All Sailing Parts

All Sailing Parts

2266 products

Everything Nacra, Prindle, Hobie and a few more fun odds and ends.

2266 products

Sort

Used for tiller connection on Hobie Cats®. The stainless 1/4-20 stainless steel hex nut with nylock insert will not rust or work loose if properly installed. Equivalent to Hobie #8050111. Also Equivalent to Nacra/Prindle F123 gudgon nut for all Prindle and older Nacras.
Applications:
Hobie 18 / H18:
Bow Tang Nut Qty: 6
Rudder Adjustment: 1
Hobie Getaway: Forestay Yoke Nut

NYLOCK NUT 1/4-20 SS

H-16 JIB BATTEN 44"

44" Murrays jib batten with a trentec batten cap.  

Batten #3 in a Hobie jib batten set - 20400001

It is also use for the batten #8 on a Hobie 16 main sail batten set - 21000001

H-16 JIB FIBERGLASS BATTEN 44"

WAVE MAST BASE new S/N 1438 UP

Traveler Ball Bearing H18 61852000

Murrays Part# 50-61850000

The Traveler Ball Bearing H18 is the stock Hobie 18 Main sheet traveler car ball beaing. This ball can be used in place of cylinder bearing #50-61860000 to bring the traveler back to what came stock on the Hobie 18.

The difference between the traveler ball and the cylinder is that the balls allow the car to move faster but they wear down quicker. Hobie has stopped making the Hobie 18 traveler balls, but Murrays found their source and made more!

Hobie 18 main traveler car parts list - 6180001, 8040301, 61870000, 61880000, 60190000, 8050311, 61842000, 8060121, 61810000, 61830000, 61852000, 8020431

H-18 TRAVELER BALL BEARING

Rudder Blade EZ Lock With Indents

Murrays Part# 50-20491000

Hobie is no longer producing two different nylon rudder blades. Use this part to replace your plastic rudder blades for Hobie 14, 16, 17 and 18 beach cats. This is the standard part that comes on Hobie Wave and Hobie Getaway boats with EZ Loc rudder systems

RUDDER BLADE EZ LOCK WITH INDENTS

Mast Ball H17 Wave
Murrays Part# 50-50212301
Hobie factory replacement mast ball for Hobie® 17 and Wave. Ball measures 1-1/2" diameter with a 9/16"-18 threaded hole. This ball can also be glued for use on Trac 16.

H-17/WAVE MAST BALL

Eyestrap Wave Bridle
Murrays Part# 50-38120011
Hobie® factory replacement eyestrap for Hobie Wave bridle.

WAVE BRIDLE EYESTRAP

Clevis Pin 1/4 X 3/4"

Murrays Part# 56-4012

The Clevis Pin 1/4 X 3/4" is used on Prindle rudders, Nacra mast head sheave and as Nacra/Prindle shroud pin.

Prindle Part# 4012

CLEVIS PIN 1/4 X 3/4"

Rudder Pins H14/16 Pair (Nylon)

Murrays Part# 001-2271

Nylatron rudder pins are sacrificial for use in the surf (they'll break before your rudder system does) and should be inspected often for wear. Pair of 3/8" x 8" rudder pins with cotter pins for Hobie® 14 or Hobie® 16.

Each pair is equivalent to two Hobie Cat® item #10881000

Sold in pairs

H-14/16 NYLON RUDDER PINS PR

Rudder Pins H17, H18, Wave, Getaway (Aluminum)
Murrays Part# 001-4274
Aluminum rudder pins for the Hobie 17, 18, Wave and Getaway.  Aluminum 3/8″ x 9-1/4″ rudder pins, cotter pins are included. 

Sold in pairs

Compare to Hobie Cat® #60880001

H-17/18/WAVE AND GETAWAY ALUMINUM RUDDER PINS

Jib Clew Pigtail Kit

Murrays Part# 001-4015

Easy-connect Dyneema® jib clew pigtail. Speed up tacks and improve sail shape by moving jib clew blocks away from the jib clew.

Color may vary from picture.

Features:

jib Clew Pigtails move jib clew blocks about 14" from jib clew— saves 4 feet of sheeting/unsheeting per tack!
"Locked" eye splices— jib blocks cannot slip or un-tie.
Save weight (only 2.4oz) and move weight away from jib clew— better sail shape in light wind.
Lightweight, easy-connect—

jib clew pigtail attachment close up

JIB CLEW PIGTAIL KIT

Clevis Pin 1/4 X 1-1/8
Murrays Part# 22-9803
Stainless steel clevis pin measures 1/4" diameter x 1-1/8" grip length (shoulder to the split ring hole).
Compare to Hobie Part 8020420 and 8020410

CLEVIS PIN 1/4 X 1-1/8"

Ronstan Bullseye with Ferrule

Murrays Part# 25-0323

Stainless ferrule eliminates with nylon housing, the stainless center coating prevents grooving and wear from uses. Allows for up to 7/16" line capacity.

Mounting: Two screws ordered separately (#10-32x1") part number 19-2915.

RONSTAN BULLSEYE FAIRLEAD WITH FERRULE

Murrays Hobie 16 Trampoline Cover

Hobie 16 Trampoline Cover - canvas yard cover

MURRAYS H-14/16 TRAMPOLINE COVER

HIGH-LOW TRAPEZE ADJUSTMENT KIT: NO CUT

H16/18 Jib Halyard Block Assembly

Murrays Part# 50-20240001

Wire jib halyard block for Hobie 16 or 18 has a sheave diameter of 1-1/2". This is a good upgrade for boats with jib halyard blocks that have a diameter smaller than 1-1/2".

Hobie part# 20240001

Hobie 16 forestay and jib halyard parts chart

HOBIE 16/18 JIB HALYARD BLOCK ASSEMBLY

Harken Sail Chafe Protector

Murrays Part# 28-0285

Harken's Sail Chafe Protector Set replaces the diamond wire rollers to protect the jib from chafing on the diamond wire spreader. The split rollers are pre-drilled to fit up to 3/16" wire. Each 2-3/4"-diameter (70mm) protector has two pieces that snap together for easy installation. Used on Hobie 18, Hobie 20, Prindle 18.2, Prindle 19, Nacra 15, 17, 18, Inter 20, F18

HARKEN SAIL CHAFE PROTECTOR (2)

Harken 38mm Standard Eyestrap

Murrays Part# 28-0137

Eyestrap fits #28-0150 and #28-0365 cams. 3000 lb. breaking strength. Use 1/4" RH fasteners with 1-1/2" spacing.
Eyestraps are useful accessories. They form light-duty mounting bases for blocks, serve as lash-down points, and can be used for fairleads.

HARKEN 38MM STANDARD EYESTRAP

Stainless steel clevis pin. Measurement is 1/4" diameter x 1-3/4" grip length (shoulder to the split ring hole).

Uses:

This pin replaces #56-7809, gooseneck clevis pin for Nacra 5.2 and all Prindles.

Hobie 18 main traveler car 

Prindle Part# 6004

 Comparable to Hobie Cat® Part# 8020431

CLEVIS PIN 1/4 X 1-3/8"

H-16 JIB CLEW BLOCK KIT

Hobie Mast Step Pin 3/16 x 2 1/8" - 8020080

Replacement Hobie 14 and Hobie 16 mast step pin.

Measures 3/16" x 2-1/8"

Used with the Hobie mast step link kit 21380001 for raising and lowering the mast on a Hobie 14 and 16.

Also called Hobie 16 mast hinge pin, mast step hinge pin, mast base pin, mast step link pin...

Hobie part number 8020080

HOBIE MAST STEP PIN 3/16 X 2 1/8 - 8020080

The Prindle 16 Forestay 1/8" with turnbuckle for Prindle 16 is constructed to factory specifications.

Available with black or white coating

Prindle part number 9039

Made to order in Carpinteria California, modifications and customization available upon request.

PRINDLE 16 FORESTAY WITH TURNBUCKLE

Ronstan 50mm ClearStart Sailing Watch

RONSTAN 50MM CLEAR START SAILING WATCH

5"X12" Zip Pouch-Assorted Colors

Murrays Part# 31-1401

The Murrays Zip Pouch 5"X12" is constructed of rugged, water-resistant material with plastic hooks at each end to attach to the center or aft tramp lacing. The pouch provides handy storage for replacement parts, keys, and safety gear. Assorted colors. We have this pouch made for us right here in the U.S.A.

Compare to Hobie Cat® stow bag #72000B and 72005B

5"X12" ZIP POUCH-ASSORTED COLORS

Hobie Rudder Covers

Murrays PN 50-82420000

Rudder covers by Hobie protect your rudders from nicks and grime. Hobie's rudder covers feature straps with Fastex® fasteners to keep the covers firmly in place, even when trailering. The covers fit all Hobies except H21SE (Special Edition).

These come as a pair.

Hobie part number 82420000

HOBIE RUDDER COVER

Spare Parts Kit: H18

Murrays Part# 001-4221

Why lose a weekend of sailing due to a missing part? Stored in a 5" x 12" zippered pouch, this kit for Hobie® 18 contains the most frequently lost and needed items. Includes shackle tool, two drain plugs with gaskets, aluminum rudder pins, clevis pins and rings kit, 3/16" bow shackle, 1/4" bow shackle and batten tie strings. Pouch comes in assorted colors. Compare to Hobie Cat® #30307.

H-18 SPARE PARTS KIT:

Air Flow Tels Set

Murrays Part# 007-0334

Air-flow Tels are wind-on-the-sail indicators that show the air flow across the sails, allowing you to trim sails for maximum performance. The result is better boat speed, less pinching, and no guesswork about placing the jib sheet lead forward or aft. No holes are required in the sails; waterproof adhesive locator discs attach the Tels. Tels are made of ripstop nylon for maximum sensitivity and long life.

AIR FLOW TELS SET

Roller Furling Drum Forestay Adjuster

Murrays Part# 50-60830000

Hobie® factory replacement 13-hole adjuster for roller furler.

Hobie Part# 60830000

ROLLER FURLING DRUM FORESTAY ADJUSTER

Getaway Mast Base Casting

Murrays Part# 50-37641001

Hobie® factory replacement mast base casting for Getaway. Use four #19-5032 stainless rivets and four #19-5020 casings for installation.

GETAWAY MAST BASE CASTING

Ronstan 3/16 Twisted D Shackle

Murrays Part# 21-0628

Stainless steel twisted D-shackle has a 3/16" pin.

RONSTAN 3/16" TWISTED D SHACKLE

H14/16 Main Halyard Hook

Murrays Part# 25-3330

The main halyard hook is used on the Hobie 14, Hobie 16, Wave, Getaway, Prindles, Sol Cats and Nacras that use a wire halyard. Use two 6-4 rivets (#19-5031) and two casings (#19-5020) for installation.

Hobie part# 10680000
Nacra part number 6812

H-14/16 MAIN HALYARD HOOK

Hobie 18 Bridle wire - Hobie part number #60820001 white or #60822001 black.

H-18 BRIDLE 5/32" BLACK WIRE

H14/16/17/18 Gudgeon Lower

Murrays Part# 25-3352

The latest, strongest rudder gudgeon design with welded sleeve bushings provides large, smooth bearing surfaces between rudder pins and gudgeons. Replace flared gudgeons with their sharp edges and point loading that can cause early rudder pin failure. For Hobie® 14, 16 and 17, order separate upper and lower gudgeons. For all other Hobie® cats with new-style castings, post 1986, order 4 for a complete set .

Replacement for Hobie Part# 50101401

Upper rudder gudgeon for the Hobie 14 and 16. This updated, strongest design with welded sleeve bushings provides large, smooth bearing surfaces between rudder pins and gudgeons. Replace flared gudgeons with their sharp edges and point loading that can cause early rudder pin failure. For Hobie 14's, 16's and 17, order separate upper and lower gudgeons.

 For all other Hobie® cats Part# 25-3352 for both gudgeons. Each

This gudgeon is a replacement for item #50101301

H-14/16/17/18 LOWER GUDGEON

Tiller Connection Kit
Murrays Part# 001-2061
The Murrays Tiller Connection Kit assures consistent rudder alignment through the full rudder sweep. Spring-loaded half balls and contoured spacers take the slop out of the tiller-to-crossbar connection on Hobie Cats. Racing class legal. Each kit contains 2 connectors to join the tiller crossbar to the tiller arms. Compare to Hobie Cat® #3052.
Applications:; Hobie 14, 16, 17, 18, 18SX

PLASTIC CONTOURED SPACER

Cat trax beach wheels Hobie, Nacra, Prindle catamaran

CAT TRAX BEACHCAT DOLLY

The super comfortable, compact design of the Rooster Diamond Overhead Buoyancy Vest features a high cut waist to allow unrestricted movement and easy access to a trapeze hook. The highly adjustable shoulder and waist straps ensures a great fit for different body shapes, while the recessed, neoprene-covered buckles removes the risk of snagging on ropes and rigging. Strong, rip-stop fabric ensures longevity and provides greater wear resistance with reflective panels for improved visibility. The front pocket i

ROOSTER DIAMOND BUOYANCY VEST

Low Stretch 8-Strand 1/8 Black
Murrays Part# 39-2309BK
The result of design technology combining low-stretch, high strength and chafe resistance into one rope. Similar to Prestretched, but its softer, less textured finish means less friction in multi-purchase systems. Made in the USA. Sold per foot. Spool: 250' (76.2m). Compare to white Hobie Cat® line #RH018WHT or RH112WHT.

We recommend this line for use on batten ties and roller furling line, Prindle jib halyards and Prindle tramp lacing. This is

1/8" LOW STRETCH 8-STRAND 3MM

HARKEN H-16 RACE 6:1 MAIN SHEET SYSTEM

Ronstan 24mm Sister Clip

Murrays Part# 21-0536

Stainless steel mini sister clip is a quick connector with no moving parts.

Sister clip, 7mm (9/32") eye clearance. Effective means of quickly attaching and detaching ropes

RONSTAN 24MM SISTER CLIP (EACH)

Cat Righter Uphaul: Cam-Clt 4:1

Murrays Part# 001-3273

This is the 4:1 block and tackle system only from Murrays' popular Cat Righting Big Bag System (#01-3280). Use with a righting bag to aid in righting a capsized catamaran.

CAT RIGHTER UPHAUL: CAM-CLEAT 4:1

Previous 1 … 6 7 8 9 10 … 57 Next

Recently viewed

All Sailing Parts