All Sailing Parts

All Sailing Parts

2266 products

Everything Nacra, Prindle, Hobie and a few more fun odds and ends.

2266 products

Sort

H18 Shroud Anchor Plate Kit

Murrays Part# 50-64100001

The Shroud Anchor Plate Kit H18 is the Hobie® factory replacement shroud anchor plate kit for Hobie 18.

Applications:

This kit is also used to re-enforce the crossbar bolts on Hobie 18s with wings or the lighter H18 boats that were built from 1984-1988.

H-18 SHROUD ANCHOR PLATE KIT

Screw 1/4-20 X 3/8 RHMS-P

Murrays Part# 50-8030711

Hobie® factory replacement 1/4-20 x 3/8" stainless steel round head machine screw with Phillips head. Use two on Hobie® 20 jib car.

Hobie Part# 8030711

SCREW 1/4-20 X 3/8" RHMS-P

Screw #14 X 3/4 PHSMS

Murrays Part3 50-8031891

Hobie® factory replacement #14 x 3/4" pan head self-tapping sheet metal screw with Phillips head.

Hobie Part# 8031891

SCREW #14 X 3/4" PHMS

H14/16 Rudder Casting Upper Left Black

Murrays Part# 50-10352011

Hobie® factory replacement upper left rudder casting for Hobie® 14 or 16. Requires two 6-6 rivets (item #19-5032) and one 6-8 rivet (item #19-5033) to install tiller tube.

H-14/16 UPPER LEFT RUDDER CASTING-BLACK

Rudder Casting Only Left Prindle

Murrays Part# 56-4001

Left rudder casting for all Prindles does not include hardware. The remaining stock of clear anodized castings have not had their tiller arm hole machined and will likely not fit without additional machining.

Nacra Part# 30412

PRINDLE LEFT RUDDER CASTING

H17/18/20 Lower Rudder Casting

Murrays Part# 50-50322001

Hobie® factory replacement lower rudder casting for Hobie® 17, 18, 20, Getaway and Wave. This casting does not fit Hobie® 14 or 16.

H-17/18/20 LOWER RUDDER CASTING

H17/18/20 Upper Right Rudder Casting

Murrays Part# 50-50341001

Hobie® factory replacement upper right rudder casting for Hobie® 17, 18 or 20. Use four 6-8 rivets (#19-5033) for installation.
Hobie Part# 50341001

H-17/18/20 UPPER RIGHT RUDDER CASTING

Rivet 3/16 x 5/16 Aluminum
Murrays Part# 50-8010071
Hobie® factory aluminum 3/16" x 5/16" rivet. A rivet tool is required for installation.

RIVET 3/16X 5/16 ALUMINUM

Rear Inboard Support Casting Kit

Murrays Part# 50-61040001

Hobie® factory rear inboard support casting kit. Requires one per side.

Hobie Part# 61040001

REAR INBOARD SUPPORT CASTING KIT

Rudder Lock Release Strap

Murrays Part# 56-4010

This is one of two plates used in each rudder assembly on a Prindle beach cat. This is part of the internal assembly that moves up and down as part of the rudder pull up/down system. The Prindle Rudder Lock Release Strap is works on all Prindles.

Nacra sailing factory item# 30415

Prindle Part# 4010

PRINDLE RUDDER LOCK RELEASE STRAP

NUT NYLOCK LOW PROFILE 1/4-20"

Nut Nylock 3/8-24

Murrays Part# 50-8050511

Replacement 3/8-24 nylock nut is used on Hobie® 14, 16 and 18 dolphin striker rods, as well as Hobie® 17 inboard support.

Hobie Part# 8050511

NUT NYLOCK 3/8-24"

NUT 10-32 NYLOCK LOW PROFILE

Prindle 15/16/18 mast step casting

PRINDLE 15/16/18 MAST STEP CASTING

H17/18 Mast Foam Plug

Murrays Part# 50-60060000

Hobie® factory replacement foam plug for Hobie® 17 or 18 mast.

H-17/18 MAST FOAM PLUG

H17/20/Tiger Mast Base

Murrays Part# 50-50416011

Hobie® factory replacement black mast base for Hobie® 17, 20 or Tiger. Use two 6-6 rivets (#19-5032) for installation.

H-17/20/TIGER MAST BASE

Main Traveler Track (Deep)

Murrays Part# 50-50252021

This Hobie® factory replacement deep traveler track for Hobie® 17 can also be cut to fit Hobie 14 or 16. Use 18 #19-5024 6-6 countersunk rivets for installation on Hobie 17.

MAIN TRAVELER TRACK (DEEP)

Hobie Rudder Blade - White Nylon

Murrays Part# 50-20493000

The Hobie Rudder Blade - White Nylon is a solid molded white nylon rudder blade for use on virtually all Hobie Catamarans. Hobie factory nylon rudder blades are stock on Hobie 14, 16, 17, 18, 20 and Waves with pre-EZ Loc rudder systems. Hobie rudders are sold undrilled and we recommend that you use your old rudder as a template to drill your new rudder.

Hobie Part# 20493000

HOBIE RUDDER BLADE - WHITE NYLON

Getaway EZ Loc Tiller Crossbar

Murrays Part# 50-37524001

Newest 4th edition Hobie Getaway crossbar.

GETAWAY EZ LOC TILLER CROSSBAR

H18 Comptip Assembly

Murrays Part# 50-60611100

Hobie® factory Hobie 18 CompTip Assembly for Hobie 18 mast. A CompTip is the upper section of Hobie mast built in or after 1968. Fiberglass and non-conductive, it is designed to prevent electrocution by contact with a high power line.

H-18 COMPTIP ASSEMBLY

H17 Aft Crossbar Extrusion

Murrays Part# 50-50261001

Hobie® factory replacement aft crossbar extrusion for Hobie 17.

H-17 AFT CROSSBAR EXTRUSION

H20/21/ Super Cruiser Shroud Tang

Murrays Part# 50-30690001

H-20/21/SC SHROUD TANG

H18 Mesh Trampoline-Black

Murrays Part# 50-60970055

The gold standard for Hobie 18 trampolines, this black mesh trampoline features a heavy duty fabric, pockets, and reinforced grommets.

Hobie Part# 60970055

HOBIE 18 MESH TRAMPOLINE-BLACK

H18 Aft Crossbar Extrusion-Black

Murrays Part# 50-60191211

Hobie® factory replacement H18 Black Aft Crossbar Extrusion.

H-18 AFT CROSSBAR EXTRUSION-BLACK

H16 Forward Crossbar with Mast Step

Murrays Part# 50-25131910

This is the current production front Crossbar for a Hobie 16. It includes the integrated traveler track and the updated mast step. Hobie® factory replacement forward crossbar for 1994 or later Hobie 16's with integrated track.

Hobie Part# 25131910

H-16 FROWARD CROSSBAR WITH MAST STEP

GETAWAY MAST HEAD SHEAVE

Replacement Hobie Getaway mast head sheave.

Hobie part number 37611001

GETAWAY MASTHEAD SHEAVE

Dolphin Striker Post Sleeve
Murrays Part# 50-61140000
Hobie® factory replacement dolphin striker post sleeve for Hobie 18
Hobie Part# 61140000

H-18 DOLPHIN STRIKER POST SLEEVE

H18 Diamond Spreader Tang

Murrays Part# 50-61410000

Hobie® factory replacement diamond spreader tang for Hobie® 18.

H-18 DIAMOND SPREADER TANG

H14 Comp-tip Assembly

Murrays Part# 50-10582100

Hobie® factory CompTip assembly for Hobie 14.

H-14 COMP-TIP ASSEMBLY NOS

Boom End Cap H18 Forward
Murrays part# 50-60751010
Hobie® factory replacement forward end cap for Hobie 18 boom.

H-18 FORWARD BOOM END CAP

Bolt Socket Head 3/8-16 X 3.75"
Murrays Part# 50-8040561
Hobie® factory replacement 3/8-16 x 3.75" socket head bolt.
Applications:
Hobie 18 inboard front crossbar

BOLT SOC HEAD 3/8-16 X 3.75"

Bolt 5/16 X 18 X3.5"

Murrays Part# 50-8040371

Hobie® factory replacement 5/16-18 x 3-7/16" bolt. Pylon bolt for Hobie® 14 and older 16 (1994 and prior; starting in 1995, boats had newer style castings/pylons).

Hobie Part# 8040371

BOLT 5/16 X 18 X3.5"

Bolt 3/8-16 X 5"

50-8040061

Hobie® factory 3/8-16 x 5" bolt is used on Hobie 20 Miracle front crossbar.

Hobie Part# 8040061

BOLT 3/8-16 X 5"

Bolt 3/8-16 X 2"

Murrays Part# 50-8040501

Replacement stainless steel 3/8-16 x 2" bolt is used on Hobie® 18 front and rear crossbars.

Hobie Part# 8040501

BOLT 3/8-16 X 2"

H18 Jib Furler Bearing (Race)

Murrays Part# 50-61920000

Hobie® factory replacement bearing race for Hobie roller furler drum.

Hobie Part# 61920000

H-18 JIB FURLER BEARING (RACE)

Backrest End Cap Left Front Right Rear Getaway
Murrays Part# 50-37660031
Hobie® factory replacement end cap casting for Getaway backrest. Left front/right rear

GETAWAY WIND END CAP-FRONT LEFT, REAR RIGHT

SINGLE SHANK BALL STOP 3/32"

WAVE/GETAWAY TILLER CONNECTION KIT

Wave Club 3-Piece Mesh Trampoline-Black

The Murrays Hobie Wave Club 3-Piece Black Mesh Trampoline is not Hobie Class-legal for racing. Polypropylene mesh is the ideal material for beach cat tramps because it is light, strong and comfortable with very good UV resistance, plus it allows water to drain, so you won't be sitting in a puddle.

Features: A main halyard pocket and hiking straps.

Order 43' of 1/4" low-stretch line for lacing (21' for center and two 11' pieces aft).

Compare to Hobie Part#

WAVE CLUB 3-PIECE MESH TRAMPOLINE-BLACK

Bolt Hex Head 1/2-13 X 3.75 (Stainless Steel)

Murrays Part# 19-2240

Stainless steel hex head bolt for older Hobie® 16 pylon.

Compare to Hobie® Part#50-8040731

BOLT HEX HEAD 1/2-13 X 3.75" (SS)

Previous 1 … 39 40 41 42 43 … 57 Next

Recently viewed

All Sailing Parts