All Sailing Parts

2214 products

    Everything Nacra, Prindle, Hobie and a few more fun odds and ends.

    2214 products
    MAGIC MARINE REPLACEMENT SPREADER BAR QUICK REALEASE HOOK
    MAGIC MARINE REPLACEMENT QUICK RELEASE HOOK
    Magic Marine
    MURRAYS H-16 HALYARD GRIP KIT The Murrays H16 Halyard grip kit is a mast hook that hold the jib halyard off center on the mast so that the jib battens don't hang up on the jib halyard when tacking.  Mostly used on the Hobie 16. Compare to Hobie part number 114
    MURRAYS H-16 HALYARD GRIP KIT
    Murrays Sports
    Sale
    Forward WIP Sailing Glove The Forward WIP Sailing Glove has been professionally designed for sailing and windsurfing. They provide the user a snug fit, maximum protection, improved dexterity, comfort and excellent durability. This model has reinforced panels on the back of the hand to protect from impacts during sailing maneuvers. Features: Excellent durability Snug fit Improved dexterity Water Shedding - holds less water Seamless wrap around Amara® reinforcement on fingers combatting c
    FORWARD WIP SAILING GLOVE
    Forward Wip
    Save $9.95
    H-18 Surefoot EVA Deck Grip Kit - Peel and Stick The Hobie 18 Surefoot EVA Deck Grip Kit features 3m peel and stick backing on cut-diamond-textured EVA foam. Ideal rail and or deck grip on all dinghies and catamarans. EVA traction pads offer grip, padding and a long life span.  EVA is a lightweight foam doesn't absorb water the way carpet does, so there is minimal weight when it gets wet and it dries quickly! Hobie 18 kit includes four 3" x 40" strips and four 3" x 20" strips - covers the side rails
    H-18 SUREFOOT EVA Deck PEEL AND STICK GRIP KIT
    Murrays Sports
    Ronstan Halyard Shackle, 1/4" Pin Murrays Part# 21-1033 The Ronstan Halyard Shackle with Twist Pin's main advantage is that you cant loose any of it once its attached. The top pin holds it on and the bottom pin dose not come out. Never loose your shackle pins again! The 1/4" Halyard Shackle with Twist Pin is used in the following Murrays Products: 02-4383-50 N-5.5SL Jib Halyard w/Shackle
    RONSTAN HALYARD SHACKLE, 1/4" PIN
    Ronstan
    Harken Standard Cam Cleat Spring Murrays Part# 28-0056 The Harken Cam-Matic Replacement Spring for 150, 365 for cleats #28-0150 and #28-0365.  Harken Part# MS-006
    HARKEN STANDARD CAM CLEAT SPRING
    Harken
    H16 Aussie Pigtail Assy Replacement 5/32" pigtail for Aussie jib halyard kit for Hobie® 16 (#01-3302)
    H-16 AUSSIE PIGTAIL ASSY
    Murrays Sports
    Spare Parts Kit: H18 Murrays Part# 001-4221 Why lose a weekend of sailing due to a missing part? Stored in a 5" x 12" zippered pouch, this kit for Hobie® 18 contains the most frequently lost and needed items. Includes shackle tool, two drain plugs with gaskets, aluminum rudder pins, clevis pins and rings kit, 3/16" bow shackle, 1/4" bow shackle and batten tie strings. Pouch comes in assorted colors. Compare to Hobie Cat® #30307.
    H-18 SPARE PARTS KIT:
    Murrays Sports
    H14/16 Rudder Return Hand Shock Cord Murrays Part# 001-2240 Two 32" shock cords with balls keep your Hobie® 14 or 16 rudders down when the cams don't! Order Kisme Kleets #05-1010 separately, if needed.
    H-14/16 RUDDER RETURN HAND SHOCK CORD
    Murrays Sports
    Out of Stock
    Headboard Replacement Kit Murrays Part# 001-1014 Headboard Replacement Kit includes one pair of anodized aluminum plates with rivets to be set with a hammer. Plates measure 5" high x 4" wide x 6-1/4 diagonal. Replacement rivets are available separately (#19-5006).
    HEADBOARD REPLACEMENT KIT
    Murrays Sports
    Can't Hurt Trap Rings Murrays Part# 001-0123 Can't Hurt Trap Rings are a light and flexible alternative to "hard" stainless steel dogbones. Black high pressure nylon tubing covers 1/8" (1x19) stainless wire. Compare to Hobie Cat® #2003. Sold in pairs
    CAN'T HURT TRAP RINGS (PR)
    Murrays Sports
    Out of Stock
    Hobie Wave Lower Pintle Bushing Murrays Part# 50-38360001 This is the lower bushing for the original Wave or Getaway rudder castings. This fits into the aluminum rudder castings PRE- EZLoc rudder assemblies. This also fits Getaway and Bravo Pre-Ez Loc assemblies. Hobie Part# 38360001
    HOBIE WAVE LOWER PINTLE BUSHING
    Hobie
    Roller Furling Drum Forestay Adjuster Murrays Part# 50-60830000 Hobie® factory replacement 13-hole adjuster for roller furler. Hobie Part# 60830000
    ROLLER FURLING DRUM FORESTAY ADJUSTER
    Hobie
    H16/18/Getaway Mast Tang Murrays Part# 50-20690000 Hobie® factory replacement mast tang for Hobie® 16, 18, Getaway and the 1995 and newer Hobie® 17. Use twelve 6-4 rivets (#19-5031) and twelve casings (#19-5020) for installation. Also known as a mast hound
    H-16/18/GETAWAY MAST TANG
    Hobie
    Clevis Pin 1/4 X 3/4" Murrays Part# 56-4012 The Clevis Pin 1/4 X 3/4" is used on Prindle rudders, Nacra mast head sheave and as Nacra/Prindle shroud pin. Prindle Part# 4012
    CLEVIS PIN 1/4 X 3/4"
    NACRA
    Rudder Pins H17, H18, Wave, Getaway (Aluminum) Murrays Part# 001-4274 Aluminum rudder pins for the Hobie 17, 18, Wave and Getaway.  Aluminum 3/8″ x 9-1/4″ rudder pins, cotter pins are included.  Sold in pairs Compare to Hobie Cat® #60880001
    H-17/18/WAVE AND GETAWAY ALUMINUM RUDDER PINS
    Murrays Sports
    Rivet MSP 6-10 3/16 X 5/8" PH Murrays Part# 19-5023 Rounded pan head 3/16" x 5/8" Monel rivet. Compare to Hobie Cat® Part# 8010121
    RIVET MSP 6-10 3/16 X 5/8" PH
    Hobie
    H14/16 Main Halyard Hook Murrays Part# 25-3330 The main halyard hook is used on the Hobie 14, Hobie 16, Wave, Getaway, Prindles, Sol Cats and Nacras that use a wire halyard. Use two 6-4 rivets (#19-5031) and two casings (#19-5020) for installation. Hobie part# 10680000 Nacra part number 6812
    H-14/16 MAIN HALYARD HOOK
    Hobie
    Harken 1/4" Torlon Ball Bearing-21 Balls Murrays Part# 28-0177 1/4" Torlon replacement ball bearings fit Harken 158, 159, 172, 210, 212, 214, 215, 249, 440 and 441. A bearing loader, #28-HSB8 (sold separately), is required for installation. Sold in packages of 21
    HARKEN 1/4" TORLON BALL BEARING (21)
    Harken
    Clew Kit 5-Hole (H16 Jib) Murrays Part# 001-1012 Clew kit for Hobie® 16 jib includes one pair of anodized aluminum plates with rivets to be set with a hammer. Each plate has five holes and measures 8" maximum length by 1-1/2" wide. Replacement rivets are available separately (#19-5006). This product replaces discontinued item #50-22240000.
    H-16 5 HOLE JIB CLEW KIT
    Murrays Sports
    Clamcleat (Aluminum) Murrays Part# 27-0702 Replace old, worn-out outhaul and downhaul Clamcleats®. Aluminum cleats are stronger than nylon and have increased wear resistance. Easy to mount. Line capacity is 1/8"-1/4".  2 5/8" hole spacing. This cleat is a substitution for Hobie Part# 61070000
    CLAMCLEAT (ALUMINUM)
    Clamcleat
    Out of Stock
    Nacra Tiller Tie Bar End Tendon Assembly Murrays Part# 56-31567-2 The rubber tiller tiebar connection including string. This part connects the tillerarm with the tiller crossbar.
    NACRA TILLER TIE BAR END TENDON ASSEMBLY
    NACRA
    Sale
    FORWARD BREATHABLE TITANIUM TOP
    Forward Wip
    Save $40.95
    Out of Stock
    Murrays Hobie 18 Jib sail
    H-18 JIB SAIL
    Murrays Sports
    Save $115
    Ronstan Race Boots are Ronstan's most heavy duty sailing boot. They have a thick sole that makes them very comfortable and protects your feet from anything you may step on. The Race Boot has thick neoprene and more layered protection on the toe area and the top of the boot which makes them nice and warm and also adds protection and longevity. Great for sailors who plan on getting wet but don't want to sacrifice comfort or safety.
    RONSTAN RACE BOOT
    Ronstan
    PowerStick Telescoping Carbon Tiller Extension 64-115" The PowerStick Telescoping Carbon Tiller Extension is a strong, ultra lightweight, adjustable length tiller. Ideal for use on all Hobie, Prindle and Nacra catamarans, as well as A-Cats, Corsair and Farrier Trimarans. The Powerstick locks by twisting the grip either direction. It is possible to twist the grip 360 past the locking point which is great if you forget which direction you locked it in. The locking action is smooth and grips
    POWERSTICK TELESCOPING CARBON TILLER EXTENTION 62-115" - UNIVERSAL TENDON
    Murrays Sports
    Out of Stock
    Hobie 18/21Sport Edition Boom Cleat Clamp Murrays Part# 50-61711000M  The Hobie boom clamp mounts the clamcleat (#27-0702) on to a Hobie 18 boom. Two boom clamps are required to mount one cleat. This is a Murrays product, made with an Anodized aluminum body and a 316 stainless steal screw insert.  Made in California, USA. Compare to Hobie part# 61711000 discontinued by Hobie
    H-18/21SE BOOM CLEAT CLAMP
    Murrays Sports
    PRINDLE RUDDER REFRESH KIT
    Murrays Sports
    Harken 29mm Clew Block Murrays Part# 28-0371 Harken's 29mm Carbo block assembly is designed to be sewn onto the clew of a sail. It can be used to replace the jib clew block on Hobie® 14 and 16. Specifications: 330 lb. SWL; 1000 lb. breaking strength; 5/16" maximum line diameter.  On Hobie® 14 and 16, attach with #21-1032 twist pin halyard shackle. Harken Part# 371
    HARKEN 29MM CLEW BLOCK
    Harken
    Harken Shackle Stamped 3/16" Murrays Part# 28-0072 Harken's stainless stamped D-shackle has 3/16" diameter pin. For Harken 2.25" blocks
    HARKEN SHACKLE STAMPED 3/16"
    Harken
    Ronstan Curved Surface Base/Riser for Medium Cam Cleats Murrays Part# 21-5016 Ronstan riser/curved surface adapter fits medium C-Cleat and T-Cleat. Use on round surface such as mast or crossbar. Ronstan Part# RF5416
    RONSTAN CURVED SURFACE BASE/RISER FOR MEDIUM CAM CLEATS
    Ronstan
    Ronstan Stainless Steel D Shackle, 1/4" Murrays Part# 21-0617 UDL BL - The “Uniformly Distributed Load” breaking load of the shackle; the load is applied across the full span of the shackle pin. PL BL - The “Point Load” breaking load of the shackle; the load is only applied at the center or one side of the shackle pin. Ronstan solid stainless steel shackle has 1/4" pin diameter. Having a spare on hand may mean the difference between sailing or not!
    RONSTAN 1/4" D SHACKLE
    Ronstan
    Batten Cap Leech Adjustable H16 Jib Each Murrays Part# 012-3004-1 No more knots at the trailing edge. Adjust Hobie® 16 jib sail shape in seconds without tying and untying knots. Release tension to prolong sail shape and life. Individual cap. Sold Individually
    ADJUSTABLE LEECH JIB BATTEN CAP (EA)
    Tren-Tec
    PRINDLE JIB HALYARD WITH SISTER CLIPS
    Murrays Sports
    Hobie 16 turquoise mesh trampoline Hobie 20970058
    H-16 3-PIECE TEFLON TRAMPOLINE-BLUE
    Murrays Sports
    GETAWAY WING PIN/EZ LOC RUDDER LANYARD Replacement lanyard for Hobie Getaway Wing Pins and EZ Loc rudder up pin kit. Hobie part number 50314001
    HOBIE GETAWAY WING LEG LANYARD
    Hobie
    H20 Upper Rudder Slack Bushing Murrays Part# 50-40340001 This is the upper bushing for the Hobie Miracle 20 rudder casting. This uses the 5/16" stock rudder pins. Hobie Part# 40340001
    H-20 UPPER RUDDER SLACK BUSHING
    Hobie
    H20 Lower Rudder Slack Bushing Murrays Part# 50-40360001 This is the lower bushing for the Hobie Miracle 20 rudder casting. This uses the 5/16" stock rudder pins. Compare to Hobie Part# 40360001
    H-20 LOWER RUDDER SLACK BUSHING
    Hobie
    Prindle 15/16/18 Owner Manual Murrays Part# 56-9050 This is a copy of the original factory owner's manual for Prindle 15, 16 and 18 catamarans built by Performance Sports.
    PRINDLE 15/16/18 OWNER MANUAL
    Murrays Sports
    Out of Stock
    HOBIE ROLLER FURLING DRUM 1" NYLINER
    Hobie
    Recently viewed