All Sailing Parts

2197 products

    Everything Nacra, Prindle, Hobie and a few more fun odds and ends.

    2197 products
    Ronstan Swivel Shackle 3/16" (Jaw/Jaw) Murrays Part# 21-0120 Ronstan's swivel shackle has 3/16" diameter pins and 1430 lb. breaking load. Bodies and pins are constructed of grade 316 stainless steel. 1-1/4" length from centers of pins. Weighs .7 oz. Specific Details: A (in) 3/16 B (in) 15/32 C (in) 1 1/4 E (in) 11/32 Ronstan Part# RF120
    RONSTAN SWIVEL SHACKLE 3/16" (JAW/JAW)
    Ronstan
    Ronstan Furler Drum 2.5 Fork/Fork
    Ronstan
    RONSTAN SWIVEL 360 WITH SMALL C-CLEAT
    Ronstan
    Trapeze Ring With Adjuster Block Murrays Part# 21-0017 FEATURES Oversize 6mm (7/32″) diameter stainless steel rod loop 20mm (3/4″) ball bearing block for 2:1 system Block accepts up to 6mm (1/4″) diam. line MATERIALS Grade 316 stainless steel loop and ball bearings Acetal sheave Nylon black cheeks Weight 84g Ronstan Part # RF17
    RONSTAN TRAPEZE RING WITH ADJUSTER BLOCK
    Ronstan
    Hex Bolt 3/8 X 4.25" Murrays Part# 56-F142 3/8" x 4-1/4" hex head bolt is for Prindle front crossbar Performance Sports factory item# F142
    PRINDLE HEX BOLT 3/8 X 4.25"
    NACRA
    Rudder Bolt Murrays Part# 56-F184 Upper rudder bolt for all Inters. Nacra Sailing factory item# 30362
    NACRA RUDDER BOLT
    NACRA
    NACRA DOLPHIN STRIKER ROD
    NACRA
    Rudder Bolt Base Inter Murrays Part# 56-F188 1/4-20 x 2" FHMS rudder bolt (base) for all Nacra Inters.
    NACRA RUDDER BOLT BASE
    NACRA
    H17 Wing Trampoline Murrays part# 30-3104-3 The Murrays Hobie 17 Wing Trampoline is a pair of aftermarket trampolines for Hobie 17 wings, they are not class-legal for Hobie class racing. Made with polypropylene mesh is the ideal material for beach cat tramps because it is light, strong and comfortable with very good UV resistance, plus it allows water to drain, so you won’t be sitting in a puddle. Includes both right and left wing trampolines. These tramps can be laced on vs the stock style of sleeved on
    H-17 WING TRAMPOLINE SET
    Murrays Sports
    Out of Stock
    Getaway Main Batten Set Murrays Part# 30-3045 The Murrays Getaway Main Batten Set are the same specs as the OEM version except yellow and with white batten caps. This set includes eight battens with black OEM luff caps and white leech caps. Specifications:  Batten #8 - 34.5" jib batten Batten #7 - 55" Batten #6 - 69" Batten #5 - 77.75" Batten #4 - 84.25" Batten #3 - 88.75" Batten #2 - 90.75" Batten #1 - 92" Hobie Part# 37016001
    GETAWAY MAIN BATTEN SET
    Murrays Sports
    Gooseneck Box Fitting Murrays Part# 56-7808 Prindle Gooseneck box fitting, part of the boom to mast connection assembly to on Nacra 5.2s and all Prindles. Nacra Sailing Factory item# 30203
    NACRA GOOSENECK BOX FITTING
    NACRA
    Out of Stock
    H16 Jib Swivel Cleat with Roller Fairlead (PR) The Ronstan Jib Swivel with Roller Fairlead is low-profile swiveling jib traveler car with roller fairlead, and it is a must-have item when rebuilding your older Hobie cat. Primarily designed as a H16 Jib Cleat. This car features a swiveling dead eye with cam cleat and stop. Includes two traveler cars with fairlead, cleat and stopper. Work with jib sheet up to 8mm in size. This is one of the best ways to upgrade your old H16 jib traveler car system.
    H-16 JIB SWIVEL CLEAT WITH ROLLER FAIRLEAD (PR)
    Murrays Sports
    H14/16 Gooseneck Slide Murrays Part# 50-10772001 ​Gooseneck slide for Hobie® 14 or 16 is a factory replacement part.
    H-14/16 GOOSENECK SLIDE
    Hobie
    Harken 40mm Block -Swivel, Becket, Cam Cleat Murrays Part# 28-2646 Low-friction Carbo Air blocks are lightweight, strong, reliable—and affordable. Companions to our popular Harken Big Boat blocks, these small, compact blocks have very high working loads for safe, easy trimming.
    HARKEN 40MM BLOCK- SWIVEL BECKET, CAM CLEAT
    Harken
    Out of Stock
    RWO Replacement QR Hook
    REPLACEMENT TRAPEZE HOOK WITH RETAINER
    RWO
    TURNBUCKLE JAW 1/4 X 28 RH
    Misc
    SOL-18 BRIDLE 1/8" WHITE WIRE
    Murrays Sports
    The Murrays Prindle Trapeze Wires are a set of 2 black or white coated trap wires with 2 handles for trapezing. Order shock cord, harness loops and adjustment kits separately.
    H17 Trapeze Wires (2) The H17 Trapeze Wires (2) basic trapeze assembly includes two coated trapeze wires 3/32" (1x19) with nylon handles and a thimble at each end. Wires end just below handles. Order with a trapeze adjustment kit (#01-1121 or 01-1140, purchased separately) and it will be added to wire with no installation charge. Compare to Hobie part number 1471B. ​Order shock cord, Can't miss rings/dog bones and adjustment kits separately. Murrays PN 002-0353-01 002-0353-02
    PRINDLE 16 TRAPEZE WIRES (2)
    Murrays Sports
    N15 Shroud 5/32" Race Murrays Part# 002-4805-22 NACRA 15 Shroud 5/32 (4mm) Race (staymaster) to be used with Staymaster style turnbuckles
    NACRA INFUSION F18 RACE SHROUD 5/32" BLACK WIRE
    Murrays Sports
    NF18 Shroud 5/32" Black Wire Murrays Part# 002-5605-12
    N-F18 SHROUD 5/32" BLACK WIRE
    Murrays Sports
    Out of Stock
    Mount Kit for Universal Mama Bob Murrays Part# 007-30120 This is the mounting kit that attaches to a Mama Bob mast float for mounting on most boats. Hobie Part #30120
    MOUNT KIT FOR UNIVERSAL MAMA BOB
    Hobie
    Nacra Inter 20 Bridle 5/32" Black Wire Murrays Part# 002-5415-22 Single black bridle for Inter 20 is constructed to factory specifications. You must select the type of jib your boat has so that the bridle's length and fittings will be correct for your boat.
    NACRA INTER 20 BRIDLE 5/32" BLACK WIRE
    Murrays Sports
    H18 Diamond Wire with Turnbuckle Murrays Part# 002-0494-40C​ Diamond wire for one side of a Hobie® 18 or 21SC is constructed with 1/8" 1x9 bare wire, stainless fork, jib roller and turnbuckles. Also used on the the Hobie 21SC is sometimes confused with the H21SE (Special Edition). Please note that the H21SC is differentiated by its 8.5' beam, front tramp and Hobie® 18 rigging.
    H18 Diamond Wire with Turnbuckle Murrays Part# 002-0494-40C​ Diamond wire for one side of a Hobie® 18 or 21SC is constructed with 1/8" 1x9 bare wire, stainless fork, jib roller and turnbuckles. Also used on the the Hobie 21SC is sometimes confused with the H21SE (Special Edition). Note: The H21SC is differentiated by its 8.5' beam, front tramp and Hobie® 18 rigging. Compare to Hobie Part# 61750001
    H-18 DIMOND WIRE WITH TURNBUCKLE
    Murrays Sports
    H16 Dyneema Trapeze Lines Murrays Part# 002-0264 Hobie has approved Dyneema trap lines for class racing as of 2016.
    H-16 DYNEEMA TRAPEZE LINES
    Murrays Sports
    H16 Kissme Jib Sheet & Traveler Upgrade Murrays Part 001-3150 This is a great way to upgrade your vintage Hobie 16 jib sheeting system. This kit includes upgraded traveler cars with carbo blocks for smooth function, and lance cleats to facilitate smooth and accurate jib traveler position control. *The difference between this kit and the deluxe is the Lance Cleats vs the Cam Cleats. Lance cleats release to the side and were stock on many early model Hobies while the cam cleats release
    H-16 KISSME JIB SHEET & TRAVELER UPGRADE
    Murrays Sports
    Overhead Surf-Cap-Safety Retainer Murrays Part# 54-4413 The Hat Leash is finally here!  New from Overhead Surf is the Cap-Safe Retainer lanyard. Simply attached to your hat or cap and ensures that if it does get blown off your head, it stays with you.  Total hat saver!!  Now featuring a breakaway snap on the leash so it wont try to rip your head off if the hat gets caught on something. Features: Break away snap connection Hook/Loop for hat connection
    SURF HAT SAFETY RETAINER
    Misc
    Selma_fid_kit 4.5mm-13mm
    Selma Fid kit packaging
    SELMA ROPE SPLICE FIDS x5
    Selma
    ANKLE SEAL REPAIR KIT
    Murrays Sports
    AQUASEAL .75oz PACKAGE WITH COTOL .5OZ
    Gear Aid
    Rope Cutter Replacement Blade Murrays Part# 33-199B Replacement blade for rope cutting tool (#33-199A)
    ROPE CUTTER REPLACMENT BLADE
    Misc
    Out of Stock
    ROPE CUTTING TOOL W/BLADE
    Misc
    #2 Swege-It Kit Murrays PN 33-0012 The #2 Swage-It Kit includes swage-it tool for 1/16", 3/32" and 1/8" oval sleeves. Made in the USA.
    #2 SWAGE-IT KIT
    Misc
    Sunfish Auto Bailer Murrays Part# 68-91026 The bailer is mounted at the bottom of the cockpit and automatically drains excess water, helping to keep the cockpit dry. It can be easily opened and closed using the rubber cap. Features: Fits newer style Sunfish models (1973-present) 13/16″ thread length, which refers to the length of the cap Designed for efficient drainage and easy operation A reliable replacement for maintaining proper cockpit drainage.
    SUNFISH AUTO BAILER
    Laser Performance
    Sunfish Gooseneck Assembly Murrays Part# 68-90638 Classic bronze gooseneck designed for securely attaching the lower boom to the mast. Features: Made from durable bronze for strength and longevity Provides a secure and adjustable connection between boom and mast Traditional design for a classic rigging setup A reliable component for smooth sail control and proper boom positioning. Don’t forget the quick adjust lever for quick and easy adjustments!
    SUNFISH GOOSENECK ASSEMBLY
    Laser Performance
    Sunfish Gudgeon Bracket Murrays Part# 68-91054 The gudgeon bracket bolts to the transom of the SOL or Sunfish, providing a secure mounting point for the rudder head. Features: Made from stainless steel for durability and corrosion resistance Provides a strong and long-lasting attachment for the rudder Essential component for proper rudder installation Built to withstand the elements, ensuring reliable performance on the water.
    SUNFISH GUDGEON BRACKET
    Laser Performance
    Sunfish Sail Ties Murrays Part# 68-L61D029 Secure your sail with this durable and lightweight sail ties, made from 2mm Dyneema® SK78 for exceptional strength and minimal stretch. Designed for easy rigging and a secure hold, this kit is a must-have for Sunfish sailors looking for reliability on the water!
    SUNFISH SAIL TIES
    Laser Performance
    Out of Stock
    P18-2/19 Round Tip Rudder Blade Murrays Part# 56-4225 This is the newer blade with the rounded tip as pictured.
    P18.2/19 ROUND TIP RUDDER BLADE
    Murrays Sports
    TIGER TRAMPOLINE WITH CURVED SIDES-BLACK
    Murrays Sports
    N5.8 1PC BIAS CUT TRAMPOLINE-BLACK
    Murrays Sports
    N6.0 IPC BIAS CUT TRAMPOLINE-BLACK
    Murrays Sports
    Recently viewed