All Sailing Parts

All Sailing Parts

2262 products

    Everything Nacra, Prindle, Hobie and a few more fun odds and ends.

    2262 products
    Out of Stock
    Hobie Wave Trampoline Tension Strap Murrays Part# 50-38970061 Replacement strap for tensioning the Hobie Wave trampoline. Each boat requires four straps.
    WAVE TRAMPOLINE TENSION STRAP
    Hobie
    Hobie Getaway Tiller Connector Screw Murrays Part# 50-40530021 Hobie® factory replacement tiller connector screw for Club Wave. Hobie Part# 40530021
    GETAWAY TILLER CONNECTOR SCREW
    Hobie
    HOBIE JIB HALYARD BLOCK SHEAVE Murrays PN 50-61260000 Hobie® factory replacement sheave for jib halyard block. Used on Hobie 16s and 18s. Hobie part number 61260000 and 61260010
    HOBIE JIB HALYARD BLOCK SHEAVE
    Hobie
    Screw THMS 1/4-20 X 1-5/8" Murrays Part# 50-8030601 Hobie® factory replacement 1/4-20 x 1-5/8" screw. Hobie Part# 8030601
    SCREW THMS 1/4-20 X 1-5/8"
    Hobie
    Screw RHMS 1/4-20 X 1" Murrays Part# 50-8030211 Hobie® factory replacement round head machine screw measures 1/4-20 x 1". Measurements are diameter and threads per inch times grip length. Applications: Hobie 18 - Shroud anchor plate screw
    SCREW RHMS 1/4-20 X 1"
    Hobie
    Rudder Gudgeon Murrays Part# 56-1016 Rudder gudgeon for Prindle 15, 16 and 18 Nacra Sailing factory item# 30993
    NACRA RUDDER GUDGEON
    NACRA
    H16 Adjustable Lower Rudder Casting Murrays Part# 50-10412011 Black adjustable lower rudder casting for Hobie® 16 is a factory replacement part. Includes rudder cam. This is the standard lower casting on Hobie 16 beachcats since 1983. There is an adjustable screw at the base of the casting to help adjust rudder rake and a slightly different casting shape than the earlier rudder castings. The spring length is also longer on these than pre '83 castings.
    Hobie 16 ADJUSTABLE LOWER RUDDER CASTING
    Hobie
    Out of Stock
    H16 Rudder Casting Cam Pin 1/4" Murrays Part# 50-10470000 Hobie® factory replacement flare cam pin for Hobie® 16 rudder casting is 1/4" diameter. Flaring this pin can be difficult, so Murrays recommends using #01-2051 sister screws in place of this stock pin.
    H-16 RUDDER CAST CAM PIN 1/4"
    Hobie
    Out of Stock
    H18 Rudder Cam Pin Murrays Part# 50-50312301 Hobie® factory replacement rudder cam pin for Hobie 17, 18, 20, 21SC and 21SE as well as older Wave and Getaway models.
    H-18 RUDDER CAM PIN
    Hobie
    Roller Furler Darby Ring (Large) Murrays Part# 50-8062511 Hobie® factory replacement large darby ring for roller furler. Hobie Part# 8062511
    ROLLER FURLER DARBY RING (LARGE)
    Hobie
    H17 Mast Base Washer Murrays Part# 50-52411001 Replacement washer for Hobie 17 mast base assembly. Hobie Part# 52411001
    H-17 MAST BASE WASHER
    Hobie
    Hex Bolt5/16 X 4.25" Murrays Part# 56-F104 Hexcap bolt measures 5/16 x 4-1/4" and is used on the front crossbar (outboard) of Prindle 15/16/Escape and older Nacras. Performance Sports factory item #F104.
    PRINDLE/ESCAPE/NACRA HEX BOLT 5/16 X 4.25"
    NACRA
    Out of Stock
    H14 Black Mesh Trampoline Murrays Part# 50-10970055 The H14 black mesh trampoline is a trampoline for a Hobie 14. It is heat-welded for easy maintenance and a long life. Mesh allows wind and water to pass through, so you're not sitting in a puddle. Includes halyard pocket. Order lacing separately. Hobie Part# 10970055
    H-14 BLACK MESH TRAMPOLINE
    Hobie
    Out of Stock
    H16 Gudgeon Casting Murrays Part# 50-50102011 Standard on current production Hobie 16s, these die cast aluminum gudgeons are now available for your Hobie 16. Their one piece construction and plastic bushed pin holes guarantee pin hole alignment, reducing rudder pin wear, slop and drag. Die cast aluminum construction Standard on all Hobie 16 catamarans Uses 8x #8030402 screw for installation (sold separately)
    H-16 GUDGEON CASTING
    Hobie
    H18/20 Gooseneck Yoke Murrays Part# 50-60710000 Hobie® factory replacement gooseneck yoke for Hobie 18 and 20. Hobie Part# 60710000
    H-18/20 GOOSENECK YOKE
    Hobie
    H18 Compression Sleeve Murrays Part# 50-61490000 Hobie® factory replacement compression sleeve for mast of Hobie 18.
    H-18 COMPRESSION SLEEVE
    Hobie
    H20 Boom Retainer Clip Murrays Part# 50-8060151 Hobie® factory replacement boom retainer clip for Hobie 20. Hobie Part# 8060151
    H-20 BOOM RETAINER CLIP
    Hobie
    H18 Boom Outhaul Car Assembly Murrays Part# 50-60220001 Hobie® factory replacement outhaul car assembly for Hobie® 18. Outhaul and shock cord are not included. For outhaul line, order 7' of 3/16" black line #39-2311BK. For outhaul shock cord, order 7' of #39-7491 black 1/4" shock cord.
    H-18 BOOM OUTHAUL CAR ASSEMBLY
    Hobie
    Bolt Hex 5/16-18 X 1" Murrays Part# 50-8040171 Hobie® factory hex head bolt measures 5/16-18 x 1". Used on #07-1953 Tiller Connector for Hobie® 20. Hobie Part# 8040171
    BOLT HEX 5/16-18 X 1"
    Hobie
    Tracker Hinge Upright Murrays Part# 007-1054 The standard replacement hinge upright for the tracker on all Hobie® 14, 16 and newer 17's. Fits: Hobie Getaway Main Traveler Car Hobie Cat® Part# 11840100
    TRACKER UPRIGHT HINGE
    Hobie
    Stop Sleeve 3/32" Murrays Part# 002-1031 A stop sleeve grips a single wire to provide a "stop" for halyard hooks or trapeze handle, etc. A special "J" size opening on a nicropress tool is required for closing 3/32" and 1/8" stops; 5/32" stop requires "M" opening. Use this page to order item numbers 02-1031 3/32", 02-1041 1/8", 02-1051 5/32" and 02-1061 3/16" stop sleeves.
    STOP SLEEVE 3/32"
    Misc
    Harken 57mm Triple Ratchamatic Block-Swivel, Cam Cleat Murrays Part# 28-2629 The Carbo Ratchmatic® is a load-sensing ratchet block that rolls freely in both directions under low loads, and automatically engages the ratchet as loads increase. Shifting between ratchet and light air modes is seamless. Unloaded the sheet runs freely during mark roundings and jibes. Ratchet engagement may be adjusted to a higher or lower load according to strength and sailing style.
    Harken Hobie 16 main sheet base block
    HARKEN 57MM TRIPLE RATCHAMATIC BLOCK-SWIVEL, CAM CLEAT
    Harken
    H14 Turbo Upper Forestay with Swivel Murrays Part# 002-0134-01 Upper forestay with swivel for Hobie® 14 Turbo is constructed to factory specifications. Turbo refers to the Hobie Factory Version that features a Hobie Roller furling drum, bridles connect to the drum with forks, and an under tramp jib block wire. Compare to Hobie Cat® #10810010
    H-14 TURBO UPPER FORESTAY WITH SWIVEL
    Murrays Sports
    Bolt Hex Head 5/16-18 X 4.50" (Stainless Steel) Murrays Part# 19-2237 Stainless steel hex head bolt for Prindle mast rotation control arm. Use #19-2520 nylock nut. This bolt is a replacement for item #56-F110 Comparable to Hobie Part# 8040211
    BOLT HEX HEAD 5/16-18 X 4.50" SS
    Misc
    Bolt Hex Head 1/4-20 X 3.5" Stainless Steel Murrays Part# 19-2224 Stainless steel hex head bolt measures 1/4-20 x 3-1/2" Pylon Bolt for newer H16 Hobie Part# 8040361
    BOLT 1/4-20 X 3.5" (SS)
    Misc
    Out of Stock
    HOBIE 14 WHITE KNIGHT MAIN SAIL Hobie PN 407917 Murrays PN 50-407917 SAIL MAIN H14 WHITE KNIGHT is one of the new 2026 sail patterns available for the Hobie 14. Limited availability. Includes: Hobie Flying H logo Hobie 14 class decal Sail numbers Batten pocket protectors Sail bag Sail Windows Airflow indicators Does not include battens
    HOBIE 14 WHITE KNIGHT MAIN SAIL Hobie PN 407917 Murrays PN 50-407917 SAIL MAIN H14 WHITE KNIGHT is one of the new 2026 sail patterns available for the Hobie 14. Limited availability. Includes: Hobie Flying H logo Hobie 14 class decal Sail numbers Batten pocket protectors Sail bag Sail Windows Airflow indicators Does not include battens
    HOBIE 14 WHITE KNIGHT MAIN SAIL
    Hobie
    Hobie Wave Classic Line Package Murrays Part# 001-39WCL Package Includes Mainsheet 5/16" 35' Downhaul 3/16" 5' Righting Line 1/2" 15' Tramp Tension Lines 2x 2' 3/16" and 2x 3' 3/16"
    WAVE CLASSIC LINE PACKAGE
    Murrays Sports
    Out of Stock
    Getaway Forestay Assembly
    Murrays Sports
    SSR Light Racing Sheet 8mm Green
    Murrays Sports
    Magic Marine Performance Kneepads
    Magic Marine
    T-9 Boeshield 4oz was developed by The Boeing Company for lubrication and protection of aircraft components. It is a combination of solvents, lubricants, and waxes designed for penetration, moisture displacement, lubrication and protection. Boeshield T-9® dries to a thin waxy film that clings to metal for months. It will loosen rusty and corroded parts and is safe on paints.
    T-9 BOESHIELD 4oz
    T-9
    2182 Ronstan 3/16 Sailmakers Thimble is a great option for DIY dyneema rigging projects. The closed thimble prevents chaffing on your dyneema.
    3/16 Sailmakers Thimble
    Ronstan
    Rooster Sail Bags
    Rooster
    WAVE TILLER CROSSBAR M20 STYLE Hobie PN 39521001
    HOBIE WAVE TILLER CROSSBAR M20 STYLE
    Hobie
    1/4" FAST SHACKLE
    Murrays Sports
    Replacement cat trax beach wheels axle
    CAT TRAX BEACH WHEELS AXLE
    Cat Trax
    H-18 WING MOUNT HARDWARE KIT
    Murrays Sports
    PRINDLE LOOP TOP SINGLE BLOCK
    Ronstan
    O'PEN SKIFF MAST 390cm
    Tahe Outdoors
    Robline Small Soft Shackle - 4mm SK78 Murrays Part# 21-DSH9 The Robline Small Soft Shackle is a great alternative to the metal shackle, with no clevis pins to loose in the water or sand. Soft shackles are also very easy on the boat as they are soft and flexible Quick and easy way to attach jib clew blocks to the jib and the main sheet blocks to the main sail.
    ROBLINE SMALL SOFT SHACKLE-9MM SK78
    Robline
    Recently viewed