All Sailing Parts

All Sailing Parts

2261 products

    Everything Nacra, Prindle, Hobie and a few more fun odds and ends.

    2261 products
    Righting Bag Only (200+LBS) Murrays Part# 001-3282 This is the bag only from Murrays' popular Cat Righting Big Bag System (#01-3280). The 18" x 32" bag attaches with hook and loop straps under the tramp for easy use and storage. The theoretical maximum capacity of the bag is 250 lbs.
    RIGHTING BAG ONLY (200+LBS)
    Murrays Sports
    MURRAYS HOBIE 20 DRAIN PLUG
    MURRAYS H-20 DRAIN PLUG
    Murrays Sports
    Wave Mainsheet S Hook Murrays Part# 50-38900031 Hobie® factory replacement S-hook for Wave mainsheet. Mainsheet is 35 feet of Dacron® spun braid #39-055. Makes it easy to attach mainsheet to sail and standard on all new boats. Hobie Part# 38900031
    WAVE MAINSTEET S HOOK
    Hobie
    H14/16 Aluminum Rudder Pins Murrays Part# 001-2272 Aluminum rudder pins are standard on Hobie® 14 and 16 and are good for all-around, low maintenance use. Pair of 3/8" x 8" rudder pins with cotter pins. New One piece rudder gudgeons have been produced with a slightly smaller metric hole size. If you have a 2020 and newer boat or 2020 and newer one piece gudgeons, our aluminum rudder pins may require force to install and be difficult to remove. The stainless pins are a better fit. Sold in pairs
    Aluminum rudder pins are standard on Hobie® 14 and 16 and are good for all-around, low maintenance use. Pair of 3/8" x 8" rudder pins with cotter pins. New One piece rudder gudgeons have been produced with a slightly smaller metric hole size. If you have a 2020 and newer boat or 2020 and newer one piece gudgeons, our aluminum rudder pins may require force to install and be difficult to remove. The stainless pins are a better fit. Sold in pairs Each pair is equivalent to two Hobie Cat® item# 20880001 (each)
    H-14/16 ALUMINUM RUDDER PINS
    Murrays Sports
    Hobie 16 Shroud Extra Heavy Duty 5/32" Murrays Part# 002-0205-12 The Murrays Heavy Duty 5/32" Hobie 16 shroud (sidestay) wire is an extra heavy duty shroud for the Hobie 16.  It is 5/32 wire compared to the standard 1/8" wire and we use a roller swaged marine eye fitting on the lower connection point. Our hydraulic swager exerts a force of over 10,000 pounds to quickly swage without work-hardening the stainless fittings. 20790011
    H-16 SHROUD HEAVY DUTY 5/32" WIRE
    Murrays Sports
    Rudder Locking Bolt Murrays Part# 56-4017 The Prindle Rudder Locking Bolt is the factory replacement bolt for rudder locking system on all Prindles. Tip: Be sure to check for proper alignment of the lock bolt to spring bolt. Any bent component will prevent the system from working properly. Identify and replace the bent portion to get your rudder system functioning properly. Performance Sports factory item# 4017
    Prindle rudder locking system parts diagram. Lock bolt, half round load spreader, lock nut. Murrays.com
    PRINDLE RUDDER LOCKING BOLT
    NACRA
    Batten Cap Leech Adjustable H16 Jib Murrays Part# 012-3004 No more knots at the trailing edge. Adjust Hobie® 16 jib sail shape in seconds without tying and untying knots. Release tension to prolong sail shape and life. Individual cap. Sold in packages of 4
    ADJUSTABLE JIB BATTEN CAPS (4)
    Tren-Tec
    Rivet MCP 6-6 (3/16 X 3/8) Murrays Part# 19-5022 Rounded pan head 3/16" x 3/8" Monel rivet. Compare to SS version Hobie Cat® #8010131.
    RIVET MCP 6-6
    Misc
    Harken Sail Chafe Protector Murrays Part# 28-0285 Harken's Sail Chafe Protector Set replaces the diamond wire rollers to protect the jib from chafing on the diamond wire spreader. The split rollers are pre-drilled to fit up to 3/16" wire. Each 2-3/4"-diameter (70mm) protector has two pieces that snap together for easy installation. Used on Hobie 18, Hobie 20, Prindle 18.2, Prindle 19, Nacra 15, 17, 18, Inter 20, F18
    HARKEN SAIL CHAFE PROTECTOR (2)
    Harken
    H-18/21 Sport Cruiser Jib Halyard with Shackle Murrays Part# 002-0486-00 Jib halyard with shackle for H18/21 Sport Cruiser is constructed to factory specifications. Please note that the H21SC is differentiated by its 8.5' beam, front trampoline and Hobie® 18 rigging. Order Jib Halyard line separately: 20' of 1/8" line Murrays Part# 39-0221
    H-18/21SC JIB HALYARD WITH SHACKLE
    Murrays Sports
    Hobie 18 forestay - Hobie part number 60810021 white or 60812021 black
    H-18/21SC FORESTAY 5/32" WIRE
    Murrays Sports
    MAGIC MARINE SMART HARNESS CE
    Magic Marine
    Out of Stock
    Port-Lance Cleat Murrays Part# 007-359P The Lance Cleat - Port utilizes a single rugged aluminum alloy cam mounted vertically in a black molded frame. The rope slides in sideways and runs freely thru the fairlead, which has a colored roller incorporated in the top for easier sheeting and identification. Ideal for use in confined spaces. For use with 3/16 to 1/4" line. The base is 22mm x 30mm.
    PORT-LANCE CLEAT
    RWO
    Hobie 378 Replacement vane for Telo-Cat™ and Black Max is constructed of tough, high-impact plastic vane with visible trim markings.
    TELO-CAT REPLACEMENT VANE - DISCONTINUED
    Davis
    Quick Release Detent Pin 1/4 X 3" Murrays Part# 18-4D300 Economical quick release pin has a spring-loaded ball that exerts sufficient pressure to help avoid accidental release. Measurements are 1/4" diameter x 3" maximum grip length (distance from the shoulder to the locking ball bearings). Uses: - Use as mast step pin on Hobie® 21 and Prindle 16/18/18-2/19 cats. Compare to Hobie part # 8020501
    Quick Release Detent Pin 1/4 X 3" Murrays Part# 18-4D300 Economical quick release pin has a spring-loaded ball that exerts sufficient pressure to help avoid accidental release. Measurements are 1/4" diameter x 3" maximum grip length (distance from the shoulder to the locking ball bearings). Uses: - Use as mast step pin on Hobie® 21 and Prindle 16/18/18-2/19 cats. Compare to Hobie part # 8020501
    QUICK RELEASE DETENT PIN 1/4 X 3"
    Misc
    Hobie 20-style factory tiller connector post. Part of the Hobie 1953 tiller connection system. Hobie part number 40530000 and 40530001
    Hobie 1953 tiller connection kit - new style
    H-20 TILLER CONNECTOR POST
    Hobie
    Hobie Sail Feeder Kit Murrays Part# 50-80100501 Replacement sail feeder for use on many Hobie Cat mast assemblies to make raising your mainsail easier than ever! Hobie®'s Sail Feeder helps the sail feed evenly into the mast track without catching and/or tearing the sail.
    Hobie Sail Feeder Kit Murrays Part# 50-80100501 Replacement sail feeder for use on many Hobie Cat mast assemblies to make raising your mainsail easier than ever! Hobie's Sail Feeder helps the sail feed evenly into the mast track without catching and/or tearing the sail.
    HOBIE SAIL FEEDER KIT
    Hobie
    Shock Cord Tramp Lacing Kit H14/16/18 Murrays Part# 001-2241 Shock Cord Tramp Lacing Kit H14, 16, 18 is for the recreational sailor who is lacing a trampoline. Shock Cord is usually the better choice over line tramp lacing. Just "set it and forget it" because shock cord maintains the tension you set when lacing your tramp. Shock cord also reduces tramp and grommet wear because the load is spread over multiple grommets, especially when walking on the tramp. The latest technology shock cord used in our kits
    H-14/16/18 SHOCK CORD TRAMP LACING KIT
    Murrays Sports
    Harken Swivel with Carbo Cam Bullseye Murrays Part# 25-3010 Swivel cam cleats are ideal for main traveler control and up-release jib cleating systems. Cam cleats and fairleads should be selected on the basis of need. Order plastic base pads and flat head screws separately to mount to your front crossbar.
    HEAVY DUTY SWIVEL WITH CARBO CAM & BULLSEYE
    Murrays Sports
    Ronstan Series 19 C-Track End Cap Murrays Part# 21-0366 These are End Stops for the new C-Track by Ronstan. Similar to the stainless tracks used on H18 and H16 in the past. Track end, plastic Best replacement for End stop for 5/8" jib track as on Hobie® 16 or Hobie® 18. The end stop can be fastened with #19-1620 screw or #19-5021 6-4 countersunk rivet. Compare to Hobie Cat part #20260000.
    RONSTAN JIB TRACK END CAP
    Ronstan
    Harken 22mm Spring Murrays Part# 28-0071 Harken universal stand-up spring supports blocks on pad eyes, eyestraps, bases and traveler cars. Weight: .32 oz. This works well with snap shackle w/tack to upgrade a typical beachcat mainsheet system.
    HARKEN 22MM SPRING
    Harken
    Out of Stock
    HOBIE 16 MAINSAIL BATTEN CAP KIT - LEACH - 1522H
    H-16 MAINSAIL BATTEN LEACH CAP KIT (8)
    Hobie
    Wind Vane Replacement Tips and Washers  Coffee Marine Wind Vane Tip and Washer kit that fits the original Coffee Marine Bridle Vane and the Hobie Standard Bridle Vane. These are easy to knock off or misplace. Stash a couple in your tool box and never be without your trusty Bridle Fly! 
    WIND VANE REPLACEMENT TIPS & WASHERS
    Murrays Sports
    H-18 Surefoot EVA Deck Grip Kit - Peel and Stick The Hobie 18 Surefoot EVA Deck Grip Kit features 3m peel and stick backing on cut-diamond-textured EVA foam. Ideal rail and or deck grip on all dinghies and catamarans. EVA traction pads offer grip, padding and a long life span.  EVA is a lightweight foam doesn't absorb water the way carpet does, so there is minimal weight when it gets wet and it dries quickly! Hobie 18 kit includes four 3" x 40" strips and four 3" x 20" strips - covers the side rails
    H-18 SUREFOOT EVA Deck PEEL AND STICK GRIP KIT
    Murrays Sports
    5"X12" Zip Pouch-Assorted Colors Murrays Part# 31-1401 The Murrays Zip Pouch 5"X12" is constructed of rugged, water-resistant material with plastic hooks at each end to attach to the center or aft tramp lacing. The pouch provides handy storage for replacement parts, keys, and safety gear. Assorted colors. We have this pouch made for us right here in the U.S.A. Compare to Hobie Cat® stow bag #72000B and 72005B
    5"X12" ZIP POUCH-ASSORTED COLORS
    Murrays Sports
    Hobie Rudder Covers Murrays PN 50-82420000 Rudder covers by Hobie protect your rudders from nicks and grime. Hobie's rudder covers feature straps with Fastex® fasteners to keep the covers firmly in place, even when trailering. The covers fit all Hobies except H21SE (Special Edition). These come as a pair. Hobie part number 82420000
    HOBIE RUDDER COVER
    Hobie
    A Multi-Sport / Water / Reef Helmet Hat. Purposely designed for Indo Surfing, Kitesurf, kiteboarding, Windsurf, Sailing, Kayaking & Wingboarding. It has a Hard protective shell for light / medium impacts. Non-water absorbent Foam with Water Proof Lining built for Flex Comfortability
    SURF AND FOIL IMPACT HAT
    Misc
    HARKEN 6MM BOW SHACKLE
    Harken
    Adjustable Leech Batten Caps H16 Murrays Part# 012-3003 No more knots at the trailing edge. Adjustable batten caps for Hobie® 16 enable sail shape adjustment in seconds without tying and untying knots. Release tension to prolong sail shape and life. This Perfect Pocket kit by Tren Tec includes 8 batten caps and pre-cut line.
    H-16 ADJUSTABLE BATTEN LEECH CAPS (8)
    Tren-Tec
    Batten Caps Leech Adjustable Prindle 16 Murrays Part#012-6003 No more knots at the trailing edge. These leech batten caps adjust sail shape in seconds without tying and untying knots. Release tension to prolong sail shape and life. This Perfect Pocket kit by Tren Tec includes 9 batten caps for Prindle 16 and pre-cut line. Tren Tec adjustable batten caps for Prindle catamaran mainsails. Leech caps are used on the trailing edge of the sail. Sold in packages of 9, includes batten tie lines.
    PRINDLE 16 ADJUSTABLE BATTEN LEECH CAPS (9)
    Tren-Tec
    Mini Cam Kit for Elliptical Surface Murrays Part# 001-0112 Mount a mini cam cleat, in any orientation, on almost any elliptical surface. Fits most elliptical surfaces: Hobie®, Nacra, Prindle masts and most others; Hobie and Prindle main beams, etc. You drill holes in the pad to suit your desired line/cleat orientation.
    MINI CAM KIT FOR ELLIPTICAL SURFACE
    Murrays Sports
    Traveler Ball Bearing H18 61852000 Murrays Part# 50-61850000 The Traveler Ball Bearing H18 is the stock Hobie 18 Main sheet traveler car ball beaing. This ball can be used in place of cylinder bearing #50-61860000 to bring the traveler back to what came stock on the Hobie 18. The difference between the traveler ball and the cylinder is that the balls allow the car to move faster but they wear down quicker. Hobie has stopped making the Hobie 18 traveler balls, but Murrays found their source and made more!
    Hobie 18 main traveler car parts list - 6180001, 8040301, 61870000, 61880000, 60190000, 8050311, 61842000, 8060121, 61810000, 61830000, 61852000, 8020431
    H-18 TRAVELER BALL BEARING
    Murrays Sports
    Roller Furling Drum Forestay Adjuster Murrays Part# 50-60830000 Hobie® factory replacement 13-hole adjuster for roller furler. Hobie Part# 60830000
    ROLLER FURLING DRUM FORESTAY ADJUSTER
    Hobie
    Eyestrap Wave Bridle Murrays Part# 50-38120011 ​Hobie® factory replacement eyestrap for Hobie Wave bridle.
    WAVE BRIDLE EYESTRAP
    Hobie
    Clevis Pin 1/4 X 3/4" Murrays Part# 56-4012 The Clevis Pin 1/4 X 3/4" is used on Prindle rudders, Nacra mast head sheave and as Nacra/Prindle shroud pin. Prindle Part# 4012
    CLEVIS PIN 1/4 X 3/4"
    NACRA
    3/16 X 1/2" Clevis Pin Murrays Part# 22-9801 Stainless steel clevis pin measures 3/16" diameter x 1/2" grip length (shoulder to the split ring hole). Prindle / Nacra Part# 9412 Compare to Hobie Cat® Part# 8020041
    CLEVIS PIN 3/16 x 1/2"
    Misc
    H-16 JIB BATTEN 44" 44" Murrays jib batten with a trentec batten cap.   Batten #3 in a Hobie jib batten set - 20400001 It is also use for the batten #8 on a Hobie 16 main sail batten set - 21000001
    H-16 JIB FIBERGLASS BATTEN 44"
    Murrays Sports
    Stainless steel cinch ring is also known as a hog ring. Use shock cord seizing pliers for a smooth installation; standard pliers can give a suitable cinch.
    CINCH RING 1/4" 6mm (X-0)
    Misc
    H-16 MAIN SHEET SPUN BRAID
    Robline
    Out of Stock
    Starboard-Lance Cleat Murrays Part# 007-359S The Lance Cleat - Starboard utilizes a single rugged aluminum alloy cam mounted vertically in a black molded frame. The rope slides in sideways and runs freely thru the fairlead, which has a colored roller incorporated in the top for easier sheeting and identification. Ideal for use in confined spaces. For use with 3/16 to 1/4″ line. The base is 22mm x 30mm.
    STARBOARD-LANCE CLEAT
    RWO
    Recently viewed