    Hobie
    3/16 - 1/4" Split Ring with Pigtail Murrays Part# 22-9491 A pigtail makes this split ring (ring ding) easier to open than standard split rings. For use on 3/16″ – 1/4″ clevis pins Material: 316 Stainless steel. Medium Split ring Dimensions: 5/8″ Diameter This is the most common size Split ring on Hobie, Nacra and Prindle Catamarans. Applications: All Hobies Shroud and Forestay split ring H18/ Hobie 18 SX – Tiller Yoke Clevis Pin Ring Also called Ring Ding, Clevis Ring, Cotter Ring or Ringy Ding
    SPLIT RING 3/16-1/4" PIGTAIL
    Misc
    Tiller Connection Kit Murrays Part# 001-2061 The Murrays Tiller Connection Kit assures consistent rudder alignment through the full rudder sweep. Spring-loaded half balls and contoured spacers take the slop out of the tiller-to-crossbar connection on Hobie Cats. Racing class legal. Each kit contains 2 connectors to join the tiller crossbar to the tiller arms. Compare to Hobie Cat® #3052. Applications:; Hobie 14, 16, 17, 18, 18SX
    TILLER CONNECTION KIT (PR)
    Murrays Sports
    Rope Lock (Nylon) Murrays Part# 001-0120 Easy-to-adjust black rope lock commonly used for trapeze height adjustment. Standard rope stop on Hobie®, Nacra and Prindle. Double-up back-to-back for extra strength. Hobie part number 61530000 for this rope lock. Works on 3/16 to 1/4" line
    ROPE LOCK
    Murrays Sports
    TELO-CAT BRIDLE VANE
    Davis
    RUDDER CASTING DELRIN SCREW - rudder locking adjustment screw - 60450000
    HOBIE RUDDER SCREW - 60450000
    Hobie
    Mast Step Pin Wave/Getaway .25 x 2" Detent Murrays Part# 50-8020451 Replacement mast step pin / mast hinge pin for a Hobie Wave and Getaway. 1/4" x 2" detent pin.   Hobie part # 8020451
    MAST STEP PIN .25x2.2 DETENT
    Hobie
    Kit for Hobie® 14 or 16 includes 16 pieces: mast hinge pin, clevis pin assortment and split ring assortment. Compare to Hobie Cat® #30303.
    PINS & RINGS KIT: H-14/16
    Murrays Sports
    DOWNHAUL CLEAT W/SCREWS
    Murrays Sports
    SHROUD STAY ADJUSTER 7-HOLE
    Murrays Sports
    JIB HANK H-16 & SOL CAT
    Hobie
    Hobie 16 gooseneck bearing kit. Tren Tec. Murrays Marine. Hobie Cat part number #1511
    Murrays Gooseneck Bearing Kit Hobie 14 & 16 instructions
    GOOSENECK BEARING KIT H-14/16
    Tren-Tec
    Murrays Part# 001-0062 Replacement tiller yoke assembly for all hiking sticks sold by Murrays. Used to connect the tiller extension to the tiller crossbar. Includes two contoured spacers that provide a solid platform for the yoke to sit on. Compare to Hobie Cat® Tiller yoke assembly #3205 or NACRA connection part tiller/joystick #31072 Applications: All Hobies and Prindles Tiller Yoke Assembly: 1
    YOKE ASSEMBLY W/ SPACERS
    Murrays Sports
    Rivet Casing 6-10(3/16 X 5/8) Murrays Part# 19-5020 Hobie part number 8011291 Rivet sleeve that seals rivets, to prevent water from passing through them.; Recommended for all mast rivets on the mast.
    RIVET CASING 6-10(3/16 X 5/8)
    Hobie
    Murrays Part# 001-4045 Mast Bearing Kit enables smooth mast rotation on the Hobie® 18. The kit includes a new mast bearing, stainless steel washers and Teflon washer. To mount, use one #19-3019 screw (included) for post-1990 Hobie 18 or one #19-3020 screw (sold separately) for pre-1990 Hobie 18.  Compare to Hobie Cat® #1132 (bearing and Teflon™ washer).
    MAST BEARING KIT: H-18
    Murrays Sports
    Hobie 18 Mast Base Hinge casting 60650011
    H-18 Mast Base Hinge
    Murrays Sports
    Hobie Shroud Anchor Pin Hobie 16, 17 and 18. 20100000 20100010
    SHROUD ANCHOR PIN Hobie 16/17/18 Updated
    Murrays Sports
    Hobie 16 Main Halyard with Shackle is a wire halyard for the all-aluminum mast (no Comp-Tip) Hobie 16 and is used to raise the main sail. Compare to Hobie Cat® #20651011
    H-16 MAIN HALYARD WITH SHACKLE
    Murrays Sports
    Cotter Pin 3/32 X 3/4 Murrays Part# 19-1015 Cotter pins are used on all Hobie, Nacra and Prindle rudder pins. They are used to secure the rudder pins. Compare to Hobie Cat® #8060111. Stainless steel cotter pin measures 3/32" x 3/4".
    COTTER PIN 3/32 X 3/4
    Misc
    Mast Hinge H-16 (Only) Murrays Part# 25-3360 Heavy duty mast base hinge for Hobie® 16 only (does not fit Hobie 14). Clevis pins are sold separately. NOTE: This kit does not fit the newer style Hobie 16s, does not work on post 1993 Hobie 16s with the extreme mast rake, or on older boats with an updated mast step. The way to tell is if your mast step has a horizontal mast base then it is old style, new style has a slant toward the stern.
    MAST HINGE H-16 (ONLY)
    Murrays Sports