Murrays.com Hobie shroud, forestay, halyard, mast bearing

Murrays

764 products

    Hobie, Nacra and Prindle rigging: shrouds, halyards, bridles, forestays and small parts like mast bearings, trapeze handles, rudder cam kits, rudder pins, righting lines and more.

     

    764 products
    Shock Cord Tramp Lacing Kit H14/16/18 Murrays Part# 001-2241 Shock Cord Tramp Lacing Kit H14, 16, 18 is for the recreational sailor who is lacing a trampoline. Shock Cord is usually the better choice over line tramp lacing. Just "set it and forget it" because shock cord maintains the tension you set when lacing your tramp. Shock cord also reduces tramp and grommet wear because the load is spread over multiple grommets, especially when walking on the tramp. The latest technology shock cord used in our kits
    H-14/16/18 SHOCK CORD TRAMP LACING KIT
    Murrays Sports
    Rudder Pin Nacra, Prindle and H21 Stainless Steel Murrays Part# 001-5273 Long-wearing, weight-saving, hollow stainless rudder pins with strong, .065" wall provide reduced wear and the best long-term fit. These rudder pins measure 3/8" x 10-1/4" end-to-end with a hole at each end. They will fit Nacra, Prindle and Hobie® 21. Cotter pins are included. These pins are a replacement for Hobie® factory item #40880011 (sold individually). Sold in pairs
    NACRA/PRINDLE AND H21 SS RUDDER PIN
    Murrays Sports
    5"X12" Zip Pouch-Assorted Colors Murrays Part# 31-1401 The Murrays Zip Pouch 5"X12" is constructed of rugged, water-resistant material with plastic hooks at each end to attach to the center or aft tramp lacing. The pouch provides handy storage for replacement parts, keys, and safety gear. Assorted colors. We have this pouch made for us right here in the U.S.A. Compare to Hobie Cat® stow bag #72000B and 72005B
    5"X12" ZIP POUCH-ASSORTED COLORS
    Murrays Sports
    H14 Shroud 1/8" One shroud (sidestay) for Hobie® 14 constructed of 1/8" wire to factory specifications. Connect at top with #21-0635 1/4" bow shackle; connect to stay adjuster with #22-9802 clevis pin. Use this page to order product numbers: 02-0104-01 White 02-0104-02 Black Hobie Cat® Part# 10792100
    H-14 SHROUD 1/8" WIRE
    Murrays Sports
    JIB CLEW BLOCK KIT
    Murrays Sports
    Tiller Connection Kit Murrays Part# 001-2061 The Murrays Tiller Connection Kit assures consistent rudder alignment through the full rudder sweep. Spring-loaded half balls and contoured spacers take the slop out of the tiller-to-crossbar connection on Hobie Cats. Racing class legal. Each kit contains 2 connectors to join the tiller crossbar to the tiller arms. Compare to Hobie Cat® #3052. Applications:; Hobie 14, 16, 17, 18, 18SX
    PLASTIC CONTOURED SPACER
    Murrays Sports
    H14/16/17/18 Gudgeon Lower Murrays Part# 25-3352 The latest, strongest rudder gudgeon design with welded sleeve bushings provides large, smooth bearing surfaces between rudder pins and gudgeons. Replace flared gudgeons with their sharp edges and point loading that can cause early rudder pin failure. For Hobie® 14, 16 and 17, order separate upper and lower gudgeons. For all other Hobie® cats with new-style castings, post 1986, order 4 for a complete set . Replacement for Hobie Part# 50101401
    H-14/16/17/18 LOWER GUDGEON
    Murrays Sports
    Getaway Forestay 5/32" Black Wire Murrays Part# 002-0945-12 The Hobie Getaway forestay is made with 5/32" black vinyl coated type 316 stainless steel wire and fittings. This forestay is compatible with all generations of Hobie Getaways. Compare to Hobie Cat Part# 37810001
    GETAWAY FORESTAY 5/32" BLACK WIRE
    Murrays Sports
    The Murrays Prindle 16 main halyard is made to factory specs. We use 316 stainless steal bare wire and thimbles. It also has a Ronstan Halyard Shackle with a captive pin so that it will not fall out when loosened. Prindle part number 9026
    PRINDLE 16 MAIN HALYARD WITH SHACKLE
    Murrays Sports
    H-16 JIB BATTEN 44" 44" Murrays jib batten with a trentec batten cap.   Batten #3 in a Hobie jib batten set - 20400001 It is also use for the batten #8 on a Hobie 16 main sail batten set - 21000001
    H-16 JIB FIBERGLASS BATTEN 44"
    Murrays Sports
    Traveler Ball Bearing H18 Murrays Part# 50-61850000 The Traveler Ball Bearing H18 is the stock Hobie 18 Main sheet traveler car ball beaing. This ball can be used in place of cylinder bearing #50-61860000 to bring the traveler back to what came stock on the Hobie 18. The difference between the traveler ball and the cylinder is that the balls allow the car to move faster but they wear down quicker. Hobie has stopped making the Hobie 18 traveler balls, but Murrays found their source and made more!
    Hobie 18 main traveler car parts list - 6180001, 8040301, 61870000, 61880000, 60190000, 8050311, 61842000, 8060121, 61810000, 61830000, 61852000, 8020431
    H-18 TRAVELER BALL BEARING
    Murrays Sports
    Rudder Pull Up/Down Kit Prindle Murrays Part# 001-1180 Replacement handles and ropes to pull your rudders up and down on all Prindle models.
    PRINDLE RUDDER PULL UP/ DOWN KIT
    Murrays Sports
    H14 Bridle 1/8" One bridle for Hobie® 14 constructed of 1/8" 1x19 wire to factory specifications. Compare to Hobie Cat® #10822101. This is for Hobie 14s without jibs. Murrays PN 002-0114-01 002-0114-02
    H-14 Bridle 1/8" Single bridle for Hobie 14 constructed of 1/8" 1x19 wire to factory specifications.  This is for Hobie 14s without jibs. Use this page to order product numbers: 02-0114-01 White 02-0114-02 Black Compare to Hobie Cat® #10822101
    H-14 BRIDLE 1/8" WIRE
    Murrays Sports
    Hobie 18 TRAPEZE WIRE - WHITE 1473W, BLACK 1473B
    H-18/21SC DOUBLE TRAPEZE (4)
    Murrays Sports
    Hobie Getaway Bridle 5/32" Black Wire Murrays Part# 002-0915-22 One black bridle for Hobie® Getaway is constructed to factory specifications. We recommend ordering two to ensure equal lengths. Compare to Hobie Part# 37822011
    Getaway Bridle 5/32" Black Wire Murrays Part# 002-0915-22 One black bridle for Hobie® Getaway is constructed to factory specifications. We recommend ordering two to ensure equal lengths. Compare to Hobie Cat® Part# 37822011
    GETAWAY BRIDLE 5/32" BLACK WIRE
    Murrays Sports
    Prindle Spare Parts Kit Murrays Part# 001-5221 Why lose a weekend of sailing due to a missing part? Stored in a 5" x 12" zippered pouch, the Murrays Spare Parts Kit contains the most frequently lost and needed items. Includes shackle tool, two drain plugs with gaskets, aluminum rudder pins, clevis pins and rings kit, 3/16" bow shackle, 1/4" bow shackle and batten tie line. Pouch comes in assorted colors as available.
    PRINDLE SPARE PARTS KIT
    Murrays Sports
    Halyard 5"X 9" Zip Pouch-Assorted Colors Murrays Part# 31-1400 The Murrays 5" x 9" zippered halyard pouch is constructed of rugged, water-resistant material with plastic hooks at each end to attach to the tramp lacing. The off-center zipper is designed for easy stuffing of your boat's halyard. The pouch is also handy for storing replacement parts, keys, and safety gear. Assorted colors. We have this pouch made for us right here in the U.S.A. Compare to Hobie Cat® stow bag #72000B and 7
    HALYARD 5"X9" ZIP POUCH- ASSORTED COLORS
    Murrays Sports
    M8x30mm TITANIUM TORX BOLT
    Murrays Sports
    Righting Bag Only (200+LBS) Murrays Part# 001-3282 This is the bag only from Murrays' popular Cat Righting Big Bag System (#01-3280). The 18" x 32" bag attaches with hook and loop straps under the tramp for easy use and storage. The theoretical maximum capacity of the bag is 250 lbs.
    RIGHTING BAG ONLY (200+LBS)
    Murrays Sports
    HOBIE 18 POWER DOWNHAUL KIT - 5:1 Get powerful downhaul adjustment from any sailing position. This Class-legal, 5:1 downhaul kit for Hobie® 18 includes a space-saving bracket with becket, two Harken bullet cheek blocks, Harken pivoting exit block with micro cleat, Harken double bullet block, trim line, fasteners and instructions.
    H-18 5:1 POWER DOWNHAUL KIT
    Murrays Sports
    Spare Parts Kit: H18 Murrays Part# 001-4221 Why lose a weekend of sailing due to a missing part? Stored in a 5" x 12" zippered pouch, this kit for Hobie® 18 contains the most frequently lost and needed items. Includes shackle tool, two drain plugs with gaskets, aluminum rudder pins, clevis pins and rings kit, 3/16" bow shackle, 1/4" bow shackle and batten tie strings. Pouch comes in assorted colors. Compare to Hobie Cat® #30307.
    H-18 SPARE PARTS KIT:
    Murrays Sports
    H14/16 Upper Gudgeon Murrays Part# 25-3351 This latest, strongest design with welded sleeve bushings provides large, smooth bearing surfaces between rudder pins and gudgeons. Replace flared gudgeons with their sharp edges and point loading that can cause early rudder pin failure. For Hobie® 14's, 16's and 17, order separate upper and lower gudgeons.  For all other Hobie® cats Part# 25-3352 for both gudgeons. Each This gudgeon is a replacement for item #50101301
    H-14/16 UPPER GUDGEON
    Murrays Sports
    ANCHOR PLATE H18SX MAGNUM WINGS
    Murrays Sports
    H-18 PERFORMANCE MANUAL
    Murrays Sports
    MURRAYS H-16 HALYARD GRIP KIT The Murrays H16 Halyard grip kit is a mast hook that hold the jib halyard off center on the mast so that the jib battens don't hang up on the jib halyard when tacking.  Mostly used on the Hobie 16. Compare to Hobie part number 114
    MURRAYS H-16 HALYARD GRIP KIT
    Murrays Sports
    Hobie 16 Batten Tie Set Murrays Part# 001-3816 4 x jib batten ties and 8 main sail batten ties.
    H-16 BATTEN TIE SET
    Murrays Sports
    Hobie 16 Shroud Extra Heavy Duty 5/32" Murrays Part# 002-0205-12 The Murrays Heavy Duty 5/32" Hobie 16 shroud (sidestay) wire is an extra heavy duty shroud for the Hobie 16.  It is 5/32 wire compared to the standard 1/8" wire and we use a roller swaged marine eye fitting on the lower connection point. Our hydraulic swager exerts a force of over 10,000 pounds to quickly swage without work-hardening the stainless fittings. 20790011
    H-16 SHROUD HEAVY DUTY 5/32" WIRE
    Murrays Sports
    The Prindle 16 Forestay 1/8" with turnbuckle for Prindle 16 is constructed to factory specifications. Available with black or white coating Prindle part number 9039 ​Made to order in Carpinteria California, modifications and customization available upon request.
    PRINDLE 16 FORESTAY WITH TURNBUCKLE
    Murrays Sports
    Clew Kit 5-Hole (H16 Jib) Murrays Part# 001-1012 Clew kit for Hobie® 16 jib includes one pair of anodized aluminum plates with rivets to be set with a hammer. Each plate has five holes and measures 8" maximum length by 1-1/2" wide. Replacement rivets are available separately (#19-5006). This product replaces discontinued item #50-22240000.
    H-16 5 HOLE JIB CLEW KIT
    Murrays Sports
    Can't Hurt Trap Rings Murrays Part# 001-0123 Can't Hurt Trap Rings are a light and flexible alternative to "hard" stainless steel dogbones. Black high pressure nylon tubing covers 1/8" (1x19) stainless wire. Compare to Hobie Cat® #2003. Sold in pairs
    CAN'T HURT TRAP RINGS (PR)
    Murrays Sports
    H16 Aussie Pigtail Assy Replacement 5/32" pigtail for Aussie jib halyard kit for Hobie® 16 (#01-3302)
    H-16 AUSSIE PIGTAIL ASSY
    Murrays Sports
    PRINDLE JIB HALYARD WITH SISTER CLIPS
    Murrays Sports
    Murrays Part# 001-1130 Adjustable on the fly and there is no need to cut your trapeze wires for installation! This simplified version of the Hi-low Trapeze Kit utilizes a lower profile block system without the intermediate handle, so there is no need to shorten the trapeze wires. Includes V-jam cleats, back-to-back Ronstan bullet blocks, rope locks and line. Does not include trapeze rings. We suggest purchasing Can't Miss Rings (#01-0124) to supply a handle down low when needed. Order shock cord separately
    Adjustable on the fly and there is no need to cut your trapeze wires for installation! This simplified version of the Hi-low Trapeze Kit utilizes a lower profile block system without the intermediate handle, so there is no need to shorten the trapeze wires. Includes V-jam cleats, back-to-back Ronstan bullet blocks, rope locks and line. Does not include trapeze rings. Show with can't miss rings and trap shock cord. Hobie part 1204
    HIGH-LOW TRAPEZE ADJUSTMENT KIT: NO CUT
    Murrays Sports
    Out of Stock
    Headboard Replacement Kit Murrays Part# 001-1014 Headboard Replacement Kit includes one pair of anodized aluminum plates with rivets to be set with a hammer. Plates measure 5" high x 4" wide x 6-1/4 diagonal. Replacement rivets are available separately (#19-5006).
    HEADBOARD REPLACEMENT KIT
    Murrays Sports
    H20 Shroud 5/32" Black Wire Roller Swaged Murrays Part# 002-0705-12 Single shroud (sidestay) for Hobie® 20 is constructed to factory specifications. Hydraulic swaging produces a cleaner, stronger shroud than standard double swaging. Compare to Hobie Cat® Part# 40792001
    H-20 SHROUD 5/32" BLACK WIRE ROLLER SWAGED
    Murrays Sports
    H14/16 Rudder Return Hand Shock Cord Murrays Part# 001-2240 Two 32" shock cords with balls keep your Hobie® 14 or 16 rudders down when the cams don't! Order Kisme Kleets #05-1010 separately, if needed.
    H-14/16 RUDDER RETURN HAND SHOCK CORD
    Murrays Sports
    Rudder Pins H17, H18, Wave, Getaway (Aluminum) Murrays Part# 001-4274 Aluminum rudder pins for the Hobie 17, 18, Wave and Getaway.  Aluminum 3/8″ x 9-1/4″ rudder pins, cotter pins are included.  Sold in pairs Compare to Hobie Cat® #60880001
    H-17/18/WAVE AND GETAWAY ALUMINUM RUDDER PINS
    Murrays Sports
    Murrays Hobie 16 Trampoline Cover
    Hobie 16 Trampoline Cover - canvas yard cover
    MURRAYS H-14/16 TRAMPOLINE COVER
    Murrays Sports
    Downhaul Kit 3:1 Wave Murrays Part# 001-2029 This is a HCA and Formula Wave Class Legal downhaul kit. The Hobie Wave is a simple boat, and this simple kit helps make downhaul adjustments quick and easy. Installs in minutes with a Philips head screw driver. This can also be an intermediate downhaul kit for the H16 for recreational use, it's not class legal for HCA racing.
    Downhaul Kit 3:1 Wave Murrays Part# 001-2029 This is a HCA and Formula Wave Class Legal downhaul kit. The Hobie Wave is a simple boat, and this simple kit helps make downhaul adjustments quick and easy. Installs in minutes with a Philips head screw driver. This can also be an intermediate downhaul kit for the H16 for recreational use, it's not class legal for HCA racing.
    WAVE DOWNHAUL KIT 3:1
    Murrays Sports
    H-18 Surefoot EVA Deck Grip Kit - Peel and Stick The Hobie 18 Surefoot EVA Deck Grip Kit features 3m peel and stick backing on cut-diamond-textured EVA foam. Ideal rail and or deck grip on all dinghies and catamarans. EVA traction pads offer grip, padding and a long life span.  EVA is a lightweight foam doesn't absorb water the way carpet does, so there is minimal weight when it gets wet and it dries quickly! Hobie 18 kit includes four 3" x 40" strips and four 3" x 20" strips - covers the side rails
    H-18 SUREFOOT EVA Deck PEEL AND STICK GRIP KIT
    Murrays Sports
    Recently viewed