All Sailing Parts

All Sailing Parts

2262 products

Everything Nacra, Prindle, Hobie and a few more fun odds and ends.

2262 products

Sort

Batten Cap Leech Adjustable Foam 3/4"
Murrays Part# 012-4080-1
Glue this adjustable 3/4" x 5/16" end cap onto any solid epoxy or foam batten. Batten may need to be modified slightly to ensure a good fit.
Sold individually

3/4" ADJUSTABLE FOAM BATTEN CAP (EA)

Hobie Universal Hull Cradles

Murrays Part# 007-1624

Hobie Cat's universal thermoformed cradles are stronger and less likely to scratch than fiberglass. Carpet provides additional hull protection. The unique wide bottom will fit either a round tube or a flat surface and mounting hardware is included. Pair.

Dimensions of inside of cradle:
Width: 14-1/2"
Depth: 4"
Width 1" from bottom: 10-1/4"

HOBIE UNIVERSAL HULL CRADLES

Kisme Kleet (4)

Murrays Part# 005-1010

KISME KLEET (4)

Oxen Block Roller Becket

Murrays Part# 005-0761-17

OXEN BLOCK BECKET ROLLER

KISME "IT" TRAVELER CAR (PR)

TIGER LOW FORESTAY ROLLER FURLING 5/32- BLACK

Tiger Shroud 5/32" Roller Swaged Black Wire

Murrays Part# 002-6005-12

Single black shroud for Hobie® Tiger is hydraulically swaged to be clean and strong. Constructed to factory specifications.
Hobie® Part# 70792011

TIGER SHROUD 5/32" ROLLER SWAGED BLACK WIRE

Nacra Inter 18 Roller Furling Forestay 5/32" Black Wire

Murrays Part# 002-5345-92

Forestay for Inter 18 is constructed to 5/32" black-coated wire to factory specifications.

NACRA INTER 18 RF FORESTAY 5/32" BLACK WIRE

Inter 18 Shroud 5/32" Black Wire Roller Swaged

Murrays Part# 002-5305-12

Single black shroud for Inter 18 is hydraulically swaged to be clean and strong. Constructed to factory specifications.

NACRA INTER 18 SHROUD 5/32" BLACK WIRE ROLLER SWAGED

Nacra Inter 17 Trapeze Black Wires
(2 Handles)

Murrays Part# 002-5253-02

The Nacra Inter F17 Trapeze Wires Black (2) basic assembly includes two coated trapeze wires 3/32" (1x19) with nylon handles and a thimble at each end. Wires end just below handles. Order shock cord and adjustment kits separately.

A trapeze adjustment kit (#01-1121 or 01-1140, purchased separately) may be added to wire with no installation charge! Check box when ordering and wire length will be adjusted accordingly.

NACRA INTER 17 TRAPEZE BLACK WIRES (2)

Nacra Inter 17 Forestay 1/8" Black
Murrays Part# 002-5244-02
Because the manufacturer's specifications vary, a pull-to-pull length is required to ensure correct length for your boat.

NACRA INTER 17 FORESTAY 1/8" BLACK WIRE

Lido 14 Shroud 3/32" White Wire

Murrays Part# 002-5103-91

Single white shroud for Lido 14 is constructed to factory length.

LIDO 14 SHROUD 3/32" WHITE WIRE

N-6.0NA FORESTAY 5/32" BLACK WIRE

N-5.7 MAIN HALYARD W/SHACKLE

N-5.7 BRIDLE 5/32 BLACK WIRE

N5.5SL, N5.7 Shroud 5/32" Black Wire Roller Swaged

Murrays Part# 002-4305-12

Single black shroud for Nacra 5.5SL and 5.7 is hydraulically swaged to be clean and strong. Constructed to factory specifications.

N-5.5SL/5.7 SHROUD 5/32" BLACK WIRE ROLLER SWAGED

N-5.2 JIB HALYARD WITH SHACKLE

N5.0 Shroud 5/32" Black Wire Roller Swaged

Murrays Part# 002-4105-12

Single black shroud for Nacra 5.0 is constructed of 5/32" wire and is hydraulically swaged to be clean and strong. Constructed to factory specifications.

N-5.0 SHROUD 5/32" BLACK WIRE ROLLER SWAGED

Prindle 18.2 Forestay 5/32" Black Wire with Turnbuckle

Murrays Part# 002-2545-42

Forestay with turnbuckle for Prindle 18.2 is constructed to factory specifications.

PRINDLE 18.2 FORESTAY 5/32"BLACK WIRE WITH TURNBUCKLE

Prindle upper forestay

PRINDLE 18.2 UPPER FORESTAY 5/32

PRINDLE 18.2 SHROUD 5/32' BLACK WIRE ROLER SWAGED

Prindle 18.2/19 Jib Block Wire 4-Way

Murrays Part# 002-2424-20

Four-way jib block wire for Prindle 18-2 or 19 is constructed to factory specifications.

PRINDLE 18.2/19 JIB BLOCK WIRE 4-WAY

PRINDLE 18 UPPER FORESTAY 5/32 BARE

P18 Bridle 5/32" Black
Murrays Part# 002-2315-02
One black bridle for Prindle 18 is constructed to factory specifications.

PRINDLE 18 BRIDLE 5/32" BLACK WIRE

H18SX Diamond Wire without Turnbuckle

Murrays Part# 002-0694-20

Diamond wire for Hobie® 18SX is constructed with stainless fork, jib roller and left-hand threaded stud. Turnbuckle not included.

Compare to Hobie Cat® Part# 68750001

H-18SX DIAMOND WIRE WITHOUT TURNBUCKLE

H18SX Bridle 5/32" Black Wire

Murrays Part# 002-0615-22

Single black bridle for Hobie® 18SX is constructed of 5/32" wire to factory specifications.

Compare to Hobie Cat® Part# 60822001 Black or 60820001 White

H-18SX BRIDLE 5/32" BLACK WIRE

H-18SX Shroud Roller Swaged 5/32" Black Wire

Murrays Part# 002-0605-12

Single black shroud (sidestay) for Hobie® 18SX is hydraulically swaged for extra strength and a cleaner connection. Constructed to factory specifications.

Compare to Hobie Cat® Part# 68793501

H-18SX SHROUD 5/32" BLACK WIRE ROLLER SWAGED

H21 Special Edition Diamond Wire without Turnbuckle

Murrays Part# 002-0595-20

Diamond wire without turnbuckle for Hobie® 21SE (Special Edition) is constructed to factory specifications.

The H21SE is sometimes confused with the H21SC (Sport Cruiser). Please note that the H21SE is differentiated by its 10' beam and lack of a front tramp.

H-21SE DIAMOND WIRE WITHOUT TURNBUCKLE

H17 Shroud 5/32 Roller Swedge

Murrays Part# 002-0305-12

This is our strongest Shroud for the Hobie 17.  If you have a Hobie 17 Sport or Hobie 17 Super kit or other setup that has a jib on the front, you need these.

Heavy duty 5/32" single black shroud (sidestay) for Hobie 17 or Hobie 17 Sport is hydraulically swaged with a thimble and marine eye for a cleaner, stronger shroud.

H-17 SPORT SHROUD 5/32" WIRE ROLLER SWAGED

Base Pad Universal U-drill 

Murrays Part# 001-8014

This "potato chip" (2" OD) pad fits or can be modified to fit almost any main beam or mast extrusion for use with Harken micro cleats with fairleads or Ronstan small cleats with fairleads. To modify, put sandpaper on beam and rub base pad to suit and/or fill gap with silicone sealant and allow to dry before securing. Fasteners are not included.

BASE PAD UNIVERSAL U-DRILL

H-17 BRIDLE CROSSBAR ASSEMBLY

Key-Ball Can't Hurt Connectors

Murrays Part# 001-1213

This pair of connectors is designed for use with the carbon Key-Hole buckle #01-0311. Can't Hurt rings are a light and flexible alternative to "hard" stainless steel dogbones. Black high pressure nylon tubing covers 1/8" (1x19) stainless wire.

KEY-BALL CAN'T HURT CONNECTOR

3-Hole Adapter Pad

Murrays Part# 001-0109

Our 3-hole adapter pad fits a Hobie® or Prindle elliptical crossbar. Polyurethane bases provide flat mounting surfaces for mast rotation control cleats, barberhauler cleats, or Hobie® 16 jib trim cleats. Use to mount small Ronstan C-Cleat (#21-5000) or Ronstan Small or Large Swivel 360 Cleats (#21-0067 or #21-0058). Each base can be port or starboard, depending on how cleats are installed.

3-HOLE ADAPTER PAD

Spring 1/4" Stainless Steel

Murrays.com Part# 001-0060

1/4" stainless steel spring as used in the Murrays Tiller Connection Kit (#01-2061)

This spring fits on a 1/4 bolt.

Specs: 1/2" Long x 3/8" OD

Spring 1/4" Stainless Steel 

Murrays Part# 001-0060

1/4" stainless steel spring as used in the Murrays Tiller Connection Kit (#01-2061)

SPRING 1/4" (SS)

N5.0 Diamond Wire with Turnbuckle

Murrays Part# 002-4194-20

Diamond wire with turnbuckle for Nacra 5.0 is constructed to factory specifications.

N-5.0 DIAMOND WIRE WITH TURNBUCKLE

N-5.0 JIB HALYARD W/SHACKLE

SCREW STAINLESS STEEL #10 x 3/4 PHSM-PH

Getaway Forward Trampoline 2001-2016

Murrays Part# 50-37980055

GETAWAY FORWARD TRAMPOLINE 2001-2016

Getaway Mesh Trampoline 2001-16

Murrays Part# 50-37970055

The Hobie factory replacement Hobie Getaway Mesh Trampoline is heat welded for longevity. Class legal for Hobie racing.

HOBIE GETAWAY 2001-16 MESH TRAMPOLINE-BLACK

Compare to Hobie part number 62000001 - Hobie 18 Main Battens

Compare to Hobie part number 62000001 - Hobie 18 Main Battens

H-18 MAIN FIBERGLASS BATTEN SET

Previous 1 … 30 31 32 33 34 … 57 Next

Recently viewed

All Sailing Parts