All Sailing Parts

All Sailing Parts

2266 products

Everything Nacra, Prindle, Hobie and a few more fun odds and ends.

2266 products

Sort

H17 Shroud 1/8″

The H17 Shroud 1/8″ is a single shroud for Hobie® 17 constructed with 1/8″ wire to factory specifications. Each. Choose from White or Black wire coating. Purchase two to ensure equal lengths.

Thimble/marine eye upgrade Hydraulic swaging produces a cleaner, stronger shroud. A marine eye is installed at the bottom end fitting where breakage commonly occurs. Electrolysis is reduced because both wire and marine eye are stainless steel. Wire manufacturers recommend stainless steel marine

H-17 SHROUD 1/8" BLACK WIRE

FORWARD WIP PROTEC LONG JOHN

Prindle 19 Trapeze Wires - Prindle Part Number 9873

PRINDLE 19 DOUBLE TRAPEZE (4)

Nacra 5.2 Trapeze Wires - NACRA Part Number 9540

N-5.2 DOUBLE TRAPEZE BK (4)

H18 SX Double Trapeze (4 handles)

The SX has a taller mast and longer trap wires than the standard Hobie SE and Magnum versions.

The Murrays Double Trapeze is a set of 4 black or white coated trap wires with 4 handles for double trapezing. A single thimble per pair of handles eliminates clutter at that mast connection.
Order shock cord, harness loops and adjustment kits separately.

A complete trapeze system requires the following:
Harness loop - Can't Miss Ring or Dogbone
Trap Shock Cord
Trap Adj

H-18SX DOUBLE TRAPEZE (4)

The Classic Aquafleece Top is manufactured from a new material developed by Rooster in conjunction with a leading technical fabric manufacturer. This top has a Polyurethane coating on the outside for water resistance, durability and flexibility combined with a fleece inner layer to keep you snug and warm – a combination that works well when wet or dry. It can either be worn under your hikers as a base layer, mid layer or as a top layer over them.

ROOSTER CLASSIC AQUAFLEECE TOP

Rooster Race Armour™ LITE Shorts (NOTE: This is last season version), with Duratex II™ seat reinforcement for increased longevity.
Wear as an over short year-round to provide abrasion resistance and comfort, with Rooster Pro Hike Pads to hike harder for longer, or in warmer climes as a practical, lightweight alternative to a traditional 'wetsuit' or 'hikers'.

ROOSTER RACE ARMOR LITE SHORTS

Outstanding sole protection and toe support make this All Purpose boot a must have for all water sports. Its soft lining and wide zippered opening make putting on the boots a breeze, even over a latex dry suit sock. Made utilizing our proprietary 3D lasts to provide a more stable platform and wider fit than the average wet boot.

ROOSTER ALL PURPOSE BOOT

Hobie Getaway Trampoline Post 2017

GETAWAY AFT 2-PIECE MESH TRAMPOLINE POST 2017

Rooster Dura Pro 5 gloves, short finger sailing gloves

Rooster Dura Pro 5 Glove
If you are looking for a glove suited to mainsheet trimming; where releasing the sheet is just as important as pulling in, our Dura Pro may be the answer. With double layer top quality abrasion resistant Amara on all high load/stress areas, these gloves are extremely supple with excellent grip and are perfect for all helming duties.

ROOSTER DURA PRO 5 GLOVE

Ronstan Series 40 Ball Bearing Block, Double with Becket

Murrays Part# 21-40210

This block is used as a replacement for the upper mainsheet block on a Hobie Getaway. Double sheave block with becket and swivel shackle head (non-locking)

RONSTAN SERIES 40 BALL BEARING BLOCK, DOUBLE WITH BECKET

Forward Baseball Sailing Hat-Blue

Murrays Part# 47-0090-2

The Forward Sailing Hat features an adjustable Velcro strap and reflective print.

Features:

Velcro adjustment for a perfect fit
Reflective Velcro
100% polyester

FORWAD BASEBALL SAILING HAT-BLUE

Front Boom End Cap

Murrays Part# 56-7902

Front boom end cap for Nacra and Prindle cats.

Nacra Sailing factory item# 30204

NACRA/PRINDLE FRONT BOOM END CAP

Lower Diamond Tang

Murrays Part# 56-6610

Lower diamond tang for Inter, Nacra 500 and 570
Mount with six #19-5031 rivets
Use rivet casings if you want to seal the mast

Performance Sports Factory item# 6610

Nacra Sailing Part# 30183

NACRA LOWER DIAMOND TANG

Hobie Mast Float Bracket-Mama Bob

Murrays Part# 51-99000125

The Hobie mast float bracket is compatible with Mama Bobs. It is designed to install a mast float onto a solid aluminum Hobie 16 non-comptip mast head. Fits non-us boats, or old US boats with some modification.

HOBIE MAST FLOAT BRACKET-MAMA BOB

Ronstan Toggle Pin With Lanyard 1/4 X 1"

Murrays Part# 21-1157L

Stainless steel 1/4" diameter toggle pin replaces 1" clevis pin. Secure quick connect/disconnect clevis pin with a lanyard so you loose it.

RONSTAN TOGGLE PIN WITH LANYARD 1/4X1"

104" Hobie batten part number 21000001

H-16 MAINSAIL FIBERGLASS BATTEN 97.5"

O’Pen Skiff Boat Cover

O’Pen Skiff Boat Cover

MURRAYS OPEN SKIFF BOAT OCVER

Getaway Main Batten Set

Murrays Part# 30-3045

The Murrays Getaway Main Batten Set are the same specs as the OEM version except yellow and with white batten caps. This set includes eight battens with black OEM luff caps and white leech caps.

Specifications: 

Batten #8 - 34.5" jib batten
Batten #7 - 55"
Batten #6 - 69"
Batten #5 - 77.75"
Batten #4 - 84.25"
Batten #3 - 88.75"
Batten #2 - 90.75"
Batten #1 - 92"

Hobie Part# 37016001

GETAWAY MAIN BATTEN SET

Gooseneck Box Fitting

Murrays Part# 56-7808

Prindle Gooseneck box fitting, part of the boom to mast connection assembly to on Nacra 5.2s and all Prindles.

Nacra Sailing Factory item# 30203

NACRA-PRINDLE GOOSENECK BOX FITTING

Harken 40mm Block -Swivel, Becket, Cam Cleat

Murrays Part# 28-2646

Low-friction Carbo Air blocks are lightweight, strong, reliable—and affordable. Companions to our popular Harken Big Boat blocks, these small, compact blocks have very high working loads for safe, easy trimming.

HARKEN 40MM BLOCK- SWIVEL BECKET, CAM CLEAT

3M 5200 Adhesive Sealant 3oz

Murrays Part# 40-5203

3M 5200 Marine Adhesive Sealant is the preferred choice for sealing masts. It goes on smoothly, won't sag, and remains workable for up to 4 hours. The seal is extremely strong and retains its strength above and below the waterline. The sealant provides incredible adhesion, yet stays flexible after it's cured. It becomes tack-free in 48 hours; completely cures in 5 to 7 days with no shrinkage. Clean up with kerosene or mineral spirits. 3 oz. tube. White.

3M 5200 ADHESIVE SEALANT 3OZ

Nacra Inter 20 Bridle 5/32"
Black Wire

Murrays Part# 002-5415-22

Single black bridle for Inter 20 is constructed to factory specifications. You must select the type of jib your boat has so that the bridle's length and fittings will be correct for your boat.

NACRA INTER 20 BRIDLE 5/32" BLACK WIRE

H18 Dimond Wire without Turnbuckle

Murrays Part# 002-0494-20

Diamond wire for one side of a Hobie® 18 is constructed with stainless fork, jib roller and left-hand threaded stud. Turnbuckle not included.

Please note: The diamond wire will be constructed with a stud that has left hand threads. Please contact Murrays if you have an older Hobie® 18, as right hand threads may be required.

The change to the left handed thread happened some time in the early 80's.

H-18 DIAMOND WITHOUT TURNBUCKLE

Fast Set Epoxy

Murrays Part# 000-0002-1

Some sailors like to "caramel-coat" the cork ball handle of the hiking stick with epoxy to make the cork ball last longer.

Robline Super Downhaul Line 3.8mm
Murrays Part# 39-1309
FSE Robline's Super Downhaul line is specifically designed to handle the extreme high loads of large formula sailboard race sails. The Super Downhaul line's unique construction keeps the rope round under extreme downhaul loads, which allows it to hold extremely well in clam-style cleat bases. Smooth 12-plait construction and the slippery characteristics of 100% SK75 Dyneema fiber dramatically reduce friction in downhaul purchase systems.

SUPER DOWNHAUL LINE 3.8mm

HEAVY DUTY HAND RIVET TOOL

Sunfish Auto Bailer

Murrays Part# 68-91026

The bailer is mounted at the bottom of the cockpit and automatically drains excess water, helping to keep the cockpit dry. It can be easily opened and closed using the rubber cap.

Features:

Fits newer style Sunfish models (1973-present)
13/16″ thread length, which refers to the length of the cap
Designed for efficient drainage and easy operation

A reliable replacement for maintaining proper cockpit drainage.

SUNFISH AUTO BAILER

Laser Performance

Sunfish Two Loop Bridle

Murrays Part# 68-91122

This two loop bridle provides a secure attachment point for the aft end of the mainsheet, allowing the boom to swing smoothly and evenly from side to side. Made from stainless steel cable with a protective plastic coating, it features two loops that connect to the eye straps on the deck for a strong and durable setup.

Features:
2-loop design for balanced boom movement
Stainless steel cable with plastic coating for durability

SUNFISH TWO LOOP BRIDLE

Laser Performance

Sunfish Gudgeon Bracket

Murrays Part# 68-91054

The gudgeon bracket bolts to the transom of the SOL or Sunfish, providing a secure mounting point for the rudder head.

Features:
Made from stainless steel for durability and corrosion resistance
Provides a strong and long-lasting attachment for the rudder
Essential component for proper rudder installation
Built to withstand the elements, ensuring reliable performance on the water.

SUNFISH GUDGEON BRACKET

Laser Performance

Sunfish Hiking Strap

Murrays Part# 68-91138

This padded hiking strap is designed for maximum comfort while hiking, fitting both old and new Sunfish models.

Features:

Made by Rooster for quality and durability
Features a unique rubber compound with a high coefficient of friction for better grip
Lightweight and durable construction for long-lasting use
Pro Plus Range includes rubber added to the bottom for enhanced stability

A great choice for sailors looking for improved comfort and control on the

SUNFISH HIKING STRAP

Laser Performance

Sunfish Sail Rings

Murrays Part# 68-95880

Secure your sail with these durable sail rings, designed to fit around the booms and clip onto the sail for a reliable hold.

Features:
Package Includes: 30 sail rings
Color: Clear
Perfect for keeping your sail in place and ensuring smooth sailing!

SUNFISH SAIL RINGS (30)

Laser Performance

Sunfish Sail Ties

Murrays Part# 68-L61D029

Secure your sail with this durable and lightweight sail ties, made from 2mm Dyneema® SK78 for exceptional strength and minimal stretch.
Designed for easy rigging and a secure hold, this kit is a must-have for Sunfish sailors looking for reliability on the water!

SUNFISH SAIL TIES

Laser Performance

Sunfish Quick Adjust Lever

Murrays Part# 68-90563

Easily adjust the position of your lower boom with this quick-adjust lever. No wrenches required!
Features:
Tool-free adjustment for convenience
Allows quick boom positioning
A must-have for efficient and hassle-free sail tuning.

SUNFISH QUICK ADJUSTER LEVER

Laser Performance

Harken Becket Roller

Murrays Part# 28-HSB26

Replacement becket roller for Harken blocks measures 3/4" long by 1/2" diameter with 1/4" hole.

HARKEN BECKET ROLLER

Harken 40mm Fiddle Block - Swivel

Murrays Part# 28-2655

Harken's Carbo fiddle block features high-load ball bearings with fitted races for low-friction operation. The 40 mm fiddle is an excellent choice for a Hobie® 20 barber hauler block, for 3:1 and 4:1 tackles on dinghy vangs and mainsheets, as well as for controls such as cunninghams and internal boom outhauls on larger boats.

HARKEN 40MM FIDDLE BLOCK-SWIVEL

HARKEN 57MM TRIPLE BLOCK-SWIVEL

The Harken 2149 40mm T2 tie-on block eliminates the need for shackles, posts, swivels, etc. It is ultra-lightweight and sized like a bullet-block.

HARKEN 40MM T2 SOFT-ATTACH BLOCK

HARKEN 40MM T2 LOOP SOFT-ATTACH BLOCK

Harken 57mm Ratchet Block-Swivel

Murrays Part# 28-2135

Harken 57mm Ratchet Block With Swivel and Switch allow sailors to hand-hold loaded lines and offer balance between holding power and controlled easing. The on/off switch operates from both sides.

Standard grip: medium/light air; 10:1 holding power

HARKEN 57MM RATCHET BLOCK-SWIVEL

Previous 1 … 25 26 27 28 29 … 57 Next

Recently viewed

All Sailing Parts