All Sailing Parts

2197 products

    Everything Nacra, Prindle, Hobie and a few more fun odds and ends.

    2197 products
    N-570 BRIDLE 5/32" BLACK
    Murrays Sports
    N-570 FORESTAY 5/32" ROLLER SWAGED BARE WIRE
    Murrays Sports
    N-15 RACE FORESTAY 5/32" BARE WIRE
    Murrays Sports
    Out of Stock
    RIGGING CUSTOM SHROUD
    Murrays Sports
    CUSTOM RIGGING BRIDLE WIRE
    Murrays Sports
    Out of Stock
    NACRA F20 CARBON DOUBLE TRAPEZE 3/32" BLACK WIRE
    Murrays Sports
    Out of Stock
    RIGGING CUSTOM DIAMOND WIRE
    Murrays Sports
    Out of Stock
    PRINDLE RUDDER REBUILD KIT
    Murrays Sports
    Out of Stock
    EPO2 HOBIE CARBON RUDDER BLADE
    Hobie
    Out of Stock
    H-14/WAVE EUROPEAN MAST BASE
    Hobie
    Nacra Rudder Hold Down Murrays Part# 56-30002 This part secures the lower rudder casting to the transom of most Nacra Catamarans. The small plate on both sterns which secures your lower rudder casting on the gudgeons, without it your rudders won't stay on all right. Nacra Part# 30002
    NACRA RUDDER HOLD DOWN
    NACRA
    Out of Stock
    O'Pen Skiff 4.5m2 Rig Complete Murrays Part# 65-108542 The rig includes a fully-battened, 4.5m² mono-film sail with mast pocket, similar to that of a windsurf sail. Rigged on an epoxy mast, the sail has been designed with an open leech to give sailors maximum control and performance in windy conditions. The Cunningham tackle (6 threads + cleat) associated with the boom vang / boom safety attachment, allows sailors to trim efficiently the tension of the sail.
    O'PEN SKIFF 4.5M2 RIG COMPLETE
    Misc
    NACRA 17 MKI TRAMPOLINE OEM
    NACRA
    NACRA 17 MKII TRAMPOLINE OEM
    NACRA
    Trampoline H20 Mesh 1-Piece-Black Murrays Part# 30-3106Y This aftermarket, one-piece, bias-cut, black mesh tramp for Hobie® 20 is not Hobie® Class-legal for racing. The tramp includes hiking straps, trapeze grommets, 16" by 24" Velcro pocket and webbing loops.
    H-20 1 PIECE TRAMPOLINE-BLACK
    Murrays Sports
    NACRA 5.0 1 PIECE TRAMPOLINE-BLACK
    Murrays Sports
    Nacra Stern Support-XL Murrays Part# 56-30972 The Nacra stern supports XL are specially designed for foiling boats. The Nacra stern supports XL are designed to support your boat while standing on the beach. It prevents the hull from damage as the hull is lifted from the ground. They are made out of polyethylene. Therefore the stern supports supports are light and weather resistant. the color doesn't show on the hulls and they are easy to maintain. Due to the material they will float and are flexible.
    NACRA STERN SUPPORT-XL
    NACRA
    H-16 GLOBAL EDITION
    Hobie
    Harken 3/16" 5mm Torlon Ball Bearing Murrays Part# 28-2708 Micro Torlon Ball Bearings used in Harken 2700 2701 2702 2703 traveler cars. Sold in packs of 20
    HARKEN 3/16" 5MM TORLON BALL BEARING
    Harken
    Sunfish Deck Cover-Poly Blue Murrays Part# 30-7050 Sunfish Direct covers are manufactured in the USA, with the most advanced materials available and are the only cover sporting a 5 year limited warranty. Built to the highest quality standards, these covers are the best fitting, longest lasting and easiest to use covers on the market today.  Specifications:  Crafted in the USA UV and mildew resistant Water repellent Breathable Exceptionally strong
    SUNFISH DECK COVER-POLY BLUE
    Murrays Sports
    SUNFISH DECK COVER WITH SPARS-POLY BLUE
    Murrays Sports
    WAVE SAILBOAT
    Hobie
    Out of Stock
    Sunfish Mainsail-Multi Colored Murrays Part# 68-64316 Classic Sunfish sails are recognized all over the world for their bright and fun colors.  Made by Sunfish Direct to be durable for many years of sailing. Manufactured by Sunfish Direct Traditional 6 panel design Material: Material: 3.8 oz Dacron Sail area: 75 square feet - 6.97 square meters Luff: 13.25 feet Leech: 14.25 feet Foot: 13.25 feet Includes a window for maximum visibility
    SUNFISH MAINSAIL-MUTI COLORED
    Laser Performance
    Sunfish Lower Mast Cap With Fastener Murrays Part# 68-90431 This plastic plug fits securely at the bottom of the Sunfish mast, providing protection and stability. Features:  Designed for the lower end of the mast Includes fasteners for secure installation Provides protection and structural support for the mast.
    SUNFISH LOWER MAST CAP WITH FASTENER
    Laser Performance
    Sunfish Boom Cap With Eye Murrays Part# 68-90428 This plastic cap mounts to the outer end of the boom, providing a secure attachment point for the outhaul. The integrated eyelet allows for easy tie-off. Features: Includes groove pin for secure installation Provides a strong and reliable outhaul attachment point Durable plastic construction for long-lasting use A necessary component for proper sail rigging and outhaul management.
    SUNFISH BOOM CAP WITH EYE
    Laser Performance
    BBTalkin' 3.0 Master Unit Murrays Part# 52-2532 Include items: 3.0 MASTER x1 TypeC USB charging cable x1 Mounts
    BBTALKIN' MASTER UNIT 3.0
    BBTalkin'
    BBTalkin' Boom Microphone Cover Murrays Part# 52-2530 The BBT Boom Microphone Cover (Set of 5) replacement foam cover. Includes foam cover and Velcro fastener which is compatible with the BbTALKIN USA head accessories.
    BBTALKIN' BOOM MICROPHONE COVER (5)
    BBTalkin'
    The BBT Helmet Mounts have a slide and lock technology, locking the two tabs on the back of your waterproof case which houses your BbTALKIN unit.
    BBTALKIN' HELMET MOUNT
    BBTalkin'
    BBTalkin' Multi Connector Set Murrays Part# 52-2521 This connector is designed with our secure waterproof seal that screws into your BBTalkin' Unit. The end of this connector is a female 3.5mm jack. You can plug any male 3.5mm jack into this multi-connector. If you do not wish to use a BBTalkin' headset with your units, you can plug any earbud with microphone set up that has a 3.5mm male jack into this connector.
    BBTALKIN' MULTI CONNECTOR SET
    BBTalkin'
    Helmet Speaker Pad with Microphone Murrays Part# 52-2512M-1 The Helmet Speaker Pad with Microphone is a single sided helmet speaker pad with microphone by BbTALKIN USA. This helmet pad is designed to be used with the Advance Unit. You plug the boom microphone’s 3.5mm audio cable directly into your Advance Unit to establish communication. The microphone and speaker piece on the helmet pads are completely waterproof. The design of the helmet pad allows the flexibility to change out either the microphone pie
    BBTALKIN' HELMET SPEAKER PAD WITH MICROPHONE
    BBTalkin'
    BBTalkin' Sports Headset with Headband V2.0 Murrays Part# 52-2511-1 Waterproof headset designed for BBTalkin' Bluetooth Waterproof communication devices. The headband is a lightweight design with a single sided speaker and boom microphone. This comes with an arm band for mounting the unit.
    BBTALKIN' SPORTS HEADSET WITH HEADBAND V2.0
    BBTalkin'
    Rooster Sunglass Sport Strap Murrays Part# 48-130143 The elasticated strap combined with cylindrical rubber inserts and adjustable toggle provides a secure and unrestrictive solution to keeping your glasses in place.
    ROOSTER SUNGLASS SPORT STRAP
    Rooster
    Constructed from 3-layer material with durable fully taped seams for maximum water and spray protection. This jacket is tailored to include cleverly positioned pockets, reflective stow away hood, fleece lined hand warmer pockets, reflective prints and adjustable cuffs/hem. A comfortable fit that comes in cool tonal grey/black with accents of Rooster red styling throughout.
    ROOSTER PASSAGE 3 LAYER JACKET
    Rooster
    FORWARD KNIT HORN BEANIE
    Forward Wip
    Forward WIP Horns Transfer 9x16" Murrays Part# 47-0024-2 Transfer the Forward WIP Horns sticker onto any sailing surface for the best logo integration possible. No background but the one you provide. This bull has horns and competitors better watch out.
    FORWARD WIP HORNS TRANSFER 9x16"
    Forward Wip
    Forward Flex Smock Black Murrays Part# 47-3510 The Forward Flex Smock is a stylishly designed sailing smock featuring a unique neoprene back panel to give extra flexibility and comfort. Made from 3 layers of highly breathable yet waterproof material. This smock has fold over neck fastening with a zipped front and waterproof wrist fastenings. Ideal when worn over the WIP Long john. The flex panel in the back allows the smock to fit close without hindering movement.
    FORWARD FLEX SMOCK-JR14
    Forward Wip
    MARINE FORK 1/8" (SS)
    Misc
    Out of Stock
    F16/F18inf Adjustable Tiller Crossbar Murrays Part# 56-30138 ​The adjustable tiller tie bar, when delivered it comes including the rubber euro rods for connecting it with the rudders / tiller arms. ​In the center of the tiller crossbar, the connection part (U-bracket) will also be mounted (not the flex joint).​
    NACRA F16/F18INF ADJUSTABLE TILLER CROSSBAR
    NACRA
    DOWNHAUL KIT: CASCADE 8:1 H-20 UPGRADE
    Murrays Sports
    SPRING TENSIONED SNAP SHACKLE
    Murrays Sports
    Recently viewed