Sailing Crossbar Parts

203 products

    203 products
    Hobie 16 mast bearings. Teflon mast chips, Hobie part number 11110005
    Hobie mast chips - 11110005
    H-14/16 MAST BEARING (3-PKG)
    Murrays Sports
    3/16 - 1/4" Split Ring Murrays Part# 22-9492 Stainless steel split ring (ring ding) for 3/16″-1/4″ diameter clevis pin. This is the standard size Hobie split ring used all over the boats, most commonly on the shrouds, forestay and roller furler Medium Split ring Dimensions: 5/8″ Diameter Material: 316 Stainless steel. This is the most common size Split ring on Hobie, Nacra and Prindle Catamarans. 20860000 Medium Clevis Ring.
    3/16-1/4" SPLIT RING
    Misc
    H16 Mast Hinge Kit Murrays Part# 001-3021 The Hobie 16 Mast Hinge Kit by Murrays aids in raising and lowering the mast of a Hobie® 16. Complete heavy duty hinge assembly includes special pins with retainers to prevent loss. This hinge requires complete removal before sailing. Note: This kit does not fit the newer style Hobie 16s, does not work on post 1993 Hobie 16s with the extreme mast rake, or on older boats with an updated mast step.
    H-16 MAST HINGE KIT
    Murrays Sports
    Aluminum Adjustable tiller extension for Hobie, Nacra and Prindle catamarans. Compare to Hobie 20550001 Hobie hot stick
    ALUMINUM TILLER EXTENSION 50"-95"
    Murrays Sports
    MAST STEP LINK KIT H14/16 Hobie part number 21380001
    H-14/16 MAST STEP LINK KIT
    Hobie
    Hobie 18 Mast Base Hinge casting 60650011
    H-18 MAST BASE HINGE
    Murrays Sports
    Murrays Part# 001-4045 Hobie 18 Mast Bearing Kit enables smooth mast rotation on the Hobie® 18. The kit includes a new mast bearing, stainless steel washers and Teflon washer. To mount, use one #19-3019 screw (included) for post-1990 Hobie 18 or one #19-3020 screw (sold separately) for pre-1990 Hobie 18. Compare to Hobie Cat® #1132 (bearing 60110000 and Teflon™ washer).
    H-18 MAST BEARING KIT:
    Murrays Sports
    Mast Hinge H-16 (Only) Murrays Part# 25-3360 Heavy duty mast base hinge for Hobie® 16 only (does not fit Hobie 14). Clevis pins are sold separately. NOTE: This kit does not fit the newer style Hobie 16s, does not work on post 1993 Hobie 16s with the extreme mast rake, or on older boats with an updated mast step. The way to tell is if your mast step has a horizontal mast base then it is old style, new style has a slant toward the stern.
    H-16 (ONLY) MAST HINGE
    Murrays Sports
    Mast Bearing Half Round Murrays Part# 56-2007 Half-round mast bearing for all Prindle mast steps. Nacra Sailing factory item# 30964
    MAST BEARING HALF ROUND
    NACRA
    RIVET MCP 6-8 3/16x1/2" PH Murrays Part# 50-8011231 Hobie® factory 6-8 heavy duty rivet requires a rivet tool for installation. 3/16" x 1/2" pan head. Fits Hobie Getaway Eyelet Post. Fits Hobie 20 Eyelet Post. Mounts Wave Mast Step Hobie part number 8011231
    RIVET MCP 6-8 3/16x1/2" PH
    Hobie
    Mast Ball H20/21/Getaway Murrays Part# 50-30110001 Hobie® factory replacement mast ball for Hobie® 20, 21 and Getaway. Ball measures 1-1/2" diameter with a 5/8"-18 threaded hole.
    H20/21/GETAWAY MAST BALL
    Hobie
    Mast Step Hinge Murrays Part# 56-6815 Designed and built to meet or exceed original OEM.  ​Mast step hinge for all Prindles. Use two #56-F128 mast step hinge pins. Nacra Sailing factory item# 30455
    MAST STEP HINGE
    Murrays Sports
    H14/16 Bow Tang Murrays Part# 50-20120000 Hobie® factory replacement bow tang for Hobie® 14, 16 or Getaway. Use #19-3530 screw and #19-2520 nylock nut on Hobie 16; use #19-3530 screw on Hobie 14. The original Hobie® 14 tang is no longer available. 20120010
    H-14/16 BOW TANG
    Hobie
    Quick Release Pin Deluxe  3/16 X 3/4" Murrays Part# 18-3M075 This Quick Release Pin features 2 locking balls for a extra secure grip, and a push button deluxe dished head with a hole for lanyard attachment. The Deluxe pin is quick and easy to remove and install, and makes getting on and off the water quicker and easier.
    QUICK RELEASE PIN DELUXE 3/16 X 3/4"
    Misc
    Nut Nylock 5/16-18 Stainless Steel Murrays Part# 19-2520 5/16-18 nylock nut is used on Hobie® rudders. The stainless steel hex nut with nylock insert will not rust or work loose if properly installed. Compare to Hobie Cat® item #8050311 and 8050321 shroud anchor pin nut Used with Hobie Getaway Bow Tang Bolt
    NUT NYLOCK 5/16-18 (SS)
    Misc
    H18 Traveler Cylinder Bearing Set Murrays Part# 50-61852000 Hobie® factory replacement cylinder bearing set for Hobie® 18 main traveler. Set includes one pair.
    H-18 TRAVELER CYLINDER BEARING SET
    Hobie
    Jib Traveler Cars for Original Track Murrays Part# 012-3020 Tren Tec's black plastic cars have four holes and slide freely in the track. Low profile shape saves needed space when mast is raked to the extreme. For 1996 and earlier Hobie 16s with external track that is riveted to the crossbar. Sold as a Pair. Hobie part number 1552 Sold in pairs
    JIB TRAVELER CARS (PAIR)
    Tren-Tec
    Murrays Original Hobie 14 & 16 Jib traveler car for pre 1994 boats with the external track on the front crossbar. 21230000
    MURRAYS H-14/16 JIB TRAVELER CAR
    Murrays Sports
    Rivet CCC 6-6 (3/16 X 3/8) Countersunk Murrays Part# 19-5024 Countersunk stainless steel 3/16" x 3/8" rivet for traveler tracks, etc. Compare to Hobie Part # 8010201. This rivets is what Hobie recommends for both the main traveler tack and the jib traveler track. We also recommend using an 1/8" stop sleeve, part number 002-1041, as a spacer to help you apply pressure on the rivet inside the track, as the track is too narrow for most rivet guns to get far enough inside to apply pressure to the rivet.
    RIVET CCC 6-6 CSK
    Misc
    Ronstan Bullseye with Ferrule Murrays Part# 25-0323 Stainless ferrule eliminates with nylon housing, the stainless center coating prevents grooving and wear from uses. Allows for up to 7/16" line capacity. Mounting: Two screws ordered separately (#10-32x1") part number 19-2915.
    RONSTAN BULLSEYE FAIRLEAD WITH FERRULE
    Ronstan
    Port-Lance Cleat Murrays Part# 007-359P The Lance Cleat - Port utilizes a single rugged aluminum alloy cam mounted vertically in a black molded frame. The rope slides in sideways and runs freely thru the fairlead, which has a colored roller incorporated in the top for easier sheeting and identification. Ideal for use in confined spaces. For use with 3/16 to 1/4" line. The base is 22mm x 30mm.
    PORT-LANCE CLEAT
    RWO
    Starboard-Lance Cleat Murrays Part# 007-359S The Lance Cleat - Starboard utilizes a single rugged aluminum alloy cam mounted vertically in a black molded frame. The rope slides in sideways and runs freely thru the fairlead, which has a colored roller incorporated in the top for easier sheeting and identification. Ideal for use in confined spaces. For use with 3/16 to 1/4″ line. The base is 22mm x 30mm.
    STARBOARD-LANCE CLEAT
    RWO
    Mini Cam Kit for Elliptical Surface Murrays Part# 001-0112 Mount a mini cam cleat, in any orientation, on almost any elliptical surface. Fits most elliptical surfaces: Hobie®, Nacra, Prindle masts and most others; Hobie and Prindle main beams, etc. You drill holes in the pad to suit your desired line/cleat orientation.
    MINI CAM KIT FOR ELLIPTICAL SURFACE
    Murrays Sports
    Ronstan Series 19 C-Track End Cap Murrays Part# 21-0366 These are End Stops for the new C-Track by Ronstan. Similar to the stainless tracks used on H18 and H16 in the past. Track end, plastic Best replacement for End stop for 5/8" jib track as on Hobie® 16 or Hobie® 18. The end stop can be fastened with #19-1620 screw or #19-5021 6-4 countersunk rivet. Compare to Hobie Cat part #20260000.
    RONSTAN JIB TRACK END CAP
    Ronstan
    H18 Mast Head/Base Sheave Murrays Part# 50-60620000 Factory replacement sheave for Hobie 18 mast head/base and outhaul assembly. Specs: 1" Diameter x 3/8" wide and 1/4" hole. Also used as traveler control line turning sheave on 2005 and newer Hobie 16 sailboats. Applications: Hobie 18 - Mast head halyard sheave ; mast base halyard sheave ; outhaul car sheaves. Hobie 16 - Jib Traveler line sheave. (in the H16 Race Corner Castings) use 50-8011251 Rivet
    H-18 MAST HEAD/BASE SHEAVE
    Hobie
    Murrays Part# 007-1051 The standard replacement deck plate for the traveler on all Hobie® 14, 16 and newer 17's. Hobie Cat® factory item #11870000.  Uses a 3/16 x 1/2" clevis pin to attach to the main sheet system. Also used in Hobie 14 and Hobie 16 upgrade downhaul systems to secure lower block. Sold individually
    TRACKER DECK PLATE (EA)
    Hobie
    Rivet CCP 6-8 (3/16 X 1/2) Murrays Part# 19-5033 Stainless steel 3/16" x 1/2" rounded pan head rivet. Compare to Hobie Cat® #8011231.
    RIVET CCP 6-8 (3/16 X 1/2)
    Misc
    Swivel Mount Base with Fasteners Murrays Part# 007-1162 The offset base pad kit fits Hobie® and Prindle elliptical crossbars. Includes injection-molded plastic base and fasteners. Replacement fasteners are also available (requires 3 self-tapping screws #19-1620, 1 machine screw #19-1516, and 1 nut #19-2016). Hobie Cat® Part# 1162
    SWIVEL MOUNT BASE WITH FASTENERS
    Hobie
    Rivet CCP 6-4 (3/16 X 1/4) Murrays Part# 19-5031 Stainless steel 3/16" x 1/4" rounded pan head rivet. Compare to Hobie Cat® #8010181. This is a common rivet used on many extrusions. Hobie, Nacra, Prindle masts and booms. Pair with a rivet casing to seal the rivet hole when used on masts. All Hobie mast hounds, tangs, heads, and cheek blocks. Used with Hobie Getaway Bow Spreader Plates Used on Hobie Getaway FWD and REAR Crossbar Stop Plates
    RIVET CCP 6-4 (3/16 X 1/4)
    Misc
    3/16 X 1/2" Clevis Pin Murrays Part# 22-9801 Stainless steel clevis pin measures 3/16" diameter x 1/2" grip length (shoulder to the split ring hole). Prindle / Nacra Part# 9412 Compare to Hobie Cat® Part# 8020041
    3/16 x 1/2" CLEVIS PIN
    Misc
    Hobie 18 main sheet traveler car assembly - Hobie part number 61800001 - Murrays.com
    Traveler Car Assembly H18 Complete - 61800001 - Murrays.com
    H-18 TRAVELER CAR ASSEMBLY
    Hobie
    H18 Mast Bearing Murrays Part# 50-60110000 Hobie Cat® factory mast bearing for Hobie 18. This part sits on the mast step to facilitate mast rotation on the Hobie 18. Hobie part# 60110000
    H-18 MAST BEARING
    Hobie
    Rivet MSP 6-10 3/16 X 5/8" PH Murrays Part# 19-5023 Rounded pan head 3/16" x 5/8" Monel rivet. Compare to Hobie Cat® Part# 8010121
    RIVET MSP 6-10 3/16 X 5/8" PH
    Hobie
    Jib Traveler Control Kit: Fixed Cam Murrays Part# 001-3112 A jib traveler system allows remote adjustment of the jib cars. This dramatically increases downwind speed and may help avoid a pitchpole caused by your crew moving leeward to make an adjustment by hand.
    JIB TRAVELER CONTROL KIT: FIXED CAM
    Murrays Sports
    Harken 1/4" Torlon Ball Bearing-21 Balls Murrays Part# 28-0177 1/4" Torlon replacement ball bearings fit Harken 158, 159, 172, 210, 212, 214, 215, 249, 440 and 441. A bearing loader, #28-HSB8 (sold separately), is required for installation. Sold in packages of 21
    HARKEN 1/4" TORLON BALL BEARING (21)
    Harken
    Harken 29mm Bullet Sheave Murrays Part# 28-0160 Harken's downhaul/halyard sheave makes raising the sail and/or adjusting the downhaul with Harken ball bearing sheaves much easier. This is a direct replacement for the sheaves that came with early Hobie 17s.
    HARKEN 29MM BULLET SHEAVE
    Harken
    Traveler Ball Bearing H18 Murrays Part# 50-61850000 The Traveler Ball Bearing H18 is the stock Hobie 18 Main sheet traveler car ball beaing. This ball can be used in place of cylinder bearing #50-61860000 to bring the traveler back to what came stock on the Hobie 18. The difference between the traveler ball and the cylinder is that the balls allow the car to move faster but they wear down quicker. Hobie has stopped making the Hobie 18 traveler balls, but Murrays found their source and made more!
    H-18 TRAVELER BALL BEARING
    Murrays Sports
    NUT SQUARE 10-32 Murrays Part# 50-8051301 Hobie® factory replacement stainless steel 10-32 square nut can be used when mounting downhaul/halyard cleat on Hobie® 14 or 16. Also can be used for mounting H17 trampoline eye straps. Use 19-2910 screw. Hobie Part# 8051301
    NUT SQUARE 10-32
    Hobie
    3/16 X 5/8"Clevis Pin Murrays Part# 22-9805 Stainless steel clevis pin. Measurement is 3/16" diameter x 5/8" grip length (shoulder to the split ring hole). Compare to Hobie Cat® Part# 8020041
    3/16 X 5/8" CLEVIS PIN
    Misc
    Sealed Rivet CCP 6-8 (3/16 X 1/2) Murrays Part# 19-5033S Sealed rivets have a sealed end that does not require rivet casings to make them water tight. One and done, no casing needed, just insert and pop as you would a normal rivet, and your hole will be sealed. Sealed Stainless steel 3/16" x 1/2" rounded pan head rivet. Compare to Hobie Cat® #8011231 Rivet and Hobie Cat® #8011291 rivet casing.
    RIVET CCP SEALED 6-8 (3/16 X 1/2)
    Misc