All Sailing Parts

All Sailing Parts

2266 products

Everything Nacra, Prindle, Hobie and a few more fun odds and ends.

2266 products

Sort

Hobie 18/21Sport Edition Boom Cleat Clamp

Murrays Part# 50-61711000M 

The Hobie boom clamp mounts the clamcleat (#27-0702) on to a Hobie 18 boom. Two boom clamps are required to mount one cleat.

This is a Murrays product, made with an Anodized aluminum body and a 316 stainless steal screw insert.  Made in California, USA.

Compare to Hobie part# 61711000 discontinued by Hobie

H-18/21SE BOOM CLEAT CLAMP

Harken Traveler Car Bearing Loader

HARKEN TRAVELER CAR BEARING LOADER

Harken 29mm Clew Block

Murrays Part# 28-0371

Harken's 29mm Carbo block assembly is designed to be sewn onto the clew of a sail. It can be used to replace the jib clew block on Hobie® 14 and 16. Specifications: 330 lb. SWL; 1000 lb. breaking strength; 5/16" maximum line diameter. 

On Hobie® 14 and 16, attach with #21-1032 twist pin halyard shackle.

Harken Part# 371

HARKEN 29MM CLEW BLOCK

UNIVERSAL MAMA BOB MAST FLOAT

The Hobie Mama Bob Universal Mast Float Kit aids in preventing your boat from going full turtle (mast straight down) when capsized, helping to prevent damage to your rig and sails should they contact the bottom. This model (Hobie® Cat #30112) is mast-side mounted system. The Universal Mama Bob float has been adapted for use as a shaft-mounted "universal" mast float that does not rotate, but is held in a fore-aft position in alignment with the mast for minimum drag while

MAST FLOAT UNIVERSAL MAMA BOB

Hobie Wave Keeper Pin With Lanyard

Murrays Part# 50-38490011

Hobie® factory replacement keeper wire with pin for Wave and Getaway.

Hobie part# 38490011

WAVE KEEPER PIN WITH LANYARD

V JAM CLEAT BOOM (3/16" HOLES)

Traveler Sheave H18 - 61890000

Murrays Part# 50-61890000

Hobie factory replacement sheave for Hobie 18 main traveler car.

Hobie Part# 61890000

H-18 TRAVELER SHEAVE

Murrays Part# 50-10432000
Hobie® factory 2½" spring for Hobie® 16 lower rudder casting. This spring is longer and stiffer than original equipment (#50-10430000), providing additional tension if you are having trouble with rudder kick up.
Used on Hobie 18 Rudder Systems from late 80s through now.
Used on Hobie 16 Rudder Systems after 1983
Used on Hobie Getaway Rudder Systems pre- EZ Loc
Hobie part number 10432000

HOBIE RUDDER SPRING-LONG

HOBIE ROLLER FURLING DRUM 1" NYLINER

HOBIE EPO3 RUDDER BLADE

H18 Diamond Wire Complete

Murrays Part# 50-61750001

Replacement Hobie 18 diamond wire assembly, including the turnbuckle, diamond wire roller and end fittings.

H-18 DIAMOND WIRE COMPLETE

Tracker Traveler Sheave Replacement Kit

Murrays Part# 007-1059

The standard replacement sheave for the tracker traveler on all Hobie® 14, 16 and newer 17's. 

Tracker is the term used by Hobie for the rear traveler car. This can also be considered a traveler sheave.

Fits Hobie Getaway Main Traveler Car.

Hobie® Part# 11880000

TRACKER TRAVELER SHEAVE REPLACEMENT KIT

Small Fairlead: 1-1/4 X 1/2
Murrays Part# 23-0921
Stainless steel fairlead measurements:
A = 1-1/4" (31.4mm) between holes center-to-center
B = 1/2" (12.7mm) height
C = 3/16" (5mm) hole diameter

RONSTAN SMALL FAIRLEAD: 1-1/4 X 1/2

Screw RHMS #12-24 X 1.25 Stainless Steel
Murrays Part# 19-3520
Stainless steel, round head #12-24 x 1.25" machine screw is a replacement screw for Hobie® rudder gudgeon.

SCREW RHMS #12-24 X 1.25 (SS)

NUT NYLOCK 1/2-13 (SS) THIN

HOBIE 14 MAIN HALYARD COMPTIP

This main halyard is used to raise the main sail on a Hobie 14 with CompTip on its mast. Constructed to factory specifications. Compare to Hobie Cat #10657001.

H-14 MAIN HALYARD COMPTIP

Hobie 18 Mastbase Hinge

Murrays Part# 50-60650011

Mastbase hinge for the Hobie 18. Factory supplied part for all Hobie 18 masts.

Mastbase hinge for the Hobie 18.
Does not include hardware for mounting.

HOBIE 18 MAST BASE HINGE

Ronstan Toggle Pin 15.9mm Long 6.4mm Diameter

Murrays Part# 21-1155

Replaces 1/4" diameter clevis pin of same grip length. Also available with a lanyard 21-1155L

RONSTAN TOGGLE PIN 1/4 x 5/8"

Ronstan Clevis Pin Retaining Clip

Murrays Part# 21-0413

The Ronstan Spring Clip is a stainless spring clip for quick rudder pin removal or Hobie 14, 16, 17, 18, 20, Wave and Getaway models. This handy little pin is also called a hairpin cotter, bridge pin, hitch pin clip or R clip. Great convenience item for all boats with rudder pins, ie: Hobie, Nacra and Prindle 15, 16, 18, 18-2, 19, 19MX, and Escape.

Ronstan Part# RF413

RONSTAN CLEVIS PIN RETAINING CLIP

Hobie 18 rigging set: Forestay, upper forestay, shrouds, bridles, trapeze wires

H-18 RIGGING KIT

Hobie 16 turquoise mesh trampoline Hobie 20970058

WAVE 3-PIECE CLUB TRAMPOLINE WITH TEFLON THREAD-LAKE BLUE

H-16 JIB BATTEN 67"

67" Murrays jib batten with a trentec batten cap.

Batten #1 in a Hobie 16 jib batten set - 20400001

H-16 JIB FIBERGLASS BATTEN 67"

Ronstan Superflex Slipper with Strap have a soft web sole which gives positive grip and greater range of movement, making this shoes ideal for trapezing. The 2mm slippers are comfortable and ultra-light for mild climates and freedom of movement. The internal toe separator provides improved stability and there is an arch strap for a secure fit. A Glide skin ankle seal minimizes water entry. These slippers feature a multi-layer padded heel, ankle and toe protection and a pull-tab on the heel.

RONSTAN SUPERFLEX SLIPPER WITH STRAP

1/4" DACRON SPUN BRAID 6MM

SAFETY HOOK KNIFE FORWARD
Murrays Part# 47-0700-2
Forward Hook Safety Knife, can be used in conjunction with the Forward Impact Vest.
The Forward impact vest has a special pocket inside the webbing sleeve to store a Forward Hook Safety Knife.

FORWARD SAFETY HOOK KNIFE

Ronstan Urethane Universal Joint

Murrays Part# 21-3133

Smooth, uniform rotation in all directions and a quick, firm response to steering movements. The RF3133 universal joint with snap-on cover is designed to allow quick fitting and removal of the tiller extension from the fixed base.

Includes urethane universal, heat shrink tubing, and two-piece mounting base.

Universal Joint:

Urethane tiller extension universal joint. Suits 13.5mm (17/32") ID Tube

RONSTAN URETHANE UNIVERSAL JOINT

POWERSTICK TELESCOPING CARBON TILLER EXTENSION 68-130"

HARKEN 4:1 MAIN SHEET SYSTEM

Powerstick Yoke

Murrays Part# 001-134-4

Replacement Powerstick tiller yoke

POWERSTICK YOKE

Bullseye Fairlead

Murrays Part# 22-7851

Bulls-eye fairlead has a 7/16" line capacity. Mount with two #10-32 x 1" screws (#19-2915).

BULLSEYE FAIRLEAD

H18 Main Adjustable Batten Leech Caps
Murrays Part# 012-4003
No more knots at the trailing edge. Adjust Hobie® 18 main sail shape in seconds without tying and untying knots. Release tension to prolong sail shape and life.
Hobie Part# 1523
Sold in packages of 10

H-18 MAIN ADJUSTABLE BATTEN LEECH CAPS (10)

Murrays Part# 001-0015

Need a little help? Use the Maxi Rigg tool to hand-hold spinnaker sheets or pull anchor lines up to 1/2" diameter with minimum strain on hands or grip. Hold and control spinnaker sheets. Unique safety swivel allows for easy and safe release of lines in case of sudden or too much pull. You can also use two to pull anchor lines hand-over-hand.

Assorted colors available

Line size: 5/16" to 1/2"

Hobie Cat® uses item #2069 for the Maxi Rigg Tool.

Hobie Bravo Batten Cap
Murrays Part# 50-9101100
Hobie batten cap for round battens
Sold individually

BRAVO BATTEN CAP

Hobie Pre EZ Loc Upper Pintle

Murrays Part# 50-38101301

Replacement upper pintle assembly for Hobie Wave and Hobie Getaway sailboats using the pre EZ loc style rudder assembly.

Original Equipment on Hobie Wave and Hobie Getaway sailboats
Upper pintle should be mounted with two (2) screws
Use Part# 8030171 for boats 2008 and older, or Part# 8030331 for 2009 and newer

If you have an EZ Loc style assembly, use the Hobie EZ loc upper pintle part# 90880211

Hobie Cat Part # 38101301

HOBIE WAVE/GETAWAY UPPER PINTLE - PRE EZ LOC

Jib Clew Plate 3-Hole

Murrays Part# 50-62270000

Hobie® factory replacement 3-hole jib clew plate (pair) with rivets.

Hobie 18 main sail clew plate

Hobie Part# 62270000

JIB CLEW PLATE 3-HOLE

Hobie Wave Hull Seal Cap

Murrays Part# 50-38370001

Hobie® factory replacement hull seal for under the seat pad on Wave.

Hobie Part# 38370001

WAVE HULL SEAL CAP

HOBIE POCKET PROTECTOR KIT

Twist Toggle: Hobie/Prindle
Murrays Part# 25-3320
Stainless steel twist toggle is the standard equipment connection between the shroud anchor pin and shroud adjuster on many catamarans. The twist toggle acts as a universal joint to help eliminate binding. Hobie Cat® item #20210000.

HOBIE/PRINDLE TWIST TOGGLE

FORWARD BREATHABLE TITANIUM TOP

Hobie 20 TRAPEZE WIRE 40504501

H-20 DOUBLE TRAPEZE (4)

Previous 1 … 10 11 12 13 14 … 57 Next

Recently viewed

All Sailing Parts