All Sailing Parts

All Sailing Parts

2261 products

    Everything Nacra, Prindle, Hobie and a few more fun odds and ends.

    2261 products
    Hobie® factory replacement end cap for Hobie 20-style tiller connector and adjuster kit (#07-1953). Hobie part number 40561001 and 40561000
    Hobie 1953 tiller connection kit - new style
    H-20-1995 & LATER TILLER CONNECTOR END CAP
    Hobie
    H14/16/18/20/Wave Rudder Cam Stop Plate Murrays Part# 50-20352000 Hobie factory replacement rudder cam plate for Hobie 14, 16, 17, 18 (1987 and later) and Wave (with aluminum castings). Hobie Part# 20352000
    H-14/16/18/20/WAVE RUDDER CAM STOP PLATE
    Hobie
    Out of Stock
    Hobie Wave Hull Seal Cap Murrays Part# 50-38370001 Hobie® factory replacement hull seal for under the seat pad on Wave. Hobie Part# 38370001
    WAVE HULL SEAL CAP
    Hobie
    Out of Stock
    HOBIE POCKET PROTECTOR KIT
    Hobie
    H14/16 Gooseneck Shackle Murrays Part# 50-10772020 Hobie factory replacement gooseneck shackle for Hobie 14 and Hobie 16. Uses a 3/16 x 7/8" clevis pin to connect to the main sail tack. Quick release upgrade option is the 3/16 x 3/4" Quick Release Pin, part #18-3M075L Some newer boats and racers replace the downhaul ring with a second Gooseneck Shackle.
    H-14/16 GOOSENECK SHACKLE
    Hobie
    H20 Upper Forestay 5/32" Black Wire with Roller Furling Murrays Part# 002-0735-02 Black upper forestay for Hobie® 20 with roller furling setup. Constructed to factory specifications. Compare to Hobie Cat® Part# 40810011
    H-20 UPPER FORESTAY 5/32" BLACK WIRE WITH ROLLER FURLING
    Murrays Sports
    H20 Jib Halyard Roller Furling Murrays Part# 002-0786-00 Jib halyard for Hobie® 20 with roller furling is constructed to factory specifications. Order 24' of #39-0221 1/8" Dacron line for jib halyard line. Compare to Hobie Cat® Part# 48661001
    H-20 JIB HALYARD ROLLER FURLING
    Murrays Sports
    H-16 3-PIECE MESH TRAMPOLINE-BLACK
    Murrays Sports
    1/2 BALL (NYLON) - Hobie half round washer spacer tiller connector - Hobie part number 11510000 HOBIE HALF SPHERE TILLER CONNECTOR
    Tiller Connection Kit Murrays Part# 001-2061 The Murrays Tiller Connection Kit assures consistent rudder alignment through the full rudder sweep. Spring-loaded half balls and contoured spacers take the slop out of the tiller-to-crossbar connection on Hobie Cats. Racing class legal. Each kit contains 2 connectors to join the tiller crossbar to the tiller arms. Compare to Hobie Cat® #3052. Applications:; Hobie 14, 16, 17, 18, 18SX
    NYLON 1/2" BALL
    Murrays Sports
    Out of Stock
    EASY RIGG TOOL RED
    Murrays Sports
    WING MOUNT KIT (1 EACH) Murrays PN 50-65071001 Hardware mounting kit for Hobie 18 Magnum and SX wings.  Includes: 2 x Wing Slug - Threaded post 2 x 5/16 -18 threaded nylock nuts 2 x 5/16 -18 Socket Screw
    WING MOUNT KIT (1 EACH) 65071001 Hardware mounting kit for Hobie 18 Magnum and SX wings.  Includes: 2 x Wing Slug - Threaded post 2 x 5/16 -18 threaded nylock nuts 2 x 5/16 -18 Socket Screw
    WING MOUNT KIT (1 EACH)
    Murrays Sports
    O’Pen Skiff Tiller End Plug Murrays Upgrade Murrays Part# 65-316970 The O’Pen Skiff Tiller End Plug Murrays Upgrade is the solution to a weak point on the O’Pen Skiff boat. This upgrade replaces the two standard tiller end plugs that go on each pintle. Only two are required instead of four because the Murrays Tiller end plug is solid and spans the whole distance inside the rudder housing. So you don't need two per pintle only per rudder.
    O'PEN SKIFF TILLER END PLUG (MURRAYS UPGRADE)
    Murrays Sports
    Out of Stock
    Nacra Rear Beam Tramp Tie Buttons Murrays Part# 56-30883 The NACRA Rear Beam Tramp Tie Buttons are the black nubs that are riveted on to the rear beam to hook the tramp lacing around. These are used on many boats and are installed with a 3/16 1/2" rivet. These can likely also be used on a Hobie Getaway, Miracle 20 or others that are looking to use a smaller Dyneema line instead of the 3/16 or 5/32 line Nacra Part# 30883
    NACRA REAR BEAM TRAMPOLINE TIE BUTTONS
    NACRA
    The Staymaster Turnbuckle - No more hit-and-miss wire tensioning! Shorten your diamond wires and use an adjustable tension mechanism to easily repeat tension settings
    STAYMASTER TURNBUCKLE 1/8
    Staymaster
    H16 Jib Sail (White) Murrays Part# 50-20992010 This is an OEM Hobie White Jib for the Hobie 16 sailboat. This is class legal for One Design Hobie Racing. This sail includes batten ties
    H-16 JIB SAIL (WHITE)
    Hobie
    Made from 18 stainless steel these set screws are chemical resistant and may be mildly magnetic. They have a thin edge that digs into the contact surface for a secure hold. Length listed is the overall length. Screw for the Hobie 18 wing mount kit. 65071001
    SOCKET SCREW 5/16-18 x 2"
    Misc
    DAIMOND CUT EVA FOAM DECK/RAIL GRIP SHEET 40x62" Peel and stick diamond cut EVA foam sheet for rail and deck grip on all Hobie, Nacra, Prindle catamarans, Surfboards, Paddleboards, Dingy, Keel boat traction. Easy to install traction pads for Hobie rails and hulls. EVA foam does not absorb water, adds some padding as well. Sheets can be cut into strips for anywhere traction or padding is wanted or it can be used to cover the hull for padding grip and UV protection. Great for older boats as well
    DAIMOND CUT EVA FOAM DECK/RAIL GRIP SHEET
    Misc
    The Selma fid (needle) is the only tool for splicing all kinds of rope. Selma fids are made of highly polished stainless steel. Made in Norway and patented worldwide. Please note that the appropriate fid size will depend on the type and construction of line. The purchase of a set of 4 or 5 fids may be a better option if you are unsure of the fid size you need.
    SELMA FID 7.5mm 5/16-3/8"
    Selma
    H-14 TURBO BRIDLE 1/8 One bridle for Hobie 14 Turbo constructed of 1/8" 1x19 wire to factory specifications. Turbo typically refers to the Hobie Factory Version that features a Hobie Roller furling drum, bridles connect to the drum with forks, and an under tramp jib block wire. Use this page to order product numbers: 02-0114-21 White (compare to Hobie Cat® #10820011) 02-0114-22 Black bridle for Hobie 14 Turbo (compare to Hobie Cat® #10822010 black) Murrays PN 002-0114-21 and 002-0114-22
    H-14 TURBO BRIDLE 1/8" WIRE
    Murrays Sports
    Hobie Main Sail Headboard w/ rivets Replacement Hobie factory Hobie Main Sail Headboard w/ rivets. Hobie part #68330011
    HOBIE ALUMINUM HEADBOARD WITH RIVETS
    Hobie
    Nylon Spacer Murrays Part# 56-4011 Prindle rudder spacer, Prindle part number 4011.
    ILLUSTRATED PRNDLE RUDDER PARTS LIST
    PRINDLE RUDDER SPACER
    Murrays Sports
    Out of Stock
    Back by popular demand the Murrays Race Half Harness is perfect for recreational sailors and racers alike looking for a light weight, comfortable half harness. The Murrays Half Harness is a seat harness designed specifically with the Catamaran sailor in mind. The Murrays Half harness features internal battens to provide an amazing amount of back support with a low profile harness. This Butt Bucket style harness is compatible with the Magic Marine quick release hook system or the Murrays Ball Lock trapeze
    MURRAYS RACE HALF HARNESS-NO SPREADER BAR
    Murrays Sports
    H18 Black 3 Piece Trampoline Murrays Part# 30-3103 Murrays black mesh tramp for Hobie® 18 is not Class-legal for racing. Polypropylene mesh is the ideal material for beach cat tramps because it is light, strong and comfortable with very good UV resistance, plus it allows water to drain, so you won't be sitting in a puddle. The Hobie 18 version comes with a sewn in pocket in the front for your halyard and jib furling line.
    H-18 3PC MESH TRAMPOLINE-BLACK
    Murrays Sports
    H-16 ROLLER FURLING JIB KIT
    Murrays Sports
    Harken 57mm Carbo 8:1 System Murrays Part# 28-81 Lightweight, low profile and very strong, these Carbo AirBlocks® have enormous working range, with a higher working load than standard blocks, even though they are lighter in weight! The Carbo Ratchmatic® is a load-sensing ratchet block that rolls freely in both directions under low loads, and automatically engages the ratchet as loads increase.
    HARKEN 57mm CARBO 8:1 SYSTEM
    Harken
    Harken 57mm Carbo 10:1 System Murrays Part# 28-101 This system offers 10:1 purchase power! Light weight, low profile and very strong, these Carbo AirBlocks® have enormous working range, with a higher working load than standard blocks, even though they are lighter in weight. The base block has an on-off ratchet and will roll freely in both directions when disengaged, such as in light air. Engage the ratchet in heavy air when you need the mechanical advantage of the ratchet.
    HARKEN 57mm CARBO 10:1 SYSTEM
    Harken
    Harken Standard Carbo-Cam Cleat Murrays Part# 28-0365 Harken Cam-Matic® ball bearing cam cleats engage and release easily, hold securely, and work with a wide range of line types and sizes. Cam teeth are smooth to protect line and because tooth grip is not required to close the pawls. Multiple rows of UV-stabilized, Delrin® ball bearings provide minimal friction for easy line engagement and release, even under high loads.
    HARKEN STANDARD CARBO-CAM CLEAT
    Harken
    Harken 27mm Micro Eyestrap Murrays Part# 28-0281 Eyestraps are useful accessories. They form light-duty mounting bases for blocks, serve as lash-down points, and can be used for fairleads. Eyestrap for Cam-Matic 338, 423, 468, 471 Stainless steel eyestrap mounts on Harken aluminum Micro Cam-Matic (#28-0338) or Micro Carbo-Cam (#28-0423).
    HARKEN 27MM MICRO EYESTRAP
    Harken
    Hobie 16 Grey Mesh Trampoline OEM - Hobie Part #20970058
    H-16 MESH TRAMPOLINE-GREY
    Hobie
    Mini Bullet Block Murrays Part 23-0911 As used in the Murrays No-Cut EZ-Up Trap Ring Return Kit. Mini bullet block has 1-3/16" sheave, Teflon® bearing and 5/16" line capacity. Hobie Cat® uses #3103 for this block.
    MINI BULLET BLOCK
    Ronstan
    Stand Up Spring Conical Medium Murrays Part# 21-0320 This medium conical stand-up spring is used for Oxen blocks, OK car, etc.
    STAND UP SPRING CONICAL MEDIUM
    Murrays Sports
    Cat Trax Tire Only 21x12 Murrays Part# 13-1401-3 Replacement 21″x12.0-8 tire only (without rim) for Cat Trax beach wheels.
    CAT TRAX TIRE ONLY 21X12
    Cat Trax
    Quick Release Pin Detent 1/4 X 1" Murrays Part# 18-4D100 This quick pin has a spring-loaded ball that exerts sufficient pressure to help avoid accidental release. Measures 1/4" diameter x 1" long. Can be used to replace 1/4" clevis pins up to 1" long.  Not recommended for use in shroud adjusters or chain plates.
    QUICK RELEASE PIN DETENT 1/4 X 1"
    Misc
    Quick Release Deluxe Pin 1/4 X 1.25" Murrays Part# 18-4M125 This quick release pin features a push button on the top that releases 2 spring-loaded balls at the tip that secure the pin in place. Also available with a lanyard, see related items below. Uses: This pin is recommended for connection of hiking stick to crossbar on all Hobie, Nacra and Prindle catamarans. Also used on Hobie 18 SX and Hobie Magnum wings. Compare to Hobie part# 20306 PIN, QR 1/4 X 1-1/4 CUP
    QUICK RELEASE DELUXE PIN 1/4 X 1-1/4"
    Misc
    Out of Stock
    Mast Float Attachment Kit: H14/16 Murrays Part# 007-30116 This attachment kit for Hobie® 14 or 16 comes with Hobie® Mama and Baby Bobs, but is also offered separately here.
    H-14/16 MAST FLOAT ATTACHMENT KIT
    Hobie
    Out of Stock
    REPLACEMENT HOBIE WIND VANE Hobie part number CM7703
    REPLACEMENT HOBIE WIND VANE
    Murrays Sports
    Inter 20 Shroud 5/32" Black Wire Roller Swaged Murrays Part# 002-5405-12 Single black shroud for Inter 20 is hydraulically swaged to be clean and strong. Constructed to factory specifications.
    INTER 20 SHROUD 5/32"BLACK WIRE ROLLER SWAGED
    Murrays Sports
    H18SX Jib Halyard with Shackle Murrays Part# 002-0686-00 Jib halyard with shackle for Hobie® 18SX is constructed to factory specifications.; Use 20' of 1/8" line to to complete your jib halyard or our jib halyard kit with sister clips. links below in related items. Compare to Hobie Cat® Part# 68661001
    H-18SX JIB HALYARD WITH SHACKLE
    Murrays Sports
    Catamaran Universal Righting System Murrays Part# 001-8292 The Universal Righting System is simple and effective with large, 1/2" diameter, black polypropylene righting line that is light and easy to access and grip, even when wet. The line self-returns under the tramp after use. There are no knots to pre-tie or untie. The shock cord and pulleys provided hold line snug and are external, so they are easy to adjust and service. Fits 8' to 8'6" wide catamarans; ideal for boats with flush-deck trampoline.
    UNIVERSAL RIGHTING SYSTEM
    Murrays Sports
    Trap Shock Cord H17 Murrays Part# 001-3520 A trapeze shock cord is an absolute necessity because it keeps the trapeze system in place and ready for hook-up. One hook connects to either the thimble on the trapeze wire or the adjustment line, then runs under the tramp and connects to the other side in the same location. Shock cord comes with one plastic carbine hook installed; the other hook is installed after lacing shock cord through trampoline grommets. Cord is 1/4" diameter by 12' Sold Each
    H-17 TRAP SHOCK CORD
    Murrays Sports
    Recently viewed