Sailboat rigging, Hobie, Nacra, Prindle, Sol cat, Dart, and more.  Made to order. Murrays.com

Rigging

446 products

    Murrays rigging is made to order in Carpinteria California by seasoned rigging professionals using premium materials and tooling.  All made to factory spec lengths. Main Halyard, jib halyard, forestay, shroud, bridles, diamond wires, roller furling jib

    446 products
    Out of Stock
    1/2″ Hollow Braid Line Hobie righting line Hobie part number RL012BLU
    1/2" HOLLOW BRAID LINE
    Pelican Rope
    $1.10
    Stainless steel clevis pin. Measurement is 1/4" diameter x 5/8" grip length. Hobie part number 8020361, 8020381 and 8020380.
    1/4 X 5/8" CLEVIS PIN
    Misc
    $2.00
    1/4″ Dacron Spun Braid Line

The low-stretch characteristics and soft, fuzzy surface of this rope offer excellent grip and make it easy on the hands. The spliceable line has a 100% polyester braided core with a spun polyester braided cover.

Uses: Easy on the hands alternative to 1/4″ control line, downhaul, trapeeze adjustment, barber hauler, tramp lacing, Jib sheet etc.

Brand and Model: Robline Neptun 500 6mm

Diameter: 1/4″ – 6mm

Sold per foot

Spool: 323′ (100m).

Compare to Hobie Cat® #RM014XXX/RM014
    1/4″ Dacron Spun Braid Line

The low-stretch characteristics and soft, fuzzy surface of this rope offer excellent grip and make it easy on the hands. The spliceable line has a 100% polyester braided core with a spun polyester braided cover.

Uses: Easy on the hands alternative to 1/4″ control line, downhaul, trapeeze adjustment, barber hauler, tramp lacing, Jib sheet etc.

Brand and Model: Robline Neptun 500 6mm

Diameter: 1/4″ – 6mm

Sold per foot

Spool: 323′ (100m).

Compare to Hobie Cat®#RM014XXX/RM014
    White Black
    1/4" DACRON SPUN BRAID 6MM
    Robline
    from $0.68
    Standard Polyester Yacht Braid 1/4" White
Murrays Part# 39-3141
1/4″ Double Braid Halyard Line
1/4″ Double Braid Halyard Line is ideal for halyard line on Hobie, Narca and Prindle catamarans.
Our 1/4″ Halyard Line features a polyester core and a polyester cover. Making it easy to splice, taper or customize to fit your needs.
This highly versatile rope combines low stretch with high strength offering dependability and unsurpassed resistance to abrasion, sunlight, sea salt and common chemic
    1/4" STANDARD POLYESTER YACHT BRAID WHITE 6.35MM
    Pelican Rope
    $0.58
    halyard, outlhaul, downhaul, trampoline lacing and control line.  For use on all Dinghies, Beach Catamarans, Nacra, Prindle, Hobie cats as well as big boats.
    White Black Blue Red
    1/4" VERY LOW STRETCH CONTROL LINE 6MM
    Pelican Rope
    from $0.70
    Use this 1/8″ Dacron line for batten tie line and roller furling systems. For batten ties, allow about 18″ of line for each batten.   Sold per foot.   Spool: 1000′ (304.9m).  Compare to Hobie part number RH112WHT - 8004510
    1/8" DACRON SOLID BRAID
    Misc
    $0.14
    Low Stretch 8-Strand 1/8 Black
Murrays Part# 39-2309BK
The result of design technology combining low-stretch, high strength and chafe resistance into one rope. Similar to Prestretched, but its softer, less textured finish means less friction in multi-purchase systems. Made in the USA. Sold per foot. Spool: 250' (76.2m). Compare to white Hobie Cat® line #RH018WHT or RH112WHT.

We recommend this line for use on batten ties and roller furling line, Prindle jib halyards and Prindle tramp lacing. This is
    1/8" LOW STRETCH 8-STRAND 3MM
    Pelican Rope
    $0.32
    Hobie Shroud Adjuster Covers 11″ Pair are vinyl covers that protect the crew from metal shroud adjusters and can prevent de-masting by protecting the split rings. Includes two adjuster covers, one for each side of the boat. Available in white and black.  Compatible with al beach cats: Nacra, Prindle, A-Cat, Dart, Sol Cat, G-Cat...
    White Black
    11" SHROUD ADJUSTER COVERS
    Hobie
    from $19.99
    Red Blue
    13/64" DINGHY CONTROL LINE 5mm
    Robline
    $0.99
    Alpha SSR Racing Sheet 5mm Red
    13/64" SSR RACING SHEET 5MM
    AlphaRope
    $0.85
    Blue Purple
    15/64" ROBLINE DINGHY CONTROL LINE 6MM
    Robline
    $1.40
    Prindle 16 Bridle 1/8"
The Prindle 16 Bridle is a single 1/8" bridle wire for the Prindle 16 catamaran. Constructed to factory specifications. Available in White, Black or Bare wire.
Prindle Part Number 9002 - Prindle wire rigging made by Murrays Marine
    18SQ BRIDLE 5/32" BLACK WIRE
    Murrays Sports
    $80.00
    H18 Diamond Wire Complete

Murrays Part# 50-61750001

Replacement Hobie 18 diamond wire assembly, including the turnbuckle, diamond wire roller and end fittings.
    18SQ DIAMOND 1/8" BARE
    Murrays Sports
    $105.00
    Nacra 5.7 Double Trapeze (4 handles)


The Murrays Double Trapeze is a set of 4 black or white coated trap wires with 4 handles for double trapezing. A single thimble per pair of handles eliminates clutter at that mast connection.
Order shock cord, harness loops and adjustment kits separately.

A complete trapeze system requires the following:
Harness loop - Can't Miss Ring or Dogbone
Trap Shock Cord
Trap Adjustment kit
Sailing Harness

​Trapeze adjustment kits (#001-1121, 001-1130 or 001-1140, purchased se
    18SQ DOUBLE TRAPEZE 3/32" BLACK WIRE (4)
    Murrays Sports
    $120.00
    18SQ Forestay 5/32 Black
Murrays Part# 002-5045-02
Black coated forestay for your NACRA 18 Square built to original specifications.
    18SQ FORESTAY 5/32 BK
    Murrays Sports
    $105.00
    The Murrays Hobie 16 Roller Swaged Shroud is an upgrade to the stock shroud or sidestay for the Hobie 16. We use a hydraulic swager exerts a force of over 10,000 pounds to quickly swage without work-hardening the stainless fittings. Hydraulic swaging produces a cleaner, stronger shroud.
    18SQ SHROUD 5/32" BLACK WIRE
    Murrays Sports
    $105.00
    9mm Robline Racing Pro is ideal for use on all Hobie, Nacra and Prindle catamarans as well as many dingy classes including 49er, 29er, 420, Laser, and RS Feva.  Great for use as a Main sheet, Jib sheet, or spin sheet.
    Blue Red Black
    23/64" RACING PRO 9mm
    Robline
    $2.00
    Alpha SSR 10mm Racing Sheet
    Blue Black
    25/64" SSR RACING SHEET 10MM
    AlphaRope
    $2.09
    Oxen self-holding blocks offer a real advantage over blocks with cleats! Get fast, simple mainsheet (and jibsheet) control: just pull-to-cleat, then pull-to release! Cleat or uncleat your jib or mainsheet every time without looking and from any position. Cleat from any angle or position on the boat, including the wings, even if your sheet passes over something en route. Oxen blocks are easy to install and foolproof to use.
    Oxen block with becket - Hobie, Nacra, Prindle, jib sheet, main sheet
    3" OXEN BLOCK WITH PIN & BECKET
    Oxen
    $279.00
    3/16 - 1/4" Split Ring with Pigtail
Murrays Part# 22-9491
A pigtail makes this split ring (ring ding) easier to open than standard split rings.

For use on 3/16″ – 1/4″ clevis pins
Material: 316 Stainless steel.
Medium Split ring
Dimensions: 5/8″ Diameter
This is the most common size Split ring on Hobie, Nacra and Prindle Catamarans.
Applications:
All Hobies Shroud and Forestay split ring
H18/ Hobie 18 SX – Tiller Yoke Clevis Pin Ring
Also called Ring Ding, Clevis Ring, Cotter Ring or Ringy Ding
    3/16 - 1/4" SPLIT RING WITH PIGTAIL
    Misc
    $0.75
    3/16 X 7/8" Clevis Pin

Murrays Part# 22-9806




3/16 x 7/8 Clevis Pin.  H16 gooseneck shackle clevis pin.

Hobie Part# 8020061
    3/16 X 7/8" CLEVIS PIN
    Misc
    $3.50
    3/16" Split Ring - 7/16″ Diameter
Murrays Part# 22-9490
Stainless steel split ring for 1/8-3/16″ diameter clevis pins. Comparable to Hobie Cat® #81503100 Small Clevis Ring. This is a super small size, best for locations where you may be concerned about it snagging on something. The small size helps prevent it from snagging on lines, sheets, sails and clothing.
    3/16" SPLIT RING
    Misc
    $0.50
    3/16 VLS Control Line -VLS stands for Very Low Stretch. It is a double braid control line, meaning it has a core and exterior sheath for strength and duability. The smooth exterior texture is easy on your hands, is durable and grips well in cleats.
    White Black Blue Red
    3/16" VERY LOW STRETCH CONTROL LINE 5MM
    Pelican Rope
    from $0.55
    3/16 - 1/4" Split Ring
Murrays Part# 22-9492
Stainless steel split ring (ring ding) for 3/16″-1/4″ diameter clevis pin. This is the standard size Hobie split ring used all over the boats, most commonly on the shrouds, forestay and roller furler
Medium Split ring
Dimensions: 5/8″ Diameter
Material: 316 Stainless steel.
This is the most common size Split ring on Hobie, Nacra and Prindle Catamarans. 20860000 Medium Clevis Ring.
    3/16-1/4" SPLIT RING
    Misc
    $0.75
    3/32 TURNBUCKLE STUD
    3/32 STUD10/32 RH THD
    Misc
    $33.00
    Split Ring

Stainless steel split ring for 5/16″-3/8″ diameter clevis pins. The larger size makes it easier to get on and off.

Large Split ring

Dimensions: 3/4″ Diameter

Material: 316 Stainless steel.

Also called Ring Ding or Ringy Dingy.

Hobie Part number 20860010 – RF686
    3/4" SPLIT RING
    Misc
    $1.00
    Dacron Spun Braid 3/8″

The Dacron Spun Braid 3/8″ is very low-stretch sheeting line and has a soft, fuzzy surface that offers excellent grip and make it easy on the hands. It features a 100% polyester braided core with a spun polyester braided cover. The 3/8″ diameter is ideal for mainsheets on Hobies, Nacra and Prindle Catamarans. Sold per foot. Spools come in 600′. We recommend Dacron Spun Braid line for recreational cat sailors, it has a nice hand feel, cleats well and runs thru the blocks well. D
    White Black Blue Red
    3/8" DACRON SPUN BRAID 9MM
    Robline
    from $1.05
    Dacron Spun Braid 5/16

The Dacron Spun Braid 5/16 is very low-stretch and has a soft, fuzzy surface that offers excellent grip and make it easy on the hands. Ideal for use as a jib or spin sheet. 100% polyester braided core with a spun polyester braided cover. Sold per foot. Spools are 600′. Dacron Spun Braid is a very soft and durable line at an economical price. If you are interested in a premium sheeting line we recommend Robline Racing sheet Pro.

Use this page to order product numbers 39-05
    White Black Blue Red
    5/16" DACRON SPUN BRAID 8MM
    Robline
    from $0.80
    Alpha SSR Light Racing Sheet 8mm
    5/16" SSR LIGHT RACING SHEET 8MM
    AlphaRope
    $1.25
    Alpha SSR 8mm Racing Sheet - main sheet
    Blue Red Green
    5/16" SSR RACING SHEET 8MM
    AlphaRope
    $1.65
    Blue Black Red
    9/32" RACING PRO 7MM
    Robline
    $1.45
    Can't Hurt Trap Rings

Murrays Part# 001-0123

Can't Hurt Trap Rings are a light and flexible alternative to "hard" stainless steel dogbones. Black high pressure nylon tubing covers 1/8" (1x19) stainless wire.

Compare to Hobie Cat® #2003.

Sold in pairs
    CAN'T HURT TRAP RINGS (PR)
    Murrays Sports
    $20.00
    Murrays Can't miss rings, trapeze harness ring, J&H Handles, Hobie part number 2004BLK, dog bone, trap handle
    Murrays Can't miss rings, trapeze harness ring, J&H Handles, Hobie part number 2004BLK, dog bone
    CAN'T MISS RINGS
    Murrays Sports
    $45.00
    Stainless steel cinch ring is also known as a hog ring. Use shock cord seizing pliers for a smooth installation; standard pliers can give a suitable cinch.
    CINCH RING 1/4" 6mm (X-0)
    Misc
    $0.18
    CINCH RING 3/8 10mm (X-2) EACH

Stainless steal cinch ring for use on 3/8" shock cord or line.

Sold Individually.

Hobie part 53180010
    CINCH RING 3/8 10mm (X-2) EACH
    Misc
    $0.18
    CINCH RING 5/16 8mm
    Misc
    $0.18
    Clevis Pin 1/4X3/8

Murrays Part# 50-8020371





This is commonly used for Hobie Rigging parts. It has a 3/8" grip length. You can also use the 1/2" grip length pins also.

Hobie Part# 8020371 or 8020370
    CLEVIS PIN 1/4 x 3/8"
    Hobie
    $1.99
    Cotter Pin 3/32 X 3/4
Murrays Part# 19-1015
Cotter pins are used on all Hobie, Nacra and Prindle rudder pins. They are used to secure the rudder pins. Compare to Hobie Cat® #8060111.
Stainless steel cotter pin measures 3/32" x 3/4".
    COTTER PIN 3/32 X 3/4" SS
    Misc
    $0.18
    Alpha Rope Cruiser 24 6mm Grey

Murrays Part# 39-4606gy

Cruiser 24 Kmix from Alpha Ropes is a great all around line for sheets and control lines. This 6 mm double braid line is light weight and offers great grip. It features strong HT polyester core with 24 plait polyester cover for great durability and grip.
    Cruiser 24 6mm Grey
Murrays Part# 39-4606gy
Double braid. 16 strand HT Polyester core, 24 braid HT Polyester cover.
All around, great performance
Ideal for sheets and control lines
    CRUISER 24 6MM GREY
    AlphaRope
    $0.55
    Hobie Sol Cat 18 Trapeze Wires
(2 Handles)



Trapeze Wire set for single trapeze.

Use this page to order product numbers:

002-6253-01
002-6253-02
    DART 18 TRAPEZE BLACK WIRES (2)
    Murrays Sports
    $80.00
    Recently viewed