All Sailing Parts

All Sailing Parts

2262 products

    Everything Nacra, Prindle, Hobie and a few more fun odds and ends.

    2262 products
    Nut Stainless Steel 1/4-20" Centerlock Murrays Part# 50-8050121
    NUT STAINLESS STEEL 1/4-20" CENTERLOCK
    Hobie
    GETAWAY WING LEG ASSEMBLY
    Hobie
    Out of Stock
    Wave Shroud with Hook Murrays Part# 50-38790001 Hobie® factory replacement shroud with hook for Wave.
    WAVE SHROUD WITH HOOK
    Hobie
    WAVE LOWER MAST
    Hobie
    Out of Stock
    Wave Batten Set Murrays Part# 50-38016001 Complete batten set for the Hobie Wave sailboat. Includes battens 1-5 in the correct lengths for your Wave mainsail.
    WAVE BATTEN SET
    Hobie
    Washer Flat 1/4 x 5/8" Murrays Part# 50-8080521 Hobie® factory replacement 5/8" x 9/32" flat washer is used on Hobie 18 mast step assembly. Hobie Part# 8080521
    WASHER FLAT 1/4 X 5/8"
    Hobie
    Traveler Spacer H18 Murrays Part# 50-61880000 Hobie® factory replacement spacer for Hobie® 18 main traveler car.
    H-18 TRAVELER SPACER
    Hobie
    Out of Stock
    Traveler Adjustment Indicator Decal Murrays Part# 50-40210001 Hobie® factory traveler adjustment indicator decal for Hobie 20. Hobie Part# 40210001
    Traveler Adjustment Indicator Decal Murrays Part# 50-40210001 Hobie® factory traveler adjustment indicator decal for Hobie 20. Hobie Part# 40210001
    TRAVELER ADJUSTMENT INDICATOR DECAL
    Hobie
    Out of Stock
    H20 Jib Halyard Swivel Toggle Murrays Part# 50-41880001 Hobie® factory replacement jib halyard toggle for Hobie® 20 Miracle.
    H-20 JIB HALYARD SWIVEL TOGGLE
    Hobie
    Out of Stock
    Tiller End Cap with Pin Murrays Part# 50-37561203​ Hobie® factory replacement tiller end cap with pin for '07 tiller connector. Fits Hobie Getaway. Hobie Part# 37561203
    TILLER END CAP WITH PIN
    Hobie
    Getaway Tiller Arm Murrays Part# 50-37321111 Hobie® factory replacement tiller arm for Getaway pre-EZ Loc system. This does not fit the EZ Loc Rudder System Hobie Part# 37321111
    GETAWAY TILLER ARM
    Hobie
    H18 Spreader Brace Murrays Part# 50-61430000 Hobie® factory replacement spreader brace for Hobie® 18.
    H-18 SPREADER BRACE
    Hobie
    Out of Stock
    H18 Spreader Arm Murrays Part# 50-61420000 Hobie® factory replacement spreader arm for Hobie® 18.
    H-18 SPREADER ARM
    Hobie
    Screw #14 X 3/4 PHSMS Murrays Part3 50-8031891 Hobie® factory replacement #14 x 3/4" pan head self-tapping sheet metal screw with Phillips head. Hobie Part# 8031891
    SCREW #14 X 3/4" PHMS
    Hobie
    H14 Mainsail (White) Murrays Part# 50-10990010 White Mainsail for the Hobie 14, made by Hobie Cat. 6 oz heavy duty dacron sail cloth for long term durability. Comes with sail number preinstalled. Fits all Hobie 14 sailboats.
    H-14 MAINSAIL (WHITE)
    Hobie
    Out of Stock
    H14/16 Rudder Casting Upper Left Black Murrays Part# 50-10352011 Hobie® factory replacement upper left rudder casting for Hobie® 14 or 16. Requires two 6-6 rivets (item #19-5032) and one 6-8 rivet (item #19-5033) to install tiller tube.
    H-14/16 UPPER LEFT RUDDER CASTING-BLACK
    Hobie
    Rudder Casting Only Left Prindle Murrays Part# 56-4001 Left rudder casting for all Prindles does not include hardware. The remaining stock of clear anodized castings have not had their tiller arm hole machined and will likely not fit without additional machining. Nacra Part# 30412
    PRINDLE LEFT RUDDER CASTING
    Misc
    Out of Stock
    H17/18/20 Lower Rudder Casting Murrays Part# 50-50322001 Hobie® factory replacement lower rudder casting for Hobie® 17, 18, 20, Getaway and Wave. This casting does not fit Hobie® 14 or 16.
    H-17/18/20 LOWER RUDDER CASTING
    Hobie
    H17/18/20 Upper Right Rudder Casting Murrays Part# 50-50341001 Hobie® factory replacement upper right rudder casting for Hobie® 17, 18 or 20. Use four 6-8 rivets (#19-5033) for installation. Hobie Part# 50341001
    H-17/18/20 UPPER RIGHT RUDDER CASTING
    Hobie
    H18 Roller Furler Yoke Assembly Murrays Part# 50-61980000 Hobie® factory replacement yoke assembly for roller furler. Hobie Part# 61980000
    H-18 ROLLER FURLER YOKE ASSEMBLY
    Hobie
    Rivet 3/16 x 5/16 Aluminum Murrays Part# 50-8010071 Hobie® factory aluminum 3/16" x 5/16" rivet. A rivet tool is required for installation.
    RIVET 3/16X 5/16 ALUMINUM
    Hobie
    Out of Stock
    Rear Inboard Support Casting Kit Murrays Part# 50-61040001 Hobie® factory rear inboard support casting kit. Requires one per side. Hobie Part# 61040001
    REAR INBOARD SUPPORT CASTING KIT
    Hobie
    Rudder Lock Release Strap Murrays Part# 56-4010 This is one of two plates used in each rudder assembly on a Prindle beach cat. This is part of the internal assembly that moves up and down as part of the rudder pull up/down system. The Prindle Rudder Lock Release Strap is works on all Prindles. Nacra sailing factory item# 30415 Prindle Part# 4010
    PRINDLE RUDDER LOCK RELEASE STRAP
    NACRA
    Out of Stock
    Nut Nylock Lo-Pro 1/4-20 Murrays Part# 50-8050101 Hobie® factory replacement low profile 1/4-20 nylock nut. Used on Hobie 14 and 16 gooseneck assembly. Hobie Part# 8050101
    NUT NYLOCK LOW PROFILE 1/4-20"
    Hobie
    Out of Stock
    Nut Nylock 3/8-24 Murrays Part# 50-8050511 Replacement 3/8-24 nylock nut is used on Hobie® 14, 16 and 18 dolphin striker rods, as well as Hobie® 17 inboard support. Hobie Part# 8050511
    NUT NYLOCK 3/8-24"
    Hobie
    Nut 10-32 Nylock Low Profile Murrays Part# 50-8050211 Hobie factory low-profile Nylock 10-32 nut as used on EZ-Loc rudder assembly. Hobie Part# 8050211
    NUT 10-32 NYLOCK LOW PROFILE
    Hobie
    Out of Stock
    Prindle 15/16/18 mast step casting
    PRINDLE 15/16/18 MAST STEP CASTING
    Misc
    Out of Stock
    H17/20/Tiger Mast Base Murrays Part# 50-50416011 Hobie® factory replacement black mast base for Hobie® 17, 20 or Tiger. Use two 6-6 rivets (#19-5032) for installation.
    H-17/20/TIGER MAST BASE
    Hobie
    Out of Stock
    Hobie Rudder Blade - White Nylon Murrays Part# 50-20493000 The Hobie Rudder Blade - White Nylon is a solid molded white nylon rudder blade for use on virtually all Hobie Catamarans. Hobie factory nylon rudder blades are stock on Hobie 14, 16, 17, 18, 20 and Waves with pre-EZ Loc rudder systems. Hobie rudders are sold undrilled and we recommend that you use your old rudder as a template to drill your new rudder. Hobie Part# 20493000
    HOBIE RUDDER BLADE - WHITE NYLON
    Hobie
    Getaway EZ Loc Tiller Crossbar Murrays Part# 50-37524001 Newest 4th edition Hobie Getaway crossbar.
    GETAWAY EZ LOC TILLER CROSSBAR
    Hobie
    Out of Stock
    H18 Comptip Assembly Murrays Part# 50-60611100 Hobie® factory Hobie 18 CompTip Assembly for Hobie 18 mast. A CompTip is the upper section of Hobie mast built in or after 1968. Fiberglass and non-conductive, it is designed to prevent electrocution by contact with a high power line.
    H-18 COMPTIP ASSEMBLY
    Hobie
    Out of Stock
    H20/21/ Super Cruiser Shroud Tang Murrays Part# 50-30690001
    H-20/21/SC SHROUD TANG
    Hobie
    Out of Stock
    H18 Mesh Trampoline-Black Murrays Part# 50-60970055 The gold standard for Hobie 18 trampolines, this black mesh trampoline features a heavy duty fabric, pockets, and reinforced grommets. Hobie Part# 60970055
    HOBIE 18 MESH TRAMPOLINE-BLACK
    Hobie
    Out of Stock
    H18 Aft Crossbar Extrusion-Black Murrays Part# 50-60191211 Hobie® factory replacement H18 Black Aft Crossbar Extrusion.
    H-18 AFT CROSSBAR EXTRUSION-BLACK
    Hobie
    H16 Forward Crossbar with Mast Step Murrays Part# 50-25131910 This is the current production front Crossbar for a Hobie 16. It includes the integrated traveler track and the updated mast step. Hobie® factory replacement forward crossbar for 1994 or later Hobie 16's with integrated track. Hobie Part# 25131910
    H-16 FROWARD CROSSBAR WITH MAST STEP
    Hobie
    GETAWAY MAST HEAD SHEAVE Replacement Hobie Getaway mast head sheave. Hobie part number 37611001
    GETAWAY MASTHEAD SHEAVE
    Hobie
    PRINDLE 15, 16, 18 DOLPHIN STRIKER ROD
    NACRA
    Out of Stock
    Dolphin Striker Post Sleeve Murrays Part# 50-61140000 Hobie® factory replacement dolphin striker post sleeve for Hobie 18 Hobie Part# 61140000
    H-18 DOLPHIN STRIKER POST SLEEVE
    Hobie
    H18 Diamond Spreader Tang Murrays Part# 50-61410000 Hobie® factory replacement diamond spreader tang for Hobie® 18.
    H-18 DIAMOND SPREADER TANG
    Hobie
    Sale
    H14 Comp-tip Assembly Murrays Part# 50-10582100 Hobie® factory CompTip assembly for Hobie 14.
    H-14 COMP-TIP ASSEMBLY NOS
    Hobie
    Save $319
    Recently viewed