Murrays.com Hobie shroud, forestay, halyard, mast bearing

Murrays

765 products

    Hobie, Nacra and Prindle rigging: shrouds, halyards, bridles, forestays and small parts like mast bearings, trapeze handles, rudder cam kits, rudder pins, righting lines and more.

     

    765 products
    The Murrays Hobie Getaway line package contrains all the lines on a Hobie Getaway. The Main and Jib sheets are Robline Neptune 500 and the control lines are Pelican VLS, Very Low Stretch.
    H-GETAWAY LINE PACKAGE
    Murrays Sports
    Murrays M8 x 25mm Titanium Hydrofoil Screws
    M8x25mm TITANIUM TORX BOLT
    Murrays Sports
    Nylon Port Fastener Kit The Port Nylon Fastener Kit includes all the necessary nylon fasteners (screws, washers and nuts) plus marine silicone sealant for the installation of two access ports, also known as hatches, on to a catamaran like a Hobie, Nacra or Prindle. Use this page to order: 001-1159 White 001-1160 Black
    NYLON PORT FASTENER KIT
    Murrays Sports
    Spare Parts Kit: Wave and Getaway, Hobie part number 30308
    WAVE/GETAWAY SPARE PARTS KIT
    Murrays Sports
    Wing Mount Bar 2 x 1/2" Murrays Part# 19-0020 5/16-18" Hole
    WING MOUNT BAR 2.5 x 1/2"
    Murrays Sports
    Dolphin Striker Eye Bolt H14 Murrays PN 001-0106 This part is used as part of the Murrays H14 Dolphin Striker Kit. Replacement stainless steel post for #01-2083 dolphin striker for Hobie® 14. 19-2524 nylock nut is needed and not included with this part.
    H-14 DOLPHIN STRIKER EYE BOLT
    Murrays Sports
    Catamaran Universal Righting System Murrays Part# 001-8292 The Universal Righting System is simple and effective with large, 1/2" diameter, black polypropylene righting line that is light and easy to access and grip, even when wet. The line self-returns under the tramp after use. There are no knots to pre-tie or untie. The shock cord and pulleys provided hold line snug and are external, so they are easy to adjust and service. Fits 8' to 8'6" wide catamarans; ideal for boats with flush-deck trampoline.
    UNIVERSAL RIGHTING SYSTEM
    Murrays Sports
    Big Cat Catamaran Righting System Murrays Part# 001-8293 The Big Cat Righting System features the extra line needed to bring bigger cats up from turtle position while keeping the deck clear for better footing. The extra length of 1/2" hollow braided line is quickly accessed by unhooking either or both ends of line with carbine hooks. Extra line is neatly suspended just aft of front crossbar and is held in place with shock cord. Blue water tested and proven! The Big Cat Righting System fits Hobie® 20/21, P
    BIG CAT RIGHTING SYSTEM
    Murrays Sports
    H20 Forestay 5/32" Black Wire with 5/16 Stud Murrays Part# 002-0745-82 Lower forestay with 5/16" stud for Hobie® 20 is constructed to factory specifications.  Compare to Hobie Cat® Part# 40822121
    H-20 FORESTAY 5/32" BLACK WIRE WITH 5/16" STUD
    Murrays Sports
    H17 Sport Jib Halyard with Shackle Murrays Part# 002-0386-00 Jib halyard with shackle for Hobie® 17 Sport is constructed to factory specifications. Compare to Hobie Part# 52661001
    H-17 SPORT JIB HALYARD WITH SHACKLE
    Murrays Sports
    Key-Ball Can't Miss Connector  Murrays Part# 001-0142 Can't Miss handles are designed to allow the sailor to hook-up without even looking at the trapeze hook. This lightweight, extra-wide hook-up ring has a center-hold handle with molded finger ridges. Double swaged 1/8" (1x19) wire is color-coated with high pressure nylon tubing. Use this pair of connectors with Carbon Key-Hole Buckle (#01-0311), sold separately.
    KEY-BALL CAN'T MISS CONNECTOR
    Murrays Sports
    Inter 20 Shroud 5/32" Black Wire Roller Swaged Murrays Part# 002-5405-12 Single black shroud for Inter 20 is hydraulically swaged to be clean and strong. Constructed to factory specifications.
    INTER 20 SHROUD 5/32"BLACK WIRE ROLLER SWAGED
    Murrays Sports
    Heavy Duty Swivel Plate for Cleat and Bullseye Murrays Part# 25-3012 Heavy Duty Swivel Plate for Cleat and Bullseye. The HD swivel is the base plate for many catamaran and dingy sheeting systems. Found on all models of Hobie cats, as well as many Nacra and Prindle catamarans, as well as dingies, larger sailboats and cruising craft. The HD version of our Swivel Plate
    HEAVY DUTY SWIVEL PLATE FOR CLEAT AND BULLSEYE
    Murrays Sports
    H20 Jib Halyard with Shackle Murrays Part# 002-0783-50 Jib halyard with shackle for Hobie® 20 is constructed to factory specifications. Compare to Hobie Cat® Part# 41661001
    H-20 JIB HALYARD WITH SHACKLE
    Murrays Sports
    N-5.2 MAIN HALYARD WITH SHACKLE
    Murrays Sports
    N5.2 Shroud 5/32" Roller Swaged Murrays Part# 002-4205-12  Single black shroud for Nacra 5.2 is hydraulically swaged to be clean and strong. Constructed to factory specifications. Compare to Nacra product #9536
    N-5.2 SHROUD 5/32" BLACK WIRE ROLLER SWAGED
    Murrays Sports
    N5.2 Forestay 5/32" Black Wire Murrays Part# 002-4245-12 Forestay for Nacra 5.2 is constructed to factory specifications with 5/32" black-coated wire.
    N-5.2 FORESTAY 5/32" BLACK WIRE
    Murrays Sports
    P19 Shroud 5/32" Black Wire Roller Swaged Murrays Part# 002-2405-12 Single black shroud (sidestay) for Prindle 19 is hydraulically swaged for a cleaner, stronger shroud. Constructed to factory specifications.
    PRINDLE 19 SHROUD 5/32" BLACK WIRE ROLLER SWAGED
    Murrays Sports
    Prindle diamond wire
    PRINDLE 18/18.2 DIAMOND WIRE WITH TURNBUCKLE
    Murrays Sports
    Spare Parts Kit: Nacra Murrays Part# 001-8221 Why lose a weekend of sailing due to a missing part? Stored in a 5" x 12" zippered pouch, this kit contains the most frequently lost and needed items for your Nacra catamaran. Includes shackle tool, two drain plugs with gaskets, aluminum rudder pins, clevis pins and rings kit, 3/16" bow shackle, 1/4" bow shackle and batten tie strings. Pouch comes in assorted colors. Newer Nacras use pintles instead of rudder pins, so the included rudder pins are not
    NACRA SPARE PARTS KIT
    Murrays Sports
    Yoke Stamping Only Stainless Steel Murrays Part# 001-0063 Replacement yoke stamping for #01-0062 hiking stick yoke assembly. Compare to Hobie Cat® #3205.
    YOKE STAMPING ONLY (SS)
    Murrays Sports
    Radio Shoulder Harness Murrays Part# 011-0101 The Radio Shoulder Harness conveniently and securely holds a variety of VHF radio sizes. If your radio is not waterproof, add an Aquapac waterproof case for use in and around water. This harness is ideal for rescue services personnel! Ideal for marine environments, PWC, and sailors.
    RADIO SHOULDER HARNESS
    Murrays Sports
    Tiger Double Trapeze (4 handles) The Murrays Double Trapeze is a set of 4 black or white coated trap wires with 4 handles for double trapezing. A single thimble per pair of handles eliminates clutter at that mast connection. Order shock cord, harness loops and adjustment kits separately. A complete trapeze system requires the following: Harness loop - Can't Miss Ring or Dogbone Trap Shock Cord Trap Adjustment kit Sailing Harness ​Trapeze adjustment kits (#001-1121, 001-1130 or 001-1140, purchased
    N-F18INF DOUBLE TRAPEZE (4)
    Murrays Sports
    Rear Mast Support with "V" Murrays Part# 13-3002
    REAR MAST SUPPORT WITH "V"
    Murrays Sports
    Kissme Jib Traveler Car and Pulley
    KISME "OK" JIB TRAVELER CAR AND PULLEY
    Murrays Sports
    CHEATA BLOCK SET SCREW
    Murrays Sports
    CHEATA ALUMINUM BLOCK
    Murrays Sports
    Out of Stock
    H16 Kissme Jib Sheet & Traveler Upgrade DELUXE Murrays Part# 001-3151 This is the best way to upgrade your vintage H16 jib sheeting system. This kit includes upgraded traveler cars with carbo blocks for smooth function, and Ronstan cam cleats to facilitate smooth and accurate jib traveler position control. Kit Includes: Traveler Cars with Pulleys Corner Casting Cheek Blocks 360 Swiveling Jib Sheet Cleat Traveler Car Control Cam Cleat Traveler Car Control line Auto Center Bungee
    H-16 KISSME JIB SHEET & TRAVELER UPGRADE DELUXE
    Murrays Sports
    Hobie 18 rigging set: Forestay, upper forestay, shrouds, bridles, trapeze wires
    H-18 RIGGING KIT
    Murrays Sports
    Nylon Spacer Murrays Part# 56-4011 Prindle rudder spacer, Prindle part number 4011.
    ILLUSTRATED PRNDLE RUDDER PARTS LIST
    PRINDLE RUDDER SPACER
    Murrays Sports
    Prindle 16 Shroud 1/8" Coated Wire - HD Single shroud (sidestay) for Prindle 16 is constructed to factory specifications. Made with 316 Stainless steal 1x19 PVC coated wire. Double swaged marine thimble on the top and a Hydrolic swaged marine eye on the bottom for increased strength and longevity. Prindle part number 9000
    PRINDLE 16 SHROUD 1/8" WIRE HEAVY DUTY
    Murrays Sports
    Prindle 16 Shroud 1/8" Coated Wire Single shroud (sidestay) for Prindle 16 is constructed to factory specifications. Made with 316 Stainless steal 1x19 PVC coated wire. Marine thimbles on both ends double swaged. Prindle part number 9000
    PRINDLE 16 SHROUD 1/8" WIRE
    Murrays Sports
    H17 Trapeze Wires (2) The H17 Trapeze Wires (2) basic trapeze assembly includes two coated trapeze wires 3/32" (1x19) with nylon handles and a thimble at each end. Wires end just below handles. Order with a trapeze adjustment kit (#01-1121 or 01-1140, purchased separately) and it will be added to wire with no installation charge. Compare to Hobie part number 1471B. ​Order shock cord, Can't miss rings/dog bones and adjustment kits separately. Murrays PN 002-0353-01 002-0353-02
    H-17 TRAPEZE WIRES (2)
    Murrays Sports
    MURRAYS SUNSET TEE, Murrays Marine, Murrays.com
    MURRAYS SUNSET T-SHIRT FRONT
    MURRAYS SUNSET TEE
    Murrays Sports
    The Surefoot EVA Deck Grip Kit is back, now with 3m peel and stick backing on diamond-textured EVA foam. Ideal rail and or deck grip on all dinghies and catamarans. EVA traction pads offer grip, padding and a long life span. EVA is a lightweight foam doesn’t absorb water the way carpet does, so there is minimal weight when it gets wet! Universal Catamaran Kit: Six 3" x 40" peel and stick foam grip strips - will work on virtually any Prindle, Nacra, or any other boat class for railing traction.
    UNIVERSAL SUREFOOT EVA KIT
    Murrays Sports
    Replacement up-loc pin for Hobie EZ LOC rudders. Add the plastic Hobie lanyard, or just use some batten tie line to secure it to the EZ LOC rudder housing. Used on both the Hobie Wave and Hobie Getaway. Compare to Hobie part 50314001
    Replacement up-loc pin for Hobie EZ LOC rudders. Add the plastic Hobie lanyard, or just use some batten tie line to secure it to the EZ LOC rudder housing. Used on both the Hobie Wave and Hobie Getaway. Compare to Hobie part 50314001
    EZ LOC UP-LOCK PIN
    Murrays Sports
    H17 Forestay 1/8" The H17 Forestay 1/8" for Hobie® 17 is constructed to factory specifications. Choose from White or Black wire coating. Compare to Hobie Cat® #50701201.
    H-17 FORESTAY 1/8" WIRE
    Murrays Sports
    H17 Bridle 1/8" The H17 Bridle 1/8" is one bridle for Hobie® 17 constructed of 1/8" wire to factory specifications. Choose from White or Black wire coating. Compare to Hobie Cat Part Number 50701101.
    H-17 BRIDLE 1/8" WIRE
    Murrays Sports
    HOBIE 16 JIB CLEW BLOCK KIT
    Murrays Sports
    Hobie 16 Main Halyard Non-Comptip is a wire halyard for the all-aluminum mast (non Comp-Tip) Hobie 16 and is used to raise the main sail. Constructed to factory specifications, and includes a 2nd stopper as a reef point stopper. This is the standard halyard for Hobie 16's with an all aluminum mast which were standard before 1986. Hobie part number 20651011
    H16 MAIN HALYARD WITH LINE (NON-COMPTIP)
    Murrays Sports
    Recently viewed