All Sailing Parts

All Sailing Parts

2262 products

Everything Nacra, Prindle, Hobie and a few more fun odds and ends.

2262 products

Sort

Screw FHMS #8-32 X 1.25 (Nylon)
Murrays Part# 19-1520BK
Nylon #8-32 x 1.25" flat head screw for installation of ports. Available in black or white.

SCREW FHMS #8-32 X 1.25" (BLACK NYLON)

Standard Batten Cap

Murrays Part# 51-14034110

This is a pack of ten main sail batten caps from Hobie Europe allows tying of battens for a fixed mount instead of using a cleat.

Sold in a package of 10

STANDARD BATTEN CAP (10)

H14 Line Package Non-Comptip

Murrays Part# 001-3914

Replacement Line package for your classic all aluminum mast Hobie 16. 

Line Package Includes:

Main Halyard 3/16" 22'

Mainsheet 3/8" 42'

Downhaul 3/16" VLS 5'

Outhaul 3/16" VLS 7.5'

Tramp Center Lacing 1/4" 19'

Tramp Rear Lacing 1/4" 15'

Righting Line 1/2" 16'

H-14 LINE PACKAGE NON-COMP TIP

Downhaul Kit 8:1 H18
Murrays Part# 001-2150
This is a performance upgrade downhaul kit that give increased performance control for your Hobie 18 Catamaran. The downhaul leads are run to the side of the boat for crew control and the loads are oriented to reduce sail tack damage that is common on the H18. It takes minutes to install with a rivet gun a drill and approximate measuring.
The kit was born from a discussion at the 2023 NACs wherein many of the boats in Division 4 have a variation of the

H-18 DOWNHAUL KIT 8:1

PRINDLE 18 LINE PACKAGE

O’Pen Skiff Mainsheet Ratchet Block

The O’PEN SKIFF MAINSHEET RATCHET BLOCK is the OEM replacement block for the O’Pen Skiff. Formerly known as the  O’Pen Bic.

O’Pen Skiff part # 31331.

O'PEN SKIFF MAINSHEET RATCHET BLOCK

NACRA MAST HEAD SHEAVE - 30185

NACRA MAST HEAD SHEAVE

P-19 Tiller Arm
Murrays Part# 56-5009

PRINDLE 19 TILLER ARM

Nacra Side Loader
Murrays Part# 56-1018
Side loader holds daggerboard in place
Nacra Sailing factory item #30008.

NACRA SIDE LOADER

Screw PHSMS #10 X 1/2 Stainless Steel Philips Head
Murrays Part# 19-3209
Stainless steel, Phillips pan head #10 x 1/2" self-tapping sheet metal screw.

SCREW PHSMS #10 X 1/2" (SS)

Hobie Jib Batten Pocket Protector with Screws

Hobie part number 22080011

HOBIE JIB BATTEN POCKET PROTECTOR WTH SCREWS

WIRE 3/32" 1X19 WHITE COATED

Wire 3/32" 1X19 Black Coated

316 stainless steel cable is the gold standard for marine rigging applications due to its high strength and corrosion resistance. 1x19 cable is rigid, resists kinking, and has a extremely high load bearing capacity. PVC coating increases UV and abrasion resistance.

Price sold by the foot

WIRE 3/32" 1X19 BLACK COATED

Flat Head Machine Screw #8-32 X 1.25 (White Nylon)
Nylon #8-32 x 1.25" flat head screw for installation of ports. Available in black or white

SCREW FHMS #8-32 X 1.25" (WHITE NYLON)

303 AEROSPACE UV PROTECTANT PUMP 10 OZ

303 PROTECTANT PUMP 10OZ

H-17 SPORT SPREADER POLE END CAST

Forward WIP Backpack with Dry Sleeve
Murrays Part# 47-4002
The Forward Backpack with Dry Sleeve is great for day trips, as a carry on and the dry sleeve can keep it dry for use on boats.
Features:
Split pocket design with padded back pocket for computer and or tablet.
Large center pocket for personal with internal pockets and separators to keep your gear organized.
Large External rear pocket for helmets, shoes, or other large items
Sunglasses Pocket
Dry sleeve

FORWARD WIP BACKPACK WITH DRY SLEEVE

Mystic Adjustable Headband-Grey
Murrays Part# 57-1639744
Keep your hair out of your face and your ears warm with the Mystic Adjustable Headband.
3mm Neoprene headband for warmth and function.

MYSTIC ADJUSTABLE HEADBAND-GREY

Mystic Vandal Pro Helmet - Black

Mystic Vandal Pro Helmet - Black

MYSTIC VANDAL PRO HELMET

Nacra 5.5SL Double Trapeze (4 handles)

The Murrays Double Trapeze is a set of 4 black or white coated trap wires with 4 handles for double trapezing. A single thimble per pair of handles eliminates clutter at that mast connection.
Order shock cord, harness loops and adjustment kits separately.

Trapeze adjustment kits (#001-1121, 001-1130 or 001-1140, purchased separately) may be added to trap wires with no installation charge.
Just order the trap wires and the trap adjust kit at the same time and we will

N-5.5SL DOUBLE TRAPEZE (4)

The Passage 3 Layer Hi-Fits trousers are tailored to include durable reinforcement at seat and knee panels, cleverly positioned pockets, fleece lined hand warmer pockets, and adjustments at the shoulders, waist and ankle. A comfortable fit that comes in cool tonal grey/black with accents of Rooster red styling throughout.

Shake up your perception for your next coastal/offshore kit and try something new from Rooster. Constructed from 3-layer material with durable fully taped seams

ROOSTER PASSAGE 3 LAYER HI-FITS

Sol Cat -18 Double Trapeze (4 handles)

The Murrays Double Trapeze is a set of 4 black or white coated trap wires with 4 handles for double trapezing. A single thimble per pair of handles eliminates clutter at that mast connection.
Order shock cord, harness loops and adjustment kits separately.

A complete trapeze system requires the following:
Harness loop - Can't Miss Ring or Dogbone
Trap Shock Cord
Trap Adjustment kit
Sailing Harness

Trapeze adjustment kits (#001-1121, 001-1130 or 001-1140, purchased s

SOL 18 DOUBLE TRAPEZE (4)

The Classic Aquafleece Top is manufactured from a new material developed by Rooster in conjunction with a leading technical fabric manufacturer. This top has a Polyurethane coating on the outside for water resistance, durability and flexibility combined with a fleece inner layer to keep you snug and warm – a combination that works well when wet or dry. It can either be worn under your hikers as a base layer, mid layer or as a top layer over them.

ROOSTER CLASSIC AQUAFLEECE TOP

Rooster Race Armour™ LITE Shorts (NOTE: This is last season version), with Duratex II™ seat reinforcement for increased longevity.
Wear as an over short year-round to provide abrasion resistance and comfort, with Rooster Pro Hike Pads to hike harder for longer, or in warmer climes as a practical, lightweight alternative to a traditional 'wetsuit' or 'hikers'.

ROOSTER RACE ARMOR LITE SHORTS

Stohlquist Womens Storm 3mm Long Jane Wetsuit

STOHLQUIST WOMANS STORM LONG JANE WETSUIT

Outstanding sole protection and toe support make this All Purpose boot a must have for all water sports. Its soft lining and wide zippered opening make putting on the boots a breeze, even over a latex dry suit sock. Made utilizing our proprietary 3D lasts to provide a more stable platform and wider fit than the average wet boot.

ROOSTER ALL PURPOSE BOOT

Rooster Harness Back Pad

ROOSTER HARNESS BACK PAD

POWER RIGHTING SYSTEM WITHOUT POLE

Ronstan Series 40 Ball Bearing Block, Double with Becket

Murrays Part# 21-40210

This block is used as a replacement for the upper mainsheet block on a Hobie Getaway. Double sheave block with becket and swivel shackle head (non-locking)

RONSTAN SERIES 40 BALL BEARING BLOCK, DOUBLE WITH BECKET

Forward Baseball Sailing Hat-Blue

Murrays Part# 47-0090-2

The Forward Sailing Hat features an adjustable Velcro strap and reflective print.

Features:

Velcro adjustment for a perfect fit
Reflective Velcro
100% polyester

FORWAD BASEBALL SAILING HAT-BLUE

H-16 MAINSAIL (MISTRAL)

H16 Jib Sail (Zephyr)

Murrays Part# 50-209910601

Zephyr Jib for the Hobie 16. One of our most popular color options!

Hobie 16 class approved mainsail.
Made from heavy 6 oz Dacron
Battens sold separately
Comes with a sail number preinstalled

Hobie Part# 209910601

H-16 JIB SAIL (ZEPHYR)

H16 Mainsail (Zephyr)

Murrays Part# 50-209920601

Zephyr mainsail for the Hobie 16. One of our most popular color options!

Hobie 16 class approved mainsail
Made from heavy 6 oz Dacron
Includes a sail bag
Battens sold separately
Comes with a sail number preinstalled

Hobie Part# 209920601

H-16 MAILSAIL (ZEPHYR)

Mast Over Rotator

Murrays Part# 56-9866

This is the big wish bone rotator that goes out in front of the mast. Most have been removed or retrofitted, but we have a couple left if you're hunting for one!

Nacra part# 9866

NACRA MAST OVER ROTATOR

NACRA UPPER RUDDER CASTING MKII WITHOUT TILLER ARM

Tiger Double Trapeze (4 handles)

The Murrays Double Trapeze is a set of 4 black or white coated trap wires with 4 handles for double trapezing. A single thimble per pair of handles eliminates clutter at that mast connection.
Order shock cord, harness loops and adjustment kits separately.

A complete trapeze system requires the following:
Harness loop - Can't Miss Ring or Dogbone
Trap Shock Cord
Trap Adjustment kit
Sailing Harness

Trapeze adjustment kits (#001-1121, 001-1130 or 001-1140, purchased

TIGER DOUBLE TRAPEZE (4)

Right Rudder Casting

Murrays Part# 56-4005

Right rudder casting for all Prindles does not include hardware.

Nacra Sailing factory item# 30413

PRINDLE RIGHT RUDDER CASTING

Rudder Bolt

Murrays Part# 56-F184

Upper rudder bolt for all Inters.

Nacra Sailing factory item# 30362

NACRA RUDDER BOLT

Nacra Rudder Adjustment Eye Nut
Murrays Part# 56-F187
This is the lock nut for the adjustment eye on the top of the rudder castings. Infusions MKiii rudder castings stopped using these eyes. Boats sold/ purchased after the release of the F18inf MKiii likely don't have that eye, and so this lock nut is not appropriate.
Rudder adjustment eye nut for all Inters is Nacra Sailing factory item #30363.
Fits Nacra 460, 500, 570,16,17, F18 Infusion and F20 Carbon

NACRA RUDDER ADJUSTMENT EYE NUT

H17 Wing Trampoline
Murrays part# 30-3104-3
The Murrays Hobie 17 Wing Trampoline is a pair of aftermarket trampolines for Hobie 17 wings, they are not class-legal for Hobie class racing. Made with polypropylene mesh is the ideal material for beach cat tramps because it is light, strong and comfortable with very good UV resistance, plus it allows water to drain, so you won’t be sitting in a puddle. Includes both right and left wing trampolines.
These tramps can be laced on vs the stock style of sleeved on

H-17 WING TRAMPOLINE LACE ON

Previous 1 … 28 29 30 31 32 … 57 Next

Recently viewed

All Sailing Parts