All Sailing Parts

All Sailing Parts

2261 products

    Everything Nacra, Prindle, Hobie and a few more fun odds and ends.

    2261 products
    Screw RHMS 1/4-20 X 1" Murrays Part# 50-8030211 Hobie® factory replacement round head machine screw measures 1/4-20 x 1". Measurements are diameter and threads per inch times grip length. Applications: Hobie 18 - Shroud anchor plate screw
    SCREW RHMS 1/4-20 X 1"
    Hobie
    Rudder Gudgeon Murrays Part# 56-1016 Rudder gudgeon for Prindle 15, 16 and 18 Nacra Sailing factory item# 30993
    NACRA RUDDER GUDGEON
    NACRA
    H16 Adjustable Lower Rudder Casting Murrays Part# 50-10412011 Black adjustable lower rudder casting for Hobie® 16 is a factory replacement part. Includes rudder cam. This is the standard lower casting on Hobie 16 beachcats since 1983. There is an adjustable screw at the base of the casting to help adjust rudder rake and a slightly different casting shape than the earlier rudder castings. The spring length is also longer on these than pre '83 castings.
    Hobie 16 ADJUSTABLE LOWER RUDDER CASTING
    Hobie
    Out of Stock
    H16 Rudder Casting Cam Pin 1/4" Murrays Part# 50-10470000 Hobie® factory replacement flare cam pin for Hobie® 16 rudder casting is 1/4" diameter. Flaring this pin can be difficult, so Murrays recommends using #01-2051 sister screws in place of this stock pin.
    H-16 RUDDER CAST CAM PIN 1/4"
    Hobie
    Out of Stock
    H18 Rudder Cam Pin Murrays Part# 50-50312301 Hobie® factory replacement rudder cam pin for Hobie 17, 18, 20, 21SC and 21SE as well as older Wave and Getaway models.
    H-18 RUDDER CAM PIN
    Hobie
    Roller Furler Darby Ring (Large) Murrays Part# 50-8062511 Hobie® factory replacement large darby ring for roller furler. Hobie Part# 8062511
    ROLLER FURLER DARBY RING (LARGE)
    Hobie
    H17 Mast Base Washer Murrays Part# 50-52411001 Replacement washer for Hobie 17 mast base assembly. Hobie Part# 52411001
    H-17 MAST BASE WASHER
    Hobie
    Out of Stock
    H14 Black Mesh Trampoline Murrays Part# 50-10970055 The H14 black mesh trampoline is a trampoline for a Hobie 14. It is heat-welded for easy maintenance and a long life. Mesh allows wind and water to pass through, so you're not sitting in a puddle. Includes halyard pocket. Order lacing separately. Hobie Part# 10970055
    H-14 BLACK MESH TRAMPOLINE
    Hobie
    H20 Boom Retainer Clip Murrays Part# 50-8060151 Hobie® factory replacement boom retainer clip for Hobie 20. Hobie Part# 8060151
    H-20 BOOM RETAINER CLIP
    Hobie
    Bolt Socket Head 3/8-16 X 2.50" Murrays part# 50-8040521 Hobie® factory replacement 3/8-16 x 2.50" socket head bolt is used on Getaway wing and Hobie® 18 rear inboard support. Hobie Part# 8040521
    BOLT 3/8-16 X 2.50"
    Hobie
    Bolt Hex 5/16-18 X 1" Murrays Part# 50-8040171 Hobie® factory hex head bolt measures 5/16-18 x 1". Used on #07-1953 Tiller Connector for Hobie® 20. Hobie Part# 8040171
    BOLT HEX 5/16-18 X 1"
    Hobie
    Tracker Hinge Upright Murrays Part# 007-1054 The standard replacement hinge upright for the tracker on all Hobie® 14, 16 and newer 17's. Fits: Hobie Getaway Main Traveler Car Hobie Cat® Part# 11840100
    TRACKER UPRIGHT HINGE
    Hobie
    TRACKER HINGE PIN
    Hobie
    Stop Sleeve 3/32" Murrays Part# 002-1031 A stop sleeve grips a single wire to provide a "stop" for halyard hooks or trapeze handle, etc. A special "J" size opening on a nicropress tool is required for closing 3/32" and 1/8" stops; 5/32" stop requires "M" opening. Use this page to order item numbers 02-1031 3/32", 02-1041 1/8", 02-1051 5/32" and 02-1061 3/16" stop sleeves.
    STOP SLEEVE 3/32"
    Misc
    Heavy Duty Swivel with Aluminum Cam Roller Fairlead Murrays Part# 25-3020 Swivel cam cleats are ideal for main traveler control and up-release jib cleating systems. This is a Murrays product that features an Aluminum Harken 150 cam cleat, and HD swivel plate and a HD roller fairlead. The advantage to the roller fairlead is that it can take a larger line diameter, up to 1/2", and handle heavy loads at extreme angles. Making it ideal for larger catamarans and sailors in high wind areas.
    ROLLER FAIRLEAD KIT (SWIVEL)
    Murrays Sports
    Nut Nylock 3/8-16" Stainless Steel Murrays Part# 19-2524 Stainless 3/8-16 hex nut with nylock insert will not rust or work loose if properly installed. Used on newer (1994) Hobie 16 pylon bolt. Hobie Part# 8050521
    NUT NYLOCK 3/8-16" (SS)
    Misc
    Nut Nylock #10-32 Stainless Steel Thick Murrays Part# 19-2515 Mainsheet block replacement nut. The stainless hex nut with nylock insert will not rust or work loose if properly installed. Fits Hobie Main Traveler Car. Fits Hobie Tiller Hinge Screw. Fits Hobie Masthead Sheave Screw H16 Hobie Getaway Compare to Hobie Part Number 8050201
    NUT NYLOCK #10-32 (SS) THICK
    Misc
    Ronstan Figure 8 Trapeze Ring Murrays Part# 25-3610 Original equipment for Hobie® trapeze systems, the figure 8 ring is 6" long with 1-1/2" rings.
    RONSTAN FIGURE 8 TRAPEZE RING (EACH)
    Ronstan
    Clamcleat Racing Mini Murrays Part# 27-1222 The CL222 Racing Mini aluminum Clamcleat® is small, neat and lightweight and can be fixed to horizontal or vertical surfaces. It is a very useful cleat for small dinghies, and is also used in kiteboarding on bars and for adjusting the 5th line on kites.
    CLAMCLEAT RACING MINI
    Clamcleat
    Bolt Hex Head 5/16-18 X 4.50" (Stainless Steel) Murrays Part# 19-2237 Stainless steel hex head bolt for Prindle mast rotation control arm. Use #19-2520 nylock nut. This bolt is a replacement for item #56-F110 Comparable to Hobie Part# 8040211
    BOLT HEX HEAD 5/16-18 X 4.50" SS
    Misc
    EYE STRAP KIT - 2072
    Murrays Sports
    GoPro Mount with Fastener for Gath Helmet Murrays Part# 52-2303 The GoPro Camera Mount gives you the convenience of easy, clip-on/clip-off camera mounting on a Gath helmet. The kit combines the GoPro camera base plate with a Gath customized, rust-proof helmet screw for an easy, do-it-yourself, convenient, top mounting to provide a secure, well-balanced helmet cam. All model GoPro cameras easily clip on or off.
    GOPRO HELMET MOUNT WITH FASTENER
    Gath
    Mainsheet for a Hobie Wave sailboat made of Dacron Spun Braid. Dacron Spun Braid was the OEM sheeting line for Hobie up into the late 90s. Dacron Spun Braid has excellent grip, cleats well and is easy on the hands. 35' of 3/8 Soft Dacron Spun Braid with a strong polyester blend core. This was the stock Hobie mainsheet line from the 80s and 90s. Very little stretch, soft hand, easy cleating.
    Mainsheet for a Hobie Wave sailboat made of Dacron Spun Braid. Dacron Spun Braid was the OEM sheeting line for Hobie up into the late 90s. Dacron Spun Braid has excellent grip, cleats well and is easy on the hands. 35' of 3/8 Soft Dacron Spun Braid with a strong polyester blend core. This was the stock Hobie mainsheet line from the 80s and 90s. Very little stretch, soft hand, easy cleating.
    H WAVE MAINSHEET
    Murrays Sports
    T-9 Boeshield 4oz was developed by The Boeing Company for lubrication and protection of aircraft components. It is a combination of solvents, lubricants, and waxes designed for penetration, moisture displacement, lubrication and protection. Boeshield T-9® dries to a thin waxy film that clings to metal for months. It will loosen rusty and corroded parts and is safe on paints.
    T-9 BOESHIELD 4oz
    T-9
    Out of Stock
    2182 Ronstan 3/16 Sailmakers Thimble is a great option for DIY dyneema rigging projects. The closed thimble prevents chaffing on your dyneema.
    3/16 Sailmakers Thimble
    Ronstan
    Coffee Marine Bridle Vane XL Murrays Part# 001-7080 compare to Hobie 7703
    XL Bridle Vane - Wave & 17
    Murrays Sports
    Out of Stock
    Coffee Marine Bridle Vane Replacement Vane Murrays PN 001-7050-G Sensitive, rigid and light! The classic bridle vane for the Hobie 16 and other racing cats. These are made in our warehouse and will fit the Hobie Bridle Vane assembly or the classic Coffee Marine assemblies. The Coffee Marine vanes are slightly more rigid than the Hobie wind vane, making them last longer and less likely to flap in the wind. Compatible with Hobie Bridle vanes. Hobie part number CM7703
    Coffee Marine Bridle Vane Replacement Vane
    Murrays Sports
    EASY RIGG TOOL GREEN
    Murrays Sports
    Sale
    Wave Batten Set Murrays Murrays Part# 30-3012 The Murrays Wave Batten Set are the same specs as the OEM version except yellow and with white batten caps. This set includes 5 battens with black OEM luff caps and white TrenTec Leech caps. The bottom three battens are Hobie Main style battens and the top two battens are Hobie Jib style battens. Hobie Part# 38016001
    FWC GP 2026 WAVE MAIN BATTEN SET
    Murrays Sports
    Save $51
    1/4" FAST SHACKLE
    Murrays Sports
    Sale
    H-16/18 Jib Halyard Block Assembly Used
    Hobie
    Save $24.99
    Robline Small Soft Shackle - 4mm SK78 Murrays Part# 21-DSH9 The Robline Small Soft Shackle is a great alternative to the metal shackle, with no clevis pins to loose in the water or sand. Soft shackles are also very easy on the boat as they are soft and flexible Quick and easy way to attach jib clew blocks to the jib and the main sheet blocks to the main sail.
    ROBLINE SMALL SOFT SHACKLE-9MM SK78
    Robline
    ROBLINE SMALL SOFT SHACKLE-2.5MM SK78
    Robline
    Mast Base Hinge Plate Murrays Part# 56-6816 Mast base hinge plate for Prindle 18, 18-2 and 19 Performance Sports factory item# 6816
    PRINDLE MAST BASE HINGE PLATE
    NACRA
    N5.2/5.8 Tiller Arm with Angle 31" Murrays Part# 56-5551 31" tiller arm with angle for Nacra 5.2 and 5.8. Nacra Sailing factory Part# 30153
    NACRA 5.2/5.8 TILLER AREM WITH ANGLE 31"
    NACRA
    Rudder Kick-Up Stop Murrays Part# 56-4518 The Nacra Rudder Kick-Up Stop is used on the Nacra 4.5/450, 5.0, 5.2, 5.5SL, 5.7, 5.8NA, 6.0NA, 5.5UNI and 18SQ. Performance Sports factory item# 4518
    NACRA RUDDER KICK-UP STOP
    NACRA
    Replacement part for the adjustable trapeze system found on modern NACRA catamarans. Applications: Nacra 460, Nacra 500, Nacra 570, Nacra 16, NACRA 17, Nacra F18 Infusion, Nacra F20 Carbon, Nacra F20 Carbon FCS NACRA Part # 30938
    NACRA TRAPEZE STOP
    NACRA
    Out of Stock
    N-15 MAST COVER
    Murrays Sports
    Nacra Boom Endcap Murrays Part# 56-31166 The boom endcap 40mm x 2mm, this is the round endcap used on all standard boom (non decksweeper).
    NACRA BOOM ENDCAP
    NACRA
    Out of Stock
    Nacra Tiller Arm Endfitting Murrays Part# 56-30001 The endfitting of the tiller arm. This article fits on all Nacra tiller arms. This is a standard item on the rudder system upper.
    NACRA TILLER ARM ENDFITTING
    NACRA
    Recently viewed