Murrays.com Hobie shroud, forestay, halyard, mast bearing

Murrays

760 products

    Hobie, Nacra and Prindle rigging: shrouds, halyards, bridles, forestays and small parts like mast bearings, trapeze handles, rudder cam kits, rudder pins, righting lines and more.

     

    760 products
    Prindle split rings and clevis pin kit, mast hinge pin
    PRINDLE PINS & RINGS KIT
    Murrays Sports
    Sail Pocket Protector Kit Jib Murrays Part# 001-1002 The Jib Sail Pocket Protector Kit includes one pair of tough nylon protectors with indentations for included rivets that are set with a hammer.
    JIB SAIL POCKET PROTECTOR KIT
    Murrays Sports
    Hobie 16 Super Flex Jib Batten Set Hobie part number 0122
    MURRAYS H16 SUPER FLEX JIB BATTEN SET
    Murrays Sports
    Murrays red, green and blue tell tails. Sail trimming guides.
    MURRAYS TELL TAIL SET
    Murrays Sports
    Wave Seat Pad Replacement seat pad for the Hobie Wave catamaran. These pads have an adhesive backing for easy application to your boat. Soft seat pad for the Hobie Wave, identical to pads installed on new boats Includes adhesive backing on bottom of pad for easy application Single pad in light blue as shown - order 4 to complete a full wave Use this page to order product numbers: 50-38010061 Light Blue 50-38010071 Grey Sold individually
    Wave Seat Pad Replacement seat pad for the Hobie Wave catamaran. These pads have an adhesive backing for easy application to your boat. Soft seat pad for the Hobie Wave, identical to pads installed on new boats Includes adhesive backing on bottom of pad for easy application Single pad in light blue as shown - order 4 to complete a full wave Use this page to order product numbers: 50-38010061 Light Blue 50-38010071 Grey Sold individually
    HOBIE WAVE SEAT PAD
    Murrays Sports
    Out of Stock
    Snap Shackle With Tack 1/4" Murrays Part# 22-4501 Swiveling tack shackle with 1/4" clevis pin. Use on hexaratchets on Hobie® 18, Nacra or Prindle. To connect the swivel shackle to an item that requires a 3/16" clevis pin, you will need a 3/16" clevis pin with 7/8" shaft. Also convenient for the jib tack connection on Nacras and Inters.
    SNAP SHACKLE WITH TACK 1/4"
    Murrays Sports
    Wave Forestay 1/8" Black Murrays Part# 002-0844-02 One black forestay for Hobie® Wave is constructed to factory specifications. Compare to Hobie Cat® #39810001.
    WAVE FORESTAY 1/8" BLACK WIRE
    Murrays Sports
    The Murrays Trapeze handle features a contoured grip and a wire guide prevent hand contact with the wire. A recessed cavity in the base holds the nicropress oval and shields the sailor from sharp wire ends. Sold Individually. Hobie uses item #2011 for this handle. Used on Nacra, Prindle and Hobie catamarans.
    Nacra 5.7 Double Trapeze (4 handles) The Murrays Double Trapeze is a set of 4 black or white coated trap wires with 4 handles for double trapezing. A single thimble per pair of handles eliminates clutter at that mast connection. Order shock cord, harness loops and adjustment kits separately. A complete trapeze system requires the following: Harness loop - Can't Miss Ring or Dogbone Trap Shock Cord Trap Adjustment kit Sailing Harness ​Trapeze adjustment kits (#001-1121, 001-1130 or 001-1140, purchased se
    MURRAYS TRAPEZE HANDLE
    Murrays Sports
    Micro D-Splicer Splicing Needle Murrays Extra Small Line Splicer for 1-2mm line The Murrays Extra Small Line Splicer for 1-2mm line is designed to splice really small diameter lines.  It is ideal for making kiteboarding line sets. Material: 316 stainless wire and a copper/nickel end stop Length: 6"
    MICRO D-SPLICER SPLICING NEEDLE
    Murrays Sports
    The Murrays Hobie 16 one piece rudder gudgeon is not cast but machined and then anodized for superior strength and longevity. Compare to Hobie 50102011
    The Murrays Hobie 16 one piece rudder gudgeon is not cast but machined and then anodized for superior strength and longevity. Compare to Hobie 50102011
    MURRAYS H-16 ONE PIECE RUDDER GUDGEON
    Murrays Sports
    H-18/21SC UPPER FORESTAY 5/32" WIRE
    Murrays Sports
    H-16 UPPER FORESTAY 5/32 BARE Murrays PN 002-0235-00 Upper forestay for The Hobie® 16 is constructed of 7x19 - 5/32" bare wire to factory specifications. Compare to Hobie Cat® #20810011. This part is used as part of the classic halyard/ forestay configuration and it holds the stainless pulley that the jib halyard cable attaches to. This will also work to hold your Aussie halyard block assembly.
    Hobie 16 forestay and jib halyard parts chart
    H-16 UPPER FORESTAY 5/32" BARE WIRE
    Murrays Sports
    H16 Jib Halyard with Shackle Murrays Part# 002-0284-00 Jib halyard with shackle for Hobie 16 is constructed to factory specifications. This is for use on the classic style H16 jib halyard system with a metal sheave up near the mast tang that was standard in the 70s and 80s. The rope section of the jib halyard is 20' of 3/16ths line. Compare to Hobie Part# 20661001
    Hobie 16 forestay and jib halyard parts chart
    H-16 JIB HALYARD WITH SHACKLE
    Murrays Sports
    Wave Bridle 1/8" Black Murrays Part# 002-0814-02 One black bridle for Hobie® Wave is constructed to factory specifications. Compare to Hobie Cat® 39822011.
    WAVE BRIDLE 1/8" BLACK WIRE
    Murrays Sports
    clevis pins with split rings for the standing rig and mast stepping systems of Hobie 17, Hobie 20, or Nacra. Kit includes 18 pieces: mast hinge pin, clevis pin assortment, and split ring assortment.  Compare to Hobie Cat #30317.
    H-17/20/NACRA PINS AND RINGS KIT
    Murrays Sports
    Getaway Trapeze Wire (2 Handles) Murrays Part# 002-0953-02 The Murrays Getaway Trapeze is a set of 2 black or white coated trap wires with 2 handles for trapezing. Order shock cord, harness loops and adjustment kits separately.
    GETAWAY TRAPEZE BLACK WIRE (2)
    Murrays Sports
    Rudder Cam Screws H17, H18, H20, Older Wave and Getaway Murrays Part# 001-3551 The Murrays Rudder Cam Pins are a pair of sister screws for use on the Hobie 17, 18, 20, 21, as well as the older Hobie Wave and Getaway rudder cams. These pins are an upgrade form the original stock hollow flare rivet that came on the Hobie. The Sister Screws are much easier to install and remove, and they are reusable. Compare to Hobie Cat® #5203 and #50312301. Sold in pairs
    H-17/18/20/OLDER WAVE AND GETAWAY RUDDER CAM PINS
    Murrays Sports
    Hobie 18 clevis pin kit includes 13 pieces: mast hinge pin, clevis pin assortment, and split ring assortment. Compare to Hobie Part Number #30304 Murrays.com
    H-18 PINS & RINGS KIT
    Murrays Sports
    MURRAYS HOBIE 20 DRAIN PLUG
    MURRAYS H-20 DRAIN PLUG
    Murrays Sports
    Murrays Original Hobie 14 & 16 Jib traveler car for pre 1994 boats with the external track on the front crossbar. 21230000
    MURRAYS H-14/16 JIB TRAVELER CAR
    Murrays Sports
    Hobie 18 forestay - Hobie part number 60810021 white or 60812021 black
    H-18/21SC FORESTAY 5/32" WIRE
    Murrays Sports
    H18 Telo-Cat/Hobie Vane Adapter Murrays Part# 008-1451 Adapts the Telo-Cat (#08-1450) or Hobie® (#04-7703) vane to the Hobie 18 furling drum. When using to adapt a Telo-Cat vane for use on a Hobie 18, it is necessary to enlarge one hole in the plastic part of the vane to accommodate a clevis pin. Hobie Cat® Part# CM7705
    ROLLER FURLER BRIDLE VANE ADAPTER
    Murrays Sports
    Sale
    Comp-Tip Cover: H-16/18/20 Murrays Part# 31-2441 Hobie Cat recommends that CompTips on Hobie 16, 17, 18 and 20 be covered to protect them from ultraviolet light. Top quality polyester material is treated for UV-resistance and provides much better and long-lasting protection than nylon covers. Highly visible, red-tip reinforced end. Cover ties to mast with included line.
    H-16/18/20 COMP-TIP COVER
    Murrays Sports
    Save $26
    H16 Rigging Set 2009 Spec All parts needed for 2021 Race Ready Boat! If you're trying to update your old boat or just need new rigging for your late model Hobie 16, this is the complete package. Whether your racing or just putting around the lake, this kit is accommodates the current rigging standard for factory sails and production boats. All of our rigging is made from 316 stainless steel wire. Thimbles are swaged using our custom hydraulic swaging machine for years of reliable service.
    H-16 RIGGING SET 2009 SPEC
    Murrays Sports
    The Aussie Jib Halyard Kit for the Hobie 16 allows easier tacking, better mast rotation and consistent mast bend! Reduce mast compression by 66%!  Use with one piece Aussie Jib Forestay. Or use an upper forestay and a separate Aussie Forestay. The Hobie 16 Aussie Jib Halyard Kit includes everything you need to connect your jib halyard to the Aussie forestay Pigtail: hardware with all Harken blocks, 70' of pre-stretched line, fairlead with rivets, zippered pouch and instructions. Class legal for racing.
    Hobie 16 Aussie Jib Halyard Kit with Pigtail Murrays Part# 001-3302 Reduce mast compression by 66%! The Aussie Jib Halyard Kit for the Hobie® 16 allows easier tacking, better mast rotation and consistent mast bend! Use with existing lower forestay. The "fail-safe" pigtail keeps block failure from resulting in de-masting. A similar system is stock on new Hobie 16's. Complete kit includes everything you need: hardware with all Harken blocks, 70' of prestretched line, zippered pouch and instructions. 80660000
    H-16 AUSSIE JIB HALYARD KIT
    Murrays Sports
    Harken Swivel with Carbo Cam Bullseye Murrays Part# 25-3010 Swivel cam cleats are ideal for main traveler control and up-release jib cleating systems. Cam cleats and fairleads should be selected on the basis of need. Order plastic base pads and flat head screws separately to mount to your front crossbar.
    HEAVY DUTY SWIVEL WITH CARBO CAM & BULLSEYE
    Murrays Sports
    Replace a 3/16" bow shackle with this quick-release version to add convenience. Can be used on 2-1/4" blocks. Compare to Hobie Cat® #3062.
    QUICK RELEASE 3/16" BOW SHACKLE
    Murrays Sports
    The Murrays Rudder Cam Sister Screws: Hobie 14, Hobie 16 are a pair of sister screws for Hobie 14 and 16 rudder cams. These pins are much easier to install and remove than the stock pin and they are reusable! Sold in pairs Hobie Cat Part# 10470000 Hobie Part# 5201
    The Murrays Rudder Cam Sister Screws: Hobie 14, Hobie 16 are a pair of sister screws for Hobie 14 and 16 rudder cams. These pins are much easier to install and remove than the stock pin and they are reusable! Sold in pairs Hobie Cat Part# 10470000 Hobie Part# 5201
    H-14/16 RUDDER CAM SISTER SCREWS
    Murrays Sports
    H-16 Jib Batten Set The H-16 Jib Batten Set includes 4 Hobie 16 jib battens. Your choice of white Tren Tec batten caps or black Hobie leech caps. Slightly diamond/oval profile fiberglass battens. Current Batten Lengths: 30″, 44″, 58″, 67″ Fits all generations of Hobie Jibs.  You can easily cut them shorter if desired. Hobie part # 82070001 and 82080001
    H-16 JIB FIBERGLASS BATTEN SET
    Murrays Sports
    The Aussie forestay replaced the original upper and lower forestay system in 2009 on the Hobie 16 as the factory standard. It is modeled after what the dominant Aussie racers using on their boats. Aussie forestays are longer than the classic halyard forestays actually have a separate connection cable for the jib halyard. The separate attachment point for the jib halyard provides a back up if either were to fail. If either the forestay or jib halyard were to break, the other will hold the m
    H-16 AUSSIE FORESTAY
    Murrays Sports
    Hobie Getaway Forward Trampoline - 2002-2017 - black mesh Compare to Hobie part number ​37980055
    Hobie Getaway Forward Trampoline
    GETAWAY FORWARD TRAMPOLINE 2002-17
    Murrays Sports
    18SQ Forestay 5/32 Black Murrays Part# 002-5045-02 Black coated forestay for your NACRA 18 Square built to original specifications.
    H-14 FORESTAY 1/8" WIRE
    Murrays Sports
    Hobie 18 Bridle wire - Hobie part number #60820001 white or #60822001 black.
    H-18 BRIDLE 5/32" BLACK WIRE
    Murrays Sports
    H-18/21 Sport Cruiser Jib Halyard with Shackle Murrays Part# 002-0486-00 Jib halyard with shackle for H18/21 Sport Cruiser is constructed to factory specifications. Please note that the H21SC is differentiated by its 8.5' beam, front trampoline and Hobie® 18 rigging. Order Jib Halyard line separately: 20' of 1/8" line Murrays Part# 39-0221
    H-18/21SC JIB HALYARD WITH SHACKLE
    Murrays Sports
    H14/16 Hawaiian Catamaran Righting System Murrays Part# 001-3293 The Hawaiian Catamaran Righting System doubles as a preventer line. Big 1/2" braided righting line is suspended by shock cord under the trampoline. Lines terminate at the transom. Behind-the-back support allows lighter crews to combine weight or solo skippers to have a free hand for scooping up water (as with the Bucket Up Righting Aid) to add leverage. Racing class legal.
    H-14/16 HAWAIIAN RIGHTING
    Murrays Sports
    Mini Cam Kit for Elliptical Surface Murrays Part# 001-0112 Mount a mini cam cleat, in any orientation, on almost any elliptical surface. Fits most elliptical surfaces: Hobie®, Nacra, Prindle masts and most others; Hobie and Prindle main beams, etc. You drill holes in the pad to suit your desired line/cleat orientation.
    MINI CAM KIT FOR ELLIPTICAL SURFACE
    Murrays Sports
    Powerstick Cork Ball Grip Kit
    ARRIBA CORK BALL GRIP KIT Murrays Part# 44-0002 The Cork Ball Grip Kit replaces the stock Arriba, Murrays Aluminum Tiller and Hot Stick end grips. The ball is predrilled, lightweight and makes the hiking stick easier to hold. The inside diameter is 1-1/8". Epoxy adhesive is included. Hobie Cat® item #FXGRIP. Order epoxy (#00-0002-1) to "caramel-coat" the cork ball handle to make it last longer
    1.5" POWER STICK CORK BALL GRIP KIT
    Murrays Sports
    H14 Shroud 1/8" One shroud (sidestay) for Hobie® 14 constructed of 1/8" wire to factory specifications. Connect at top with #21-0635 1/4" bow shackle; connect to stay adjuster with #22-9802 clevis pin. Use this page to order product numbers: 02-0104-01 White 02-0104-02 Black Hobie Cat® Part# 10792100
    H-14 SHROUD 1/8" WIRE
    Murrays Sports
    Murrays Sports gift card Murrays.com
    MURRAYS SPORTS GIFT CARD
    Murrays Sports
    JIB CLEW BLOCK KIT
    Murrays Sports
    Recently viewed