All Sailing Parts

1789 products

    1789 products
    Rudder Pin Nacra, Prindle and H21 Stainless Steel Murrays Part# 001-5273 Long-wearing, weight-saving, hollow stainless rudder pins with strong, .065" wall provide reduced wear and the best long-term fit. These rudder pins measure 3/8" x 10-1/4" end-to-end with a hole at each end. They will fit Nacra, Prindle and Hobie® 21. Cotter pins are included. These pins are a replacement for Hobie® factory item #40880011 (sold individually). Sold in pairs
    RUDDER PIN NAC/PRIN/H-21 (SS)
    Murrays Sports
    RUDDER PINS H-14/16 PR (ALUM)
    Murrays Sports
    UPPER GUDGEON H14/16
    Murrays Sports
    The Hobie Baby Bob Mast Float is designed to offer the safety and security of mast head flotation with minimized drag through the air, the Baby Bob is fixed in position to the mast head with the included mounting hardware. The Baby Bob is standard on all Hobie Waves This float will also fit the Getaway and Hobie 16 with or without CompTip. Some drilling may be necessary. The larger Mama Bob (#07-30119) is also an option for most Hobies. The Baby Bob Mast Float displaces 32 pounds of water, is 20" long x 1
    MAST FLOAT WAVE BABY BOB
    Hobie
    Out of Stock
    Harken Sail Chafe Protector Murrays Part# 28-0285 Harken's Sail Chafe Protector Set replaces the diamond wire rollers to protect the jib from chafing on the diamond wire spreader. The split rollers are pre-drilled to fit up to 3/16" wire. Each 2-3/4"-diameter (70mm) protector has two pieces that snap together for easy installation. Used on Hobie 18, Hobie 20, Prindle 18.2, Prindle 19, Nacra 15, 17, 18, Inter 20, F18
    HARKEN SAIL CHAFE PROTECTOR (2)
    Harken
    Harken 1/4" Torlon Ball Bearing-21 Balls Murrays Part# 28-0177 1/4" Torlon replacement ball bearings fit Harken 158, 159, 172, 210, 212, 214, 215, 249, 440 and 441. A bearing loader, #28-HSB8 (sold separately), is required for installation. Sold in packages of 21
    HARKEN 1/4" TORLON BALL BEARING (21)
    Harken
    H-16 UPPER FORESTAY 5/32 BARE Murrays PN 002-0235-00 Upper forestay for The Hobie® 16 is constructed of 7x19 - 5/32" bare wire to factory specifications. Compare to Hobie Cat® #20810011. This part is used as part of the classic halyard/ forestay configuration and it holds the stainless pulley that the jib halyard cable attaches to. This will also work to hold your Aussie halyard block assembly.
    H-16 UPPER FORESTAY 5/32" BARE WIRE
    Murrays Sports
    Contoured Spacers (Plastic)
    Tiller Connection Kit Murrays Part# 001-2061 The Murrays Tiller Connection Kit assures consistent rudder alignment through the full rudder sweep. Spring-loaded half balls and contoured spacers take the slop out of the tiller-to-crossbar connection on Hobie Cats. Racing class legal. Each kit contains 2 connectors to join the tiller crossbar to the tiller arms. Compare to Hobie Cat® #3052. Applications:; Hobie 14, 16, 17, 18, 18SX
    CONTOURED SPACER (PLASTIC)
    Murrays Sports
    CLEVIS PIN 3/16 X 1/2
    Misc
    H-16 TRAPEZE WIRE SET The Murrays H-16 Trapeze Wire Set is available in 2 colors White and Black PVC Coated 316 stainless steel wire.  Available in 2 Sizes: "Single - 2 handles", which includes one handle per side of the boat and "Double - 4 handles" which includes 2 handles per side of the boat. Each pair is single continuous 3/32″ (1×19) coated wire with two handles for trapezing. A single thimble at the top eliminates clutter. Murrays Hobie 16 Trap Wires are 16′ 8″ Pull to Pull
    H-16 TRAPEZE WIRE SET
    Murrays Sports
    POWERSTICK TELESCOPING CARBON TILLER 62-115" - YOKE STYLE
    Murrays Sports
    BOOM CLAMP H18
    Murrays Sports
    Quick-Release Pin Detent 1/4 X 1-1/2 Murrays Part# 18-4D150 The Quick-Release Pin Detent 1/4 X 1-1/2 is an economical, quick connection for Hobie 16 mast step pin. A spring-loaded ball exerts sufficient pressure to help avoid accidental release. Measurements are 1/4″ diameter x 1-1/2″ maximum grip length (distance from the shoulder to the locking ball bearings).
    QR PIN DETENT 1/4 X 1.5
    Misc
    RUDDER UPPER ROLLER PRINDLE
    Murrays Sports
    RUDDER LOCKING BOLT PRINDLE
    Murrays Sports
    Ronstan Mast HD Base Sheave Nacra, Prindle18/19 Prindle Mast Head Sheave, Nacra Base Murrays Part# 56-6804 Replacement sheave for mast base on Prindle 15, 18, 18.2, 19 and Nacra 2003 and later mast head. Sheave measures 1-1/8" diameter x 3/8" wide. Please note that this item replaces #6803 that is no longer available.
    RONSTAN MAST HD BASE SHEAVE NACRA, PRINDLE 18/19
    Ronstan
    Ronstan Halyard Shackle, 1/4" Pin Murrays Part# 21-1033 The Ronstan Halyard Shackle with Twist Pin's main advantage is that you cant loose any of it once its attached. The top pin holds it on and the bottom pin dose not come out. Never loose your shackle pins again! The 1/4" Halyard Shackle with Twist Pin is used in the following Murrays Products: 02-4383-50 N-5.5SL Jib Halyard w/Shackle
    RONSTAN HALYARD SHACKLE, 1/4" PIN
    Ronstan
    HALYARD POUCH 5"X9" ASST COLOR
    Murrays Sports
    Harken 29mm Clew Block Murrays Part# 28-0371 Harken's 29mm Carbo block assembly is designed to be sewn onto the clew of a sail. It can be used to replace the jib clew block on Hobie® 14 and 16. Specifications: 330 lb. SWL; 1000 lb. breaking strength; 5/16" maximum line diameter.  On Hobie® 14 and 16, attach with #21-1032 twist pin halyard shackle. Harken Part# 371
    HARKEN 29MM CLEW BLOCK
    Harken
    MYLAR SAIL REPAIR 2"x10' CLEAR
    Misc
    HULL CRADLE: H-17/18 BOW
    Murrays Sports
    QR PIN DETENT 1/4 X 3
    Misc
    SPARE PARTS KIT: PRINDLE
    Murrays Sports
    Cat Bag 4" Murrays Part# 001-1169 The Cat Bag provides handy storage inside a deck port! The sturdy nylon bag with plastic collars hangs inside 4" access port on a molded shoulder. 12" deep. Hobie Cat® uses #5402 for this item.
    PORT CAT BAG 4"
    Misc
    GETAWAY WING PIN/EZ LOC RUDDER LANYARD  Replacement lanyard for Hobie Getaway Wing Pins and EZ Loc rudder up pin kit. Hobie part number 50314001
    GETAWAY WING PIN/EZ LOC RUDDER LANYARD
    Hobie
    TRAVELER BALL BEARING H18 Ea
    Murrays Sports
    TILLER END CAP HOBIE
    Hobie
    Hobie 20-style factory tiller connector post. Part of the Hobie 1953 tiller connection system. Hobie part number 40530000 and 40530001
    TILLER CONNECTOR ROD H20-STYLE
    Hobie
    NUT SQUARE 10-32
    Hobie
    MAST BEARING H18
    Hobie
    Out of Stock
    MAST BASE H14/WAVE BK
    Hobie
    SAIL FEEDER KIT by HOBIE
    Hobie
    DIAMOND WIRE H18 (COMPLETE)
    Hobie
    EZ LOC UPPER PINTLE
    Hobie
    Eyestrap Wave Bridle Murrays Part# 50-38120011 ​Hobie® factory replacement eyestrap for Hobie Wave bridle.
    EYESTRAP WAVE BRIDLE
    Hobie
    Wave Shroud 1/8" Black Wire Murrays Part# 002-0804-02 Single black shroud (sidestay) for Hobie® Wave is constructed to factory specifications. Compare to Hobie Part# 39790001
    WAVE SHROUD 1/8" BLACK WIRE
    Murrays Sports
    RIVET MSP 6-10 3/16 X 5/8 PH
    Misc
    Rivet CCP 6-4 (3/16 X 1/4) Murrays Part# 19-5031 Stainless steel 3/16" x 1/4" rounded pan head rivet. Compare to Hobie Cat® #8010181. This is a common rivet used on many extrusions. Hobie, Nacra, Prindle masts and booms. Pair with a rivet casing to seal the rivet hole when used on masts. All Hobie mast hounds, tangs, heads, and cheek blocks. Used with Hobie Getaway Bow Spreader Plates Used on Hobie Getaway FWD and REAR Crossbar Stop Plates
    RIVET CCP 6-4 (3/16 X 1/4)
    Misc
    Murrays 57mm Carbo 6:1 Mainsheet System Murrays Part# 28-61 The Murrays Harken 57mm Carbo 6:1 Mainsheet System is an improved low profile mainsheet system for Hobie 16.  By attaching a fairlead to the back side of the cleat mount the Murrays system does not need a becket on the lower block which makes the system more compact and gives sailors the ability to sheet in farther and or rake the mast back farther before having the mainsheet bottom out and go block to block.
    MURRAYS 57MM CARBO 6:1 MAINSHEET SYSTEM
    Harken
    MAIN HALYARD HOOK: H-14/16
    Hobie