All Sailing Parts

All Sailing Parts

2266 products

Everything Nacra, Prindle, Hobie and a few more fun odds and ends.

2266 products

Sort

Harken 22mm Triple Becket Block-Cam Cleat

Murrays Part# 28-0231

Harken ball bearing micro triple block with becket and cam has free-rolling Delrin® ball bearings. Sheaves are UV-stabilized with carbon-black additive for maximum protection. Stainless steel side plates give strength. Harken's low-friction micro blocks are compact and lightweight, with fast trim and release under high or low loads.

HARKEN 22MM TRIPLE BECKET BLOCK-CAM CLEAT

Harken Triple Micro Block
Murrays Part# 28-0228
Harken 22mm ball bearing micro triple block with stainless side plates.
Specifications:
1/4" maximum line capacity
500 lb. SWL
1200 lb. breaking strength
7/8" sheave
2" long
Harken Part# 228
Hobie part# H228

HARKEN TRIPLE MICRO BLOCK

HARKEN 22MM END STOPS HIGH-BEAM

Harken 29mm Bullet Block - Swivel

Murrays Part# 28-0166

Medium-size Harken double bullet block with swivel has Delrin ball bearings. The low-friction bullet block is compact and lightweight, with fast trim and release under high or low loads. Free-rolling Delrin® ball bearings. Sheave and sideplates are UV-stabilized with carbon-black additive for maximum protection.

HARKEN 29MM BULLET BLOCK-SWIVEL

Harken Standard Furling Swivel-3mm Luff Wire

Murrays Part# 28-0164

One of the simplest, strongest and least expensive roller furling swivels for roller furling jibs. SWL of 950 lbs.; distance between pins is 2-1/2".

Harken Part# 164

HARKEN STANDARD FURLING SWIVEL-3MM LUFF WIRE

Neoprene sleeve bottle holder with adjustable webbing straps at each end to fit around different circumferences of tube. Can be attached to parts in the boat to store drinks when sailing. The bottle holder features an oval hole to be able to slide the bottle in with one hand. Can fit up most bottle up to 1L in size.

ROOSTER JOEY BOTTLE HOLDER

Wave EZ Loc Tiller Arm

Murrays Part# 50-39382011

This is the current stock tiller arm for the Hobie Wave. It is part of the EZ Loc Assembly. This will not work with the older H18, H17, H20 Rudder casting system.

Hobie Part# 39382011

WAVE EZ LOC TILLER ARM

Harken Block Single 2.25" Hexaratchet

Murrays Part# 28-0019

Sheave Size 57mm 2.25"

Max Line Size 10mm 3/8"

Max Working Load 227KG 500lb

Breaking Strength 907kg 2000lb

Holding Power 10:1

Hexaratchets grip loaded sheets, yet allow sailors to ease and trim quickly and with complete control. A switch on the side engages and disengages the ratchet mechanism. Use the 043 or 044 revers ratchets with the 019 or 050 single with becket on spinnaker and jib sheets where ratchets rotate in opposite directions an

HARKEN 2.25" HEXARATCHET BLOCK-SWIVEL, STARBOARD

Trigger Snap Bronze 2.5"

Murrays Part# 27-136800

Lightweight, die-cast, manganese bronze swiveling shackle with overall length of 2-9/16". Weighs 1.5 oz. SWL unspecified.

TRIGGER SNAP-BRONZE 2.5"

Clamcleat Racing Midi Aluminum

Murrays Part# 27-0254

Replace old, worn-out outhaul and downhaul Clamcleats®. Aluminum cleats are stronger than nylon and have increased wear resistance. Easy to mount. Line capacity is 5/32"-5/16". 2 1/8" hole spacing.

CLAMCLEAT RACING MIDI ALUMINUM

FIDDLE BLOCK W/SWIVEL

Use this economical medium fiddle block with cleat and becket for 4:1 righting aids. 3/16 to 3/8" line capacity.

FIDDLE BLOCK WITH SWIVEL

SERIES 19 JIB SHEET & TRAVELER UPGRADE

Single Wire Block With Shackle

Murrays Part# 22-3302

This single wire block can be used to replace the jib halyard block on Nacra 5.2, Performance part 9896.

SINGLE WIRE BLOCK WITH SHACKLE

Schaefer Marine

Ronstan Series 55 Orbit Block, Ratchet with Becket and Cam Cleat

Murrays Part# 21-56130

The Ronstan Orbit 55 Jib Block Ratchet Orbit Block™ has the highest holding power available and is ideal as a jib sheet cleat for the Hobie® 18, Hobie® 20, etc. The automatic ratchet mechanism engages when load is applied, but switches off when it's released.

RONSTAN SERIES 55 ORBIT BLOCK, RATCHET WITH BECKET AND CAM CLEAT

RONSTAN SERIES 30 BALL BEARING ORBIT BLOCK, LASHING

RONSTAN SERIES 30 BALL BEARING ORBIT BLOCK, BECKET AND SWIVEL SHACKLE

RONSTAN SINGLE LEAD BLOCK

Ultraneema Control Line 5mm Blue
Murrays Part# 39-4305bl

ULTRANEEMA CONTROL LINE 5MM

Thimble 1/16-3/32 Stainless Steel

Ronstan's #481 thimble is used on Hobie 18 jib halyard, shrouds, forestays and trapeze wires. Constructed of grade 304 stainless steel. Weight: .1 oz.

RONSTAN STAINLESS THIMBLE FOR 2.5MM (3/32") WIRE

Screw PHMS #10-32 X 7/8"
Stainless Steel

Murrays Part# 19-2916

Stainless steel #10-32 x 7/8" machine screw has pan head with slot

SCREW PHMS #10-32 X 7/8" (SS)

Screw FHSMS #12 X 3/4 Stainless Steel
Murrays Part# 19-1625
Flat head, self-tapping, stainless steel #13 x 3/4" sheet metal screw.

SCREW FHSMS #12 X 3/4" (SS)

Screw PHSMS #8 X 1.50" (Stainless Steel)

Murrays Part# 19-1623

Stainless steel, pan head, self-tapping, #8 x 1.5" sheet metal screw

SCREW PHSMS #8 X 1.50" (SS)

SAIL NUMBER 14" U-CUT BLACK

H14 Angled Luff Caps
Murrays Part# 012-2006
No more battens poking through next to the mast. Tren Tec angled luff caps for Hobie® 14 prevent batten splitting and align batten to the angle of the sail, increasing the life of your sail. Glue to the forward end of the batten.
Hobie Part# 1561
Sold in packages of 6

H-14 ANGLED LUFF CAPS (6)

FHMS #6-32 X 1/2 (Brass)

Murrays Part# 19-1510
Flat head #6-32 x 1/2" brass machine screw fits Pocket Protector kits #01-1001 and #01-1002.

SCREW FHMS #6-32 X 1/2" (BRASS)

HOBIE DOWNHAUL SCALE - 2082

Can you ever remember where the downhaul was set that day you “smoked” everyone. This handy stick on scale takes the guess work out of setting the downhaul.

HOBIE DOWNHAUL SCALE

Fiberglass Stain Remover

Murrays Part# 007-0790

This stain-absorbing gel removes oil, rust and stains, road soil on your boat or other fiberglass surfaces. Simply apply, wait a few minutes, then wipe off. Fiberglass Stain Remover is non-abrasive and requires no sanding or compounding. It also removes rust stains from cloth. 16 oz.

FIBERGLASS STAIN REMOVER

Oxen Block Becket Strap Kit

Murrays Part# 005-0766

OXEN BLOCK BECKET STRAP KIT

OXEN SPRING TRIP LEVER RETURN

Oxen Block Becket Seal Strap

Murrays Part# 005-0761-19

OXEN BLOCK BECKET SEAL STRAP

Oxen Block Becket Clevis Pin 3/16 X 1-1/4"

Length: 3/16 X 1-1/4

OXEN BLOCK BECKET CLEVIS PIN

Oxen C Clip
005-0761-11
REBUILDING OXEN BLOCKS
Murrays is a complete repair facility for Oxen (aka IFL, Ochsen, Ocean) blocks. Just send us your block and we will rebuild it for an average cost of $60.00 plus parts and shipping. Some individuals have had success repairing their own blocks, but we have had many blocks sent to us in pieces when others have failed. We regret that our technician is not available to answer rebuilding questions.

OXEN BLOCK C CLIP

HOBIE STANDARD BRIDLE VANE
Features snap-lock pin and wide indexing support for positive attachment to forestay adjuster. Durable, 7" mylar wind vane freely rotates on 12-1/2" long stainless rod. Wind indicator easily detaches with stainless pull ring. Fits all boats that use a 7- or 10-hole adjuster at the forestay-to-bridle connection.
Use adapter #08-1451 to mount it to a Hobie roller furling drum as used on the Hobie Getaway and 18.
Hobie item #CM7703.

HOBIE STANDARD BRIDLE VANE

SOL-18 MAIN HALYARD W/SHACKLE

Main halyard for a 18' Sol Cat catamaran.

SOL-18 MAIN HALYARD WITH SHACKLE

Inter 20 Jib Halyard Wire

Murrays Part# 002-5483-80

Jib halyard wire for Inter 20 is constructed to factory specifications.

INTER 20 JIB HALYARD WIRE

Inter 20 Roller Furling Forestay 5/32" Black Wire

Murrays Part# 002-5445-32

Forestay for Inter 20 with roller furling jib is constructed of 5/32" black-coated wire to factory specifications.

INTER 20 ROLLER FURLING FORESTAY 5/32" BLACK WIRE

Nacra Inter 18 Double Trapeze (4 handles)

The Murrays Double Trapeze is a set of 4 black or white coated trap wires with 4 handles for double trapezing. A single thimble per pair of handles eliminates clutter at that mast connection.
Order shock cord, harness loops and adjustment kits separately.

A complete trapeze system requires the following:
Harness loop - Can't Miss Ring or Dogbone
Trap Shock Cord
Trap Adjustment kit
Sailing Harness

Trapeze adjustment kits (#001-1121, 001-1130 or 001-1140

NACRA INTER 18 DOUBLE TRAPEZE BLACK WIRE (4)

Nacra Inter 17 Shroud Roller Swaged
Murrays Part# 002-5204-12
Because the manufacturer's specifications vary, a pull-to-pull length is required to ensure correct length for your boat.

NACRA INTER 17 SHROUD 1/8" ROLLER SWAGED

N6.0 North American Diamond Wire Long

Murrays Part# 002-4794-20

Lower diamond wire with turnbuckle and roller for Nacra 6.0 NA (North American) is constructed to factory specifications.

N-6.0NA DIAMOND WIRE LONG

N-6.0NA DIAMOND WIRE SHORT

Previous 1 … 37 38 39 40 41 … 57 Next

Recently viewed

All Sailing Parts