All Sailing Parts

All Sailing Parts

2261 products

    Everything Nacra, Prindle, Hobie and a few more fun odds and ends.

    2261 products
    Out of Stock
    Carbon Key Hole Buckle Murrays Part# 001-0311 The safety-minded Carbon Key-Hole buckle system offers many advantages over the traditional hook design. Its low profile design is less likely to get hooked unintentionally and the system will stay hooked until purposefully removed. A low profile means much easier reboarding and less likelihood of scratching gel coat, point loading or damaging a hull. Ball-end trapeze rings are lighter and less dangerous than stainless dogbones or trapeze rings.
    CARBON KEY HOLE BUCKLE
    Murrays Sports
    3-Hole Adapter Pad Murrays Part# 001-0109 Our 3-hole adapter pad fits a Hobie® or Prindle elliptical crossbar. Polyurethane bases provide flat mounting surfaces for mast rotation control cleats, barberhauler cleats, or Hobie® 16 jib trim cleats. Use to mount small Ronstan C-Cleat (#21-5000) or Ronstan Small or Large Swivel 360 Cleats (#21-0067 or #21-0058). Each base can be port or starboard, depending on how cleats are installed.
    3-HOLE ADAPTER PAD
    Murrays Sports
    Plug for Aluminum Stick Murrays Part# 001-0064 15/16"Outer Dimension plug fits the Murrays Aluminum Hiking Stick.
    PLUG FOR ALUMINUM STICK
    Murrays Sports
    N-5.0 BRIDLE 5/32- BLACK
    Murrays Sports
    Screw 1/4/20x1.25" PHPMS Murrays Part# 50-8032061 Rear Hatch Screw for Hobie Bravo. Hobie Part# 8032061
    SCREW 1/4-20x1.25" PHPMS
    Hobie
    Out of Stock
    8" Twist-N-Seal Hatch  Murrays Part# 50-71702011 Twist-n-seal hatches have a better seal. The lids also hinge open, so you never lose the lid. Designed with a cork-screw-like mechanism for closure, a simple twist of the handle opens or closes the hatch. As the screw pulls down the hatch, you get a tight seal on the Ring.
    8" TWIST-N-SEAL HATCH
    Hobie
    Out of Stock
    Hobie Getaway EZ Loc Tiller Arm Murrays Part# 50-37382011 Replacement tiller arm for Hobie Getaway sailboat with EZ Loc style rudders. Hobie Part# 37382011
    HOBIE GETAWAY EZ LOC TILLER ARM
    Hobie
    Screw 3/8-16 x 4" PHMS-P Murrays Part# 50-8040600 This screw is for holding the wing side leg brace. Hobie Part# 8040600
    SCREW 3/8-16 x 4" PHMS-P
    Hobie
    Screw #10 x 1/2 PHSMS-P Murrays Part# 50-8031151 Hobie Part# 8031151
    SCREW #10X1/2" PHSMS-P
    Hobie
    Getaway Mesh Trampoline 2001-16 Murrays Part# 50-37970055 The Hobie factory replacement Hobie Getaway Mesh Trampoline is heat welded for longevity. Class legal for Hobie racing.
    HOBIE GETAWAY 2001-16 MESH TRAMPOLINE-BLACK
    Hobie
    Hobie Getaway Wing Leg Bracket Murrays Part# 50-37661050 Trampoline wing leg bracket for Hobie Getaway. Hobie Part# 37661050
    GETAWAY WING LEG BRACKET
    Hobie
    Bolt Allen Head 5/16 18 X 1.5" (Stainless Steel) Murrays Part# 19-2229S Bolt Allen Head 5/16 - 18 X 1.5 (Stainless Steel) - replace hex head bolts used on Hobie 16, 17, 18, 20 Upper adjustable rudder castings. Limited space for Hex head requires thin walled 1/2" socket with 1/6" drive. Socket head bolt uses Allen head tool which is cheap, strong, and compact for on board storage and convenient adjustment.
    BOLT 5/16-18 X 1.5" (SS)
    Misc
    H20/21 Super Cruiser Compression Sleeve Murays Part# 50-31110001 This is the sleeve that goes over the dolphin striker inside the front crossbar of the H20. Hobie part# 31110001
    H20/21SC COMPRESSION SLEEVE
    Murrays Sports
    Hobie Main Traveler Track Access Plate Kit Murrays Part# 50-11810011 This kit has been discontinued by Hobie, but the plates are still available, so Murrays is producing the kits with the Hobie plates.
    HOBIE MAIN TRAVELER TRACK ACCESS PLATE KIT
    Hobie
    Out of Stock
    H20 Forward Outboard Sup Tube Murrays Part# 50-41150001
    H-20 FORWARD OUTBOARD SUP TUBE
    Hobie
    Out of Stock
    Bolt 5/16-18 x 2-3/4" HX HD Murrays Part# 50-8040391 EZ Loc upper rudder bolt for Hobie Bravo, Getaway and Wave  Hobie Part# 8040391
    BOLT 5/16-18 x 2-3/4" HX HD
    Hobie
    Out of Stock
    Wave Shroud with Hook Murrays Part# 50-38790001 Hobie® factory replacement shroud with hook for Wave.
    WAVE SHROUD WITH HOOK
    Hobie
    WAVE LOWER MAST
    Hobie
    Out of Stock
    Wave Batten Set Murrays Part# 50-38016001 Complete batten set for the Hobie Wave sailboat. Includes battens 1-5 in the correct lengths for your Wave mainsail.
    WAVE BATTEN SET
    Hobie
    Washer Flat 1/4 x 5/8" Murrays Part# 50-8080521 Hobie® factory replacement 5/8" x 9/32" flat washer is used on Hobie 18 mast step assembly. Hobie Part# 8080521
    WASHER FLAT 1/4 X 5/8"
    Hobie
    Hobie 8080581 Hobie factory replacement 3/8" lock washer is used on Hobie 18 front and rear inboard support castings.
    WASHER LOCK 3/8"
    Hobie
    Traveler Spacer H18 Murrays Part# 50-61880000 Hobie® factory replacement spacer for Hobie® 18 main traveler car.
    H-18 TRAVELER SPACER
    Hobie
    Out of Stock
    Traveler Adjustment Indicator Decal Murrays Part# 50-40210001 Hobie® factory traveler adjustment indicator decal for Hobie 20. Hobie Part# 40210001
    Traveler Adjustment Indicator Decal Murrays Part# 50-40210001 Hobie® factory traveler adjustment indicator decal for Hobie 20. Hobie Part# 40210001
    TRAVELER ADJUSTMENT INDICATOR DECAL
    Hobie
    Out of Stock
    H20 Jib Halyard Swivel Toggle Murrays Part# 50-41880001 Hobie® factory replacement jib halyard toggle for Hobie® 20 Miracle.
    H-20 JIB HALYARD SWIVEL TOGGLE
    Hobie
    Out of Stock
    Tiller End Cap with Pin Murrays Part# 50-37561203​ Hobie® factory replacement tiller end cap with pin for '07 tiller connector. Fits Hobie Getaway. Hobie Part# 37561203
    TILLER END CAP WITH PIN
    Hobie
    Getaway Tiller Arm Murrays Part# 50-37321111 Hobie® factory replacement tiller arm for Getaway pre-EZ Loc system. This does not fit the EZ Loc Rudder System Hobie Part# 37321111
    GETAWAY TILLER ARM
    Hobie
    H18 Spreader Brace Murrays Part# 50-61430000 Hobie® factory replacement spreader brace for Hobie® 18.
    H-18 SPREADER BRACE
    Hobie
    Out of Stock
    H18 Spreader Arm Murrays Part# 50-61420000 Hobie® factory replacement spreader arm for Hobie® 18.
    H-18 SPREADER ARM
    Hobie
    HOBIE JIB HALYARD BLOCK SHEAVE Murrays PN 50-61260000 Hobie® factory replacement sheave for jib halyard block. Used on Hobie 16s and 18s. Hobie part number 61260000 and 61260010
    HOBIE JIB HALYARD BLOCK SHEAVE
    Hobie
    Screw 8-32 X 3/8" THMS Roller Furler Drum Murrays Part# 50-8030501 Hobie® factory replacement 8-32 x 3/8" screw for roller furler drum. Hobie Part# 8030501
    SCREW 8-32X3/8" THMS
    Hobie
    Screw #14 X 3/4 PHSMS Murrays Part3 50-8031891 Hobie® factory replacement #14 x 3/4" pan head self-tapping sheet metal screw with Phillips head. Hobie Part# 8031891
    SCREW #14 X 3/4" PHMS
    Hobie
    H14 Mainsail (White) Murrays Part# 50-10990010 White Mainsail for the Hobie 14, made by Hobie Cat. 6 oz heavy duty dacron sail cloth for long term durability. Comes with sail number preinstalled. Fits all Hobie 14 sailboats.
    H-14 MAINSAIL (WHITE)
    Hobie
    Out of Stock
    H14/16 Rudder Casting Upper Left Black Murrays Part# 50-10352011 Hobie® factory replacement upper left rudder casting for Hobie® 14 or 16. Requires two 6-6 rivets (item #19-5032) and one 6-8 rivet (item #19-5033) to install tiller tube.
    H-14/16 UPPER LEFT RUDDER CASTING-BLACK
    Hobie
    H14/16 Rudder Cast Upper Right Black Murrays Part# 50-10362011 Hobie® factory replacement upper left rudder casting for Hobie® 14 or 16. Requires two 6-6 rivets (item #19-5032) and one 6-8 rivet (item #19-5033) to install tiller tube.
    H14/16 UPPER RIGHT RUDDER CASTING-BLACK
    Hobie
    Out of Stock
    Rudder Casting Only Left Prindle Murrays Part# 56-4001 Left rudder casting for all Prindles does not include hardware. The remaining stock of clear anodized castings have not had their tiller arm hole machined and will likely not fit without additional machining. Nacra Part# 30412
    PRINDLE LEFT RUDDER CASTING
    Misc
    Out of Stock
    H17/18/20 Lower Rudder Casting Murrays Part# 50-50322001 Hobie® factory replacement lower rudder casting for Hobie® 17, 18, 20, Getaway and Wave. This casting does not fit Hobie® 14 or 16.
    H-17/18/20 LOWER RUDDER CASTING
    Hobie
    H17/18/20 Upper Right Rudder Casting Murrays Part# 50-50341001 Hobie® factory replacement upper right rudder casting for Hobie® 17, 18 or 20. Use four 6-8 rivets (#19-5033) for installation. Hobie Part# 50341001
    H-17/18/20 UPPER RIGHT RUDDER CASTING
    Hobie
    H18 Roller Furler Yoke Assembly Murrays Part# 50-61980000 Hobie® factory replacement yoke assembly for roller furler. Hobie Part# 61980000
    H-18 ROLLER FURLER YOKE ASSEMBLY
    Hobie
    Rivet 3/16 x 5/16 Aluminum Murrays Part# 50-8010071 Hobie® factory aluminum 3/16" x 5/16" rivet. A rivet tool is required for installation.
    RIVET 3/16X 5/16 ALUMINUM
    Hobie
    Out of Stock
    Rear Inboard Support Casting Kit Murrays Part# 50-61040001 Hobie® factory rear inboard support casting kit. Requires one per side. Hobie Part# 61040001
    REAR INBOARD SUPPORT CASTING KIT
    Hobie
    Recently viewed