Murrays.com Hobie shroud, forestay, halyard, mast bearing

Murrays

797 products

    Hobie, Nacra and Prindle rigging: shrouds, halyards, bridles, forestays and small parts like mast bearings, trapeze handles, rudder cam kits, rudder pins, righting lines and more.

     

    797 products
    HOBIE 14 MAIN HALYARD COMPTIP This main halyard is used to raise the main sail on a Hobie® 14 with CompTip on its mast. Constructed to factory specifications. Compare to Hobie Cat® #10657001.
    H-14 MAIN HALYARD COMPTIP
    Murrays Sports
    Out of Stock
    Jib Traveler Control Kit: Fixed Cam Murrays Part# 001-3112 A jib traveler system allows remote adjustment of the jib cars. This dramatically increases downwind speed and may help avoid a pitchpole caused by your crew moving leeward to make an adjustment by hand.
    JIB TRAVELER CONTROL KIT: FIXED CAM
    Murrays Sports
    PRINDLE JIB HALYARD WITH SISTER CLIPS
    Murrays Sports
    The Murrays Hobie 18 line package contains all the lines on a Hobie 18. We use Mainly Robline Neptune 500 for the sheets and Pelican VLS, Very Low Stretch, for the control lines. Main Sheet Jib Sheet Daggerboard Handles Outhaul Downhaul Mast Rotation Main Halyard Trampoline Lacing Lines Trapeze Adjustment Line Batten Ties Roller Furline line Jib Halyard Jib Luff Tension Line
    H-18 LINE PACKAGE
    Murrays Sports
    H-18 PERFORMANCE MANUAL
    Murrays Sports
    Mast Rotation Control Arm Murrays Part# 25-3040 Stainless mast rotation control arm is strong and smooth! Arm #25-3040 with 1/4″ hole is for all Hobies except for the Hobie® 17, Prindles and Nacras; Arm #25-3041 with 5/16″ hole is for Nacras, Prindles and the Hobie® 17. H17 uses #19-2235 bolt Hobie Part# 61210001
    MAST ROTATION CONTROL ARM
    Murrays Sports
    H-16 JIB CLEW BLOCK KIT
    Murrays Sports
    Hobie 16 Main Halyard Non-Comptip is a wire halyard for the all-aluminum mast (non Comp-Tip) Hobie 16 and is used to raise the main sail. Constructed to factory specifications, and includes a 2nd stopper as a reef point stopper. This is the standard halyard for Hobie 16's with an all aluminum mast which were standard before 1986. Hobie part number 20651011
    H16 MAIN HALYARD WITH LINE (NON-COMPTIP)
    Murrays Sports
    HOBIE 14 MAIN HALYARD W/SHACKLE Main halyard with shackle for Hobie 14 with all-aluminum mast (no CompTip) is constructed to factory specifications. A main halyard is used to raise the main sail. Compare to Hobie Cat® #10651001
    Main halyard with shackle for Hobie 14 with all-aluminum mast (no CompTip) is constructed to factory specifications. A main halyard is used to raise the main sail. Compare to Hobie Cat® #10651001
    H-14 MAIN HALYARD WITH SHACKLE
    Murrays Sports
    H14/16 Rudder Return Hand Shock Cord Murrays Part# 001-2240 Two 32" shock cords with balls keep your Hobie® 14 or 16 rudders down when the cams don't! Order Kisme Kleets #05-1010 separately, if needed.
    H-14/16 RUDDER RETURN HAND SHOCK CORD
    Murrays Sports
    Rudder Pins H17, H18, Wave, Getaway (Aluminum) Murrays Part# 001-4274 Aluminum rudder pins for the Hobie 17, 18, Wave and Getaway.  Aluminum 3/8″ x 9-1/4″ rudder pins, cotter pins are included.  Sold in pairs Compare to Hobie Cat® #60880001
    H-17/18/WAVE AND GETAWAY ALUMINUM RUDDER PINS
    Murrays Sports
    H18 Main Traveler Ball Bearing Set Murrays Part# 50-61850002' Hobie 18 Main Traveler Ball Bearing Set includes two traveler ball bearings (#50-61850000), plus one 2" cotter pin (#50-8060121).
    Hobie 18 main traveler car parts list - 6180001, 8040301, 61870000, 61880000, 60190000, 8050311, 61842000, 8060121, 61810000, 61830000, 61852000, 8020431
    H-18 MAIN TRAVELER BALL BEARING SET
    Murrays Sports
    Hobie 18/21Sport Edition Boom Cleat Clamp Murrays Part# 50-61711000M  The Hobie boom clamp mounts the clamcleat (#27-0702) on to a Hobie 18 boom. Two boom clamps are required to mount one cleat. This is a Murrays product, made with an Anodized aluminum body and a 316 stainless steal screw insert.  Made in California, USA. Compare to Hobie part# 61711000 discontinued by Hobie
    H-18/21SE BOOM CLEAT CLAMP
    Murrays Sports
    Wave Batten Set Murrays Murrays Part# 30-3012 The Murrays Wave Batten Set are the same specs as the OEM version except yellow and with white batten caps. This set includes 5 battens with black OEM luff caps and white TrenTec Leech caps. The bottom three battens are Hobie Main style battens and the top two battens are Hobie Jib style battens. Hobie Part# 38016001
    WAVE MAIN BATTEN SET
    Murrays Sports
    PowerStick Telescoping Carbon Tiller Extension 64-115" The PowerStick Telescoping Carbon Tiller Extension is a strong, ultra lightweight, adjustable length tiller. Ideal for use on all Hobie, Prindle and Nacra catamarans, as well as A-Cats, Corsair and Farrier Trimarans. The Powerstick locks by twisting the grip either direction. It is possible to twist the grip 360 past the locking point which is great if you forget which direction you locked it in. The locking action is smooth and grips
    POWERSTICK TELESCOPING CARBON TILLER EXTENTION 62-115" - UNIVERSAL TENDON
    Murrays Sports
    GETAWAY TRAMP LACING KIT
    Murrays Sports
    Clew Kit 5-Hole (H16 Jib) Murrays Part# 001-1012 Clew kit for Hobie® 16 jib includes one pair of anodized aluminum plates with rivets to be set with a hammer. Each plate has five holes and measures 8" maximum length by 1-1/2" wide. Replacement rivets are available separately (#19-5006). This product replaces discontinued item #50-22240000.
    H-16 5 HOLE JIB CLEW KIT
    Murrays Sports
    Out of Stock
    Headboard Replacement Kit Murrays Part# 001-1014 Headboard Replacement Kit includes one pair of anodized aluminum plates with rivets to be set with a hammer. Plates measure 5" high x 4" wide x 6-1/4 diagonal. Replacement rivets are available separately (#19-5006).
    HEADBOARD REPLACEMENT KIT
    Murrays Sports
    Replaceable Aluminum Trap Handle Murrays Part# 007-2010 Foam-covered aluminum handle is easily installed onto existing trapeze wire. Carry a spare as a temporary repair, then replace the wire at your convenience. Each. Hobie Cat® Part# 2010
    REPLACABLE ALUMINUM TRAP HANDLE
    Murrays Sports
    Rudder Pins H14/16 Pair (Nylon) Murrays Part# 001-2271 Nylatron rudder pins are sacrificial for use in the surf (they'll break before your rudder system does) and should be inspected often for wear. Pair of 3/8" x 8" rudder pins with cotter pins for Hobie® 14 or Hobie® 16. Each pair is equivalent to two Hobie Cat® item #10881000 Sold in pairs
    H-14/16 NYLON RUDDER PINS PR
    Murrays Sports
    Rudder Pin Nacra, Prindle and H21 (Aluminum) Murrays Part# 001-5272 Aluminum rudder pins for Nacra, Prindle and Hobie® 21 measure 3/8" x 10-1/4" end-to-end, with hole at each end. Cotter pins are included. Sold in pairs
    NACRA/PRINDLE AND H21 ALUMINIUM RUDDER PIN
    Murrays Sports
    Prindle 15/16/18 Owner Manual Murrays Part# 56-9050 This is a copy of the original factory owner's manual for Prindle 15, 16 and 18 catamarans built by Performance Sports.
    PRINDLE 15/16/18 OWNER MANUAL
    Murrays Sports
    H-16 JIB BATTEN 67" 67" Murrays jib batten with a trentec batten cap. Batten #1 in a Hobie 16 jib batten set - 20400001
    H-16 JIB FIBERGLASS BATTEN 67"
    Murrays Sports
    Hobie 16 turquoise mesh trampoline Hobie 20970058
    H-16 3-PIECE TEFLON TRAMPOLINE-BLUE
    Murrays Sports
    Hobie 18 rigging set: Forestay, upper forestay, shrouds, bridles, trapeze wires
    H-18 RIGGING KIT
    Murrays Sports
    POWERSTICK TELESCOPING CARBON TILLER EXTENSION 68-130"
    Murrays Sports
    The Tramp Line Kit: When lacing your trampoline, line offers a longer-lasting option over shock cord and is the better choice for sailors who prefer a very tight tramp. As the line stretches slightly over time, sailors can re-tension the tramp lacing to their liking. The line in this kit is black, abrasion-resistant, 8-strand low stretch. #001-2246 for Prindle 15, 16, 18 or Escape includes two 1/8" x 11' lengths and one 3/16" x 22'. #001-2248 for Prindle 18.2 or 19 includes two 19-foot lengths of
    PRINDLE TRAMP LINE KIT
    Murrays Sports
    Hobie 20 TRAPEZE WIRE 40504501
    H-20 DOUBLE TRAPEZE (4)
    Murrays Sports
    Hobie Wave 4:1 Main Sheet System Murrays Part# 28-041 The Murrays Hobie low profile 4:1 main sheet system for the Hobie Wave. By Adding a fairlead to the back side of the cleat on the base block we have made a low profile main sheet system that no longer needs a becket on the base block. We have also replaced the upper fiddle block with a double block which makes it even more compact. The result is a lightweight, low profile and very strong, made with 40mm Harken Carbo AirBlocks.
    Murrays low profile Hobie Wave main sheet system
    WAVE 4:1 MAIN SHEET SYSTEM
    Murrays Sports
    6815 Prindle mast hinge with pins. Used to raise the mast on the Prindle 15, 16, 18 18.2 and 19.
    6815 Prindle mast hinge with pins. Used on the Prindle 15, 16, 18 18.2 and 19.
    PRINDLE MAST HINGE KIT
    Murrays Sports
    Cat Righter Uphaul: Cam-Clt 4:1 Murrays Part# 001-3273 This is the 4:1 block and tackle system only from Murrays' popular Cat Righting Big Bag System (#01-3280). Use with a righting bag to aid in righting a capsized catamaran.
    CAT RIGHTER UPHAUL: CAM-CLEAT 4:1
    Murrays Sports
    Out of Stock
    Hull Cradle: Bow Murrays Part# 13-7030
    HULL CRADLE: BOW
    Murrays Sports
    Murray's Retro Tee Show off your Murrays pride with this Retro Murrays cotton T-Shirt. We brought this design back from the archives to enjoy for every generation. These shirts are super comfy cotton blend and a must-have for any regatta. Don't be caught without one!
    MURRAYS RETRO TEE
    Murrays Sports
    Boom Outhaul Bearing H18 Murrays Part# 50-60240000 Boom bearing for Hobie 18 outhaul system
    H-18 BOOM OUTHAUL BEARING
    Murrays Sports
    Powerstick Yoke Murrays Part# 001-134-4 Replacement Powerstick tiller yoke
    POWERSTICK YOKE
    Murrays Sports
    M6 x 25mm Titanium Hydrofoil Screws Murrays Part# 55-0025T The M6 x 25mm Titanium Hydrofoil Screws are stronger and more corrosion resistant than stainless steal foil hardware. Compatible with all M6 foil track inserts. The 25mm length is used for both board to foil connection as well as foil assembly. Commonly used with F-One, Naish, Airush, Takuma, Axis, Sab foil, Armstrong and more. Titanium foil hardware does not require greasing or regular checking. Titanium does not corrode or seize
    M6 x 25mm Titanium Hydrofoil Screws Murrays Part# 55-0025T The M6 x 25mm Titanium Hydrofoil Screws are stronger and more corrosion resistant than stainless steal foil hardware. Compatible with all M6 foil track inserts. The 25mm length is used for both board to foil connection as well as foil assembly. Commonly used with F-One, Naish, Airush, Takuma, Axis, Sab foil, Armstrong and more. Titanium foil hardware does not require greasing or regular checking. Titanium does not corrode or seize
    M6x25MM TITANIUM HYDROFOIL SCREWS
    Murrays Sports
    Out of Stock
    Murrays Hobie 18 Jib sail
    H-18 JIB SAIL
    Murrays Sports
    Save $115
    Out of Stock
    H14/16/17/18 Line Catcher-Black Murrays Part# 30-3530 The Hobie Trampoline Line Catcher is a strip of mesh trampoline that fits in between your center trampoline lacing to prevent lines and other items from falling through the lacing. Works on all 3 piece Hobie 14, 16 and 18 trampolines.
    H-14/16/17/18 LINE CATCHER-BLACK
    Murrays Sports
    Sale
    H-18 MAINSAIL
    Murrays Sports
    Save $440
    Sale
    Hobie 16 jib sail, blue
    +1
    H-16 JIB SAIL
    Murrays Sports
    Save $70
    Recently viewed