All Sailing Parts

2213 products

    Everything Nacra, Prindle, Hobie and a few more fun odds and ends.

    2213 products
    Screw 1/4-20 x 5/8 PHMS-P Stainless Steel Murrays Part# 50-8030331 This screw is used on the Hobie wave to secure the eye straps to the inner edge of the crossbars for connecting the tramp pulleys on the classic wave or "other" on the club version.
    SCREW 1/4-20 x 5/8" PHMS-P SS
    Hobie
    Hobie Wave Lower Pintle Murrays Part# 50-38101401 Hobie® factory replacement lower pintle for Wave or Bravo or Getaway Pre-EZ Loc Rudder Systems. Lower pintle assembly for Hobie Wave sailboat. Original Equipment on all Hobie Wave sailboats. Lower pintle should be mounted with four (4) screws. Use Part # 8030171 for boats 2008 and older, or Part # 8030331 for 2009 and newer. Hobie Cat Part # 38101401
    WAVE LOWER PINTLE
    Hobie
    Traveler Sheave H18 - 61890000 Murrays Part# 50-61890000 Hobie factory replacement sheave for Hobie 18 main traveler car. Hobie Part# 61890000
    H-18 TRAVELER SHEAVE
    Hobie
    Hobie 18 main sheet traveler car assembly - Hobie part number 61800001 - Murrays.com
    Traveler Car Assembly H18 Complete - 61800001 - Murrays.com
    H-18 TRAVELER CAR ASSEMBLY
    Hobie
    Out of Stock
    Hobie Tiller End Cap Murrays Part# 50-10400010 Tiller arm end cap for Hobie Cats is a factory replacement part. Use two 6-6 rivets (item #19-5032) for installation.
    HOBIE TILLER END CAP
    Hobie
    Mast Ball H17 Wave Murrays Part# 50-50212301 Hobie factory replacement mast ball for Hobie® 17 and Wave. Ball measures 1-1/2" diameter with a 9/16"-18 threaded hole. This ball can also be glued for use on Trac 16.
    H-17/WAVE MAST BALL
    Hobie
    H16/18 Jib Halyard Block Assembly Murrays Part# 50-20240001 Wire jib halyard block for Hobie 16 or 18 has a sheave diameter of 1-1/2". This is a good upgrade for boats with jib halyard blocks that have a diameter smaller than 1-1/2". Hobie part# 20240001
    Hobie 16 forestay and jib halyard parts chart
    H-16/18 JIB HALYARD BLOCK ASSEMBLY
    Hobie
    Out of Stock
    Hobie Wave Hull Seal Cap Murrays Part# 50-38370001 Hobie® factory replacement hull seal for under the seat pad on Wave. Hobie Part# 38370001
    WAVE HULL SEAL CAP
    Hobie
    H14/16 Gooseneck Shackle Murrays Part# 50-10772020 Hobie factory replacement gooseneck shackle for Hobie 14 and Hobie 16. Uses a 3/16 x 7/8" clevis pin to connect to the main sail tack. Quick release upgrade option is the 3/16 x 3/4" Quick Release Pin, part #18-3M075L Some newer boats and racers replace the downhaul ring with a second Gooseneck Shackle.
    H-14/16 GOOSENECK SHACKLE
    Hobie
    EZ Lock Lower Pintle Murrays Part# 50-90880221 Hobie® factory replacement lower pintle for EZ Loc rudder system. Fits Hobie Bravo, wave and Getaway boats Hobie Part# 90880221
    BRAVO/WAVE/GETAWAY EZ LOC LOWER PINTLE
    Hobie
    Boom Outhaul Bearing H18 Murrays Part# 50-60240000 Boom bearing for Hobie 18 outhaul system
    H-18 BOOM OUTHAUL BEARING
    Murrays Sports
    Screw RHMS #12-24 X 1.25 Stainless Steel Murrays Part# 19-3520 Stainless steel, round head #12-24 x 1.25" machine screw is a replacement screw for Hobie® rudder gudgeon.
    SCREW RHMS #12-24 X 1.25 (SS)
    Misc
    Rudder Pins H14/16 Pair (Nylon) Murrays Part# 001-2271 Nylatron rudder pins are sacrificial for use in the surf (they'll break before your rudder system does) and should be inspected often for wear. Pair of 3/8" x 8" rudder pins with cotter pins for Hobie® 14 or Hobie® 16. Each pair is equivalent to two Hobie Cat® item #10881000 Sold in pairs
    H-14/16 NYLON RUDDER PINS PR
    Murrays Sports
    Jib Clew Pigtail Kit Murrays Part# 001-4015 Easy-connect Dyneema® jib clew pigtail. Speed up tacks and improve sail shape by moving jib clew blocks away from the jib clew. Color may vary from picture. Features: jib Clew Pigtails move jib clew blocks about 14" from jib clew— saves 4 feet of sheeting/unsheeting per tack! "Locked" eye splices— jib blocks cannot slip or un-tie. Save weight (only 2.4oz) and move weight away from jib clew— better sail shape in light wind. Lightweight, easy-connect—
    jib clew pigtail attachment close up
    JIB CLEW PIGTAIL KIT
    Murrays Sports
    Harken 29mm Bullet Block Murrays Part# 28-0082 Medium-size Harken single bullet block with Delrin® ball bearings works well for control line or jib sheeting lines. The low-friction bullet block is compact and lightweight, with fast trim and release under high or low loads.
    HARKEN 29MM BULLET BLOCK
    Harken
    Harken 57mm Ratchet Block - Swivel, Becket, Cam Cleat Murrays Part# 28-2139 Harken 57mm jib block is great for use on almost all Hobie Cat, Nacra and Prindle. Carbo Ratchets allow sailors to hand-hold loaded lines and offer balance between holding power and controlled easing. Specifications Sheave diameter: 2-1/4" Length: 4-15/16" Weight: 9 oz Shackle pin diameter: 3/16" Maximum line diameter: 3/8" Maximum working load: 600 lb. Breaking load: 1500 lb.
    HARKEN 57MM RATCHET BLOCK- SWIVEL, BECKET, CAM CLEAT
    Harken
    HOBIE 14 MAIN HALYARD COMPTIP This main halyard is used to raise the main sail on a Hobie® 14 with CompTip on its mast. Constructed to factory specifications. Compare to Hobie Cat® #10657001.
    H-14 MAIN HALYARD COMPTIP
    Murrays Sports
    Clevis Pin 1/4 X 1-1/8 Murrays Part# 22-9803 Stainless steel clevis pin measures 1/4" diameter x 1-1/8" grip length (shoulder to the split ring hole). Compare to Hobie Part 8020420 and 8020410
    CLEVIS PIN 1/4 X 1-1/8"
    Misc
    Hobie 18 Mastbase Hinge Murrays Part# 50-60650011 Mastbase hinge for the Hobie 18. Factory supplied part for all Hobie 18 masts. Mastbase hinge for the Hobie 18. Does not include hardware for mounting.
    HOBIE 18 MAST BASE HINGE
    Hobie
    GETAWAY TRAMP LACING KIT
    Murrays Sports
    O’Pen Skiff Hiking Strap Murrays Part# 65-53263 Padded booster strap What O’Pen says about the Skiff: For fun, recreation, perfection and racing! The O’pen BIC sailing dinghy is a breath of fresh air for junior sailing. Based on a modern skiff concept, the O’Pen BIC is very fast, very simple, and very FUN to sail! The self-bailing open transom hull is rapid and responsive, with a modern rig that’s rugged and versatile.
    O'PEN SKIFF HIKING STRAP
    Tahe Outdoors
    Shock Cord Dyneema Cover 4mm - White Murrays Part# 39-7391D Robline 4mm Dyneema coated bungee. Robline part number DSC-4W
    DYNEEMA SHOCK CORD 3MM
    Robline
    Quick Release Pin Deluxe 3/16 X 1" Murrays Part# 18-3M100 This convenient pin features a deluxe dished head with a hole for lanyard attachment. No other locking pin is faster operating or safer. The pin is also available with a 1/16" x 7" stainless lanyard with nicropress ovals (see related items). Measurements for this quick pin with cup head are 3/16" diameter x 1" maximum grip length (distance from the shoulder to the locking ball bearings).
    QUICK RELEASE PIN DELUXE 3/16 X 1"
    Misc
    Out of Stock
    H-16 FOAM MAST PLUG
    Hobie
    Quick-Release Pin Deluxe 3/16 X 3/4 with Lanyard Murrays PN 18-3M075L The Quick-Release Pin Deluxe 3/16 X 3/4 with Lanyard features a deluxe dished head and a lanyard to help prevent loss. No other locking pin is faster operating or safer. The pin with cup head includes a stainless lanyard that comes secured on one end with a nicropress oval; the other end is left open so that you can secure with included nicropress oval after attaching the lanyard to your chosen location. This Quick Release Pin featur
    QUICK RELEASE PIN 3/16 X 3/4" WITH LANYARD
    Misc
    Wave Batten Set Murrays Murrays Part# 30-3012 The Murrays Wave Batten Set are the same specs as the OEM version except yellow and with white batten caps. This set includes 5 battens with black OEM luff caps and white TrenTec Leech caps. The bottom three battens are Hobie Main style battens and the top two battens are Hobie Jib style battens. Hobie Part# 38016001
    WAVE MAIN BATTEN SET
    Murrays Sports
    Mast Rotation Control Arm Murrays Part# 25-3040 Stainless mast rotation control arm is strong and smooth! Arm #25-3040 with 1/4″ hole is for all Hobies except for the Hobie® 17, Prindles and Nacras; Arm #25-3041 with 5/16″ hole is for Nacras, Prindles and the Hobie® 17. H17 uses #19-2235 bolt Hobie Part# 61210001
    MAST ROTATION CONTROL ARM
    Murrays Sports
    Ronstan Tie Ball Red 32mm (1 1/4") Diameter Convenient way to terminate control lines while also providing a textured grip for pulling. Recess in one side to contain the stop knot.
    RONSTAN TIE BALL-RED
    Ronstan
    Sale
    H-18 MAINSAIL
    Murrays Sports
    Save $399
    Sale
    MAGIC MARINE SEAT HARNESS
    Magic Marine
    Save $80
    Out of Stock
    Rivet Solid A 4-6 (1/8 X 3/8) Murrays Part# 19-5005 Solid aluminum 1/8" x 3/8" rivet is designed to be set with a hammer.
    RIVET SOLID A 4-6 (1/8x3/8")
    Misc
    Cat Trax Delrin Roller Bearing Set Murrays Part# 13-1401-5 Set of 20 roller bushings for one Cat Trax wheel. Tiger Trax require 2 sets per wheel. Sold in set of 20
    CAT TRAX DELRIN ROLLER BEARING SET (20)
    Cat Trax
    The Murrays Hobie 18 line package contains all the lines on a Hobie 18. We use Mainly Robline Neptune 500 for the sheets and Pelican VLS, Very Low Stretch, for the control lines. Main Sheet Jib Sheet Daggerboard Handles Outhaul Downhaul Mast Rotation Main Halyard Trampoline Lacing Lines Trapeze Adjustment Line Batten Ties Roller Furline line Jib Halyard Jib Luff Tension Line
    H-18 LINE PACKAGE
    Murrays Sports
    Back by popular demand the Murrays Race Half Harness is perfect for recreational sailors and racers alike looking for a light weight, comfortable half harness. The Murrays Half Harness is a seat harness designed specifically with the Catamaran sailor in mind. The Murrays Half harness features internal battens to provide an amazing amount of back support with a low profile harness. This Butt Bucket style harness is compatible with the Magic Marine quick release hook system or the Murrays Ball Lock trapeze
    MURRAYS RACE HALF HARNESS-NO SPREADER BAR
    Murrays Sports
    Snap Shackle with Swivel Eye Murrays Part# 22-4521 2-3/4" long stainless steel snap shackle with swivel eye has 1/2" diameter eye. SWL 1000 lbs. Weighs 2.4 oz.
    SNAP SHACKLE WITH SWIVEL EYE
    Misc
    Alpha SSR Light Racing Sheet 8mm
    5/16" SSR LIGHT RACING SHEET 8MM
    AlphaRope
    Hull Cradle: Bow Murrays Part# 13-7030
    HULL CRADLE: BOW
    Murrays Sports
    Quick-Release Pin Deluxe 1/4 X 3/4 with Lanyard Murrays Part# 18-4M075L This aircraft quality quick-release pin features a deluxe dished head. No other locking pin is faster operating or safer. Stainless 1/16" x 7" lanyard stainless lanyard is secured on one end with a nicropress oval; the other end is left open so that you can secure with included nicropress oval after attaching the lanyard to your chosen location. Measurements are 1/4" diameter x 3/4" maximum grip length (distance from the shoulder to
    QUICK RELEASE PIN 1/4 X 3/4" WITH LANYARD
    Misc
    Quick-Release Pin Deluxe 1/4 X 3/4 Murrays Part# 18-4M075 This economical pin features a spring-loaded ball that exerts sufficient pressure to help avoid accidental release. The pin is also available with a lanyard to help prevent loss of pin (see related items below). Measurements are 1/4" diameter x 3/4" maximum grip length (distance from the shoulder to the locking ball bearings). Compare to Hobie Cat® #20302.
    QUICK RELEASE DELUXE PIN 1/4 X 3/4"
    Misc
    Out of Stock
    Mast Float Attachment Kit: H14/16 Murrays Part# 007-30116 This attachment kit for Hobie® 14 or 16 comes with Hobie® Mama and Baby Bobs, but is also offered separately here.
    H-14/16 MAST FLOAT ATTACHMENT KIT
    Hobie
    Recently viewed