All Sailing Parts

2197 products

    Everything Nacra, Prindle, Hobie and a few more fun odds and ends.

    2197 products
    H16 Rudder Casting Cam Pin 1/4" Murrays Part# 50-10470000 Hobie® factory replacement flare cam pin for Hobie® 16 rudder casting is 1/4" diameter. Flaring this pin can be difficult, so Murrays recommends using #01-2051 sister screws in place of this stock pin.
    H-16 RUDDER CAST CAM PIN 1/4"
    Hobie
    Rudder Arm Slotted P15/16/18 Murrays Part# 56-5004 22.5" Anodized slotted rudder arm fits all Prindle 15, 16 and 18 Nacra Sailing factory item #30430
    NACRA SLOTTED RUDDER ARM
    NACRA
    Roller Furling Darby Ring (Small) Murrays Part# 50-8062501 Hobie® factory replacement small Darby ring for roller furler. Hobie Part# 8062501
    ROLLER FURLING DARBY RING (SMALL)
    Hobie
    H20 Boom Outhaul Car Murrays Part# 50-40230001 This is the outhaul car plate for the Hobie Miracle 20. It does not include the rollers or bearings. Hobie discontinued the traveler car and we are producing one to the same specifications. Hobie part# 40230001
    H-20 BOOM OUTHAUL CAR
    Hobie
    Nut Nylock 5/16-18 Low Profile Murrays Part# 50-8050331 Hobie® factory replacement low-profile 5/16-18 nylock nut.  Fits EZ Loc Upper and Lower Rudder Housing Hobie Bravo, Getaway and Wave. Hobie Part# 8050331
    NUT NYLOCK 5/16"-18 LOW PRO
    Hobie
    H17 Mast Halyard Hook Murrays Part# 50-50403011 Hobie® factory mast halyard hook for Hobie® 17. Hobie Part# 50403011
    H-17 MAST HALYARD HOOK
    Hobie
    Getaway Luff Track Murrays Part# 50-37611151 Replacement luff track for the Hobie Getaway. 102" Hobie Part# 37611150, 37611151
    GETAWAY LUFF TRACK
    Hobie
    Jib Traveler Car Plate Only Murrays Part# 50-2524001 Hobie® factory replacement jib traveler car plate. Can be used on port or starboard side of the boat.
    JIB TRAVELER CAR PLATE ONLY
    Hobie
    H18 Halyard Lock (Comptip) Murrays Part# 50-61610101 Halyard hook for Hobie 18 comptip mast assembly. Hobie Part# 61610101
    H-18 HALYARD HOOK (COMPTIP)
    Hobie
    H16 Jib Car Slide Only with Wheels Hobie factory jib car slide for Hobie 16 with integrated jib track (standard equipment since late 2005). Hobie part number 25243003
    H-16 JIB CAR SLIDE ONLY WITH WHEELS
    Hobie
    H20 Gudgeon Murrays Part# 50-40101301 Hobie 20 replacement gudgeon for the Hobie® 20. Use #12-24 x 1" PPHMS-P screws and 12-24 nylock hex nuts. Hobie Part# 40101301
    H-20 GUDGEON
    Hobie
    Out of Stock
    H16 Gudgeon Casting Murrays Part# 50-50102011 Standard on current production Hobie 16s, these die cast aluminum gudgeons are now available for your Hobie 16. Their one piece construction and plastic bushed pin holes guarantee pin hole alignment, reducing rudder pin wear, slop and drag. Die cast aluminum construction Standard on all Hobie 16 catamarans Uses 8x #8030402 screw for installation (sold separately)
    H-16 GUDGEON CASTING
    Hobie
    H16 Dolphin Striker Post Murrays Part# 50-20140001 Hobie® factory replacement dolphin striker post fits all Hobie® 16 mast steps (older and newer)
    H-16 DOLPHIN STRIKER POST
    Hobie
    H18 Compression Sleeve Murrays Part# 50-61490000 Hobie® factory replacement compression sleeve for mast of Hobie 18.
    H-18 COMPRESSION SLEEVE
    Hobie
    H20 Boom Retainer Clip Murrays Part# 50-8060151 Hobie® factory replacement boom retainer clip for Hobie 20. Hobie Part# 8060151
    H-20 BOOM RETAINER CLIP
    Hobie
    Block Hanger H20 Murrays Part# 50-40760001 Hobie® factory replacement block hanger for Hobie® 20. Hobie part# 40760001
    H-20 BOOM BLOCK HANGER
    Hobie
    TURNBUCKLE COMPLETE 5/32"
    Misc
    Out of Stock
    Tracker: Bottom Roller (Post-1993) Murrays Part# 007-0112 Bottom roller with rivets for the tracker car on 1993 and later Hobie® 14, 16 and 17 's. This part allows you to rebuild your existing Hobie Traveler car by just replacing the track rollers and keeping the top half. This part can be installed on older boats if the matching Deep Track is installed as well. Fits Hobie Getaway Traveler Car. Hobie Cat Part# 112
    TRACKER BOTTOM ROLLER (POST 93)
    Hobie
    Out of Stock
    HOBIE TRACKER CAR COMPLETE NEW (POST93)
    Hobie
    Stop Sleeve 3/32" Murrays Part# 002-1031 A stop sleeve grips a single wire to provide a "stop" for halyard hooks or trapeze handle, etc. A special "J" size opening on a nicropress tool is required for closing 3/32" and 1/8" stops; 5/32" stop requires "M" opening. Use this page to order item numbers 02-1031 3/32", 02-1041 1/8", 02-1051 5/32" and 02-1061 3/16" stop sleeves.
    STOP SLEEVE 3/32"
    Misc
    Ronstan Small Becket Block Murrays Part# 21-0188 Use this Ronstan single block with becket for 3:1 system for boom vangs or righting aids. 1/4" line capacity. SWL 660 lbs.
    RONSTAN SMALL BECKET BLOCK
    Ronstan
    Nut Nylock 3/8-16" Stainless Steel Murrays Part# 19-2524 Stainless 3/8-16 hex nut with nylock insert will not rust or work loose if properly installed. Used on newer (1994) Hobie 16 pylon bolt. Hobie Part# 8050521
    NUT NYLOCK 3/8-16" (SS)
    Misc
    Nut Nylock #10-32 Stainless Steel Thick Murrays Part# 19-2515 Mainsheet block replacement nut. The stainless hex nut with nylock insert will not rust or work loose if properly installed. Fits Hobie Main Traveler Car. Fits Hobie Tiller Hinge Screw. Fits Hobie Masthead Sheave Screw H16 Hobie Getaway Compare to Hobie Part Number 8050201
    NUT NYLOCK #10-32 (SS) THICK
    Misc
    H20 Diamond Wire Double without Turnbuckle Murrays Part# 002-0795-20 Diamond wire double (includes both sides) for Hobie® 20 is constructed to factory specifications. Without turnbuckle. Compare to Hobie Cat® Part# 41750001
    H-20 DIAMOND WIRE DOUBLE WITHOUT TURNBUCKLE
    Murrays Sports
    H14 Turbo Jib Block Wire Murrays Part# 002-0124-80 Jib block wire for Hobie® 14 Turbo is constructed to factory specifications. Older under tramp version: requires grommets in the trampoline for jib blocks to connect to the Jib block wire thru the trampoline. And also requires a Hobie 14 shroud tang at the base of the shrouds to connect to. Turbo typically refers to the Hobie Factory Version that features a Hobie Roller furling drum, bridles connect to the drum with forks, and an under tram
    H-14 TURBO JIB BLOCK BLACK WIRE
    Murrays Sports
    H14 Turbo Upper Forestay with Swivel Murrays Part# 002-0134-01 Upper forestay with swivel for Hobie® 14 Turbo is constructed to factory specifications. Turbo refers to the Hobie Factory Version that features a Hobie Roller furling drum, bridles connect to the drum with forks, and an under tramp jib block wire. Compare to Hobie Cat® #10810010
    H-14 TURBO UPPER FORESTAY WITH SWIVEL
    Murrays Sports
    Ronstan Figure 8 Trapeze Ring Murrays Part# 25-3610 Original equipment for Hobie® trapeze systems, the figure 8 ring is 6" long with 1-1/2" rings.
    RONSTAN FIGURE 8 TRAPEZE RING (EACH)
    Ronstan
    Clamcleat Racing Mini Murrays Part# 27-1222 The CL222 Racing Mini aluminum Clamcleat® is small, neat and lightweight and can be fixed to horizontal or vertical surfaces. It is a very useful cleat for small dinghies, and is also used in kiteboarding on bars and for adjusting the 5th line on kites.
    CLAMCLEAT RACING MINI
    Clamcleat
    Bolt Hex Head 5/16-18 X 1.5" Murrays Part# 19-2229 Use this stainless steel, 5/16-18 x 1-1/2" hex head bolt as beam strap bolt for Nacra. Substitute for Nacra Sailing factory item #30358. This bolt is also used to hold the cam stop plate on a Hobie Rudder Upper casting. Replaces Hobie Cat® Part# 8040301 and Murrays Part# 56-F164
    BOLT HEX HEAD 5/16-18 X 1.5"
    Misc
    Bolt Hex Head 1/4-20 X 3.5" Stainless Steel Murrays Part# 19-2224 Stainless steel hex head bolt measures 1/4-20 x 3-1/2" Pylon Bolt for newer H16 Hobie Part# 8040361
    BOLT 1/4-20 X 3.5" (SS)
    Misc
    Sale
    H-16/18 Jib Halyard Block Assembly Used
    Hobie
    Save $24.99
    NACRA FORWARD SPREADER BAR
    NACRA
    O'Pen Skiff Tiller Extension 70cm Murrays Part# 65-31695 Stick of 70 cm for the O'pen Skiff. Non-slip coating. Tahe Part# 31695
    O'PEN SKIFF TILLER EXTENTION 70CM
    Tahe Outdoors
    SK78 Dyneema Whipping Twine Murrays Part# 21-WD1R Dyneema® whipping twine excels mostly due to its high breaking loads and smooth surface. It is easy to handle and requires no additional waxing. Specifications: Material: Dyneema® SK78 Diameter: 1 mm Length: 50 m Color: Red
    SK78 DYNEEMA WHIPPING TWINE
    Robline
    Robline Dinghy Star Pro - Grand Prix Spinnaker single launch line system Murrays Part# 39-1504BR Robline Dinghy Star Pro - Cover utilizes PBO and Dyneema SK78 for extreme abrasion resistance and a Dyneema SK99 core for minimal elongation. The PBO and Dyneema combination reduces friction in single line spinnaker launch systems, making it significantly faster and easier to launch and douse the spinnaker. Offers the highest abrasion resistance and least stretch, perfect for fast skiff and dingh
    DINGHY STAR PRO 4MM
    Robline
    Mast Base Hinge Plate Murrays Part# 56-6816 Mast base hinge plate for Prindle 18, 18-2 and 19 Performance Sports factory item# 6816
    PRINDLE MAST BASE HINGE PLATE
    NACRA
    Out of Stock
    Nacra Inter 20 Tiller Arm Murrays Part# 56-4583 Tiller arm for the Inter 20. Nacra Part# 30124
    NACRA INTER 20 TILLER ARM
    NACRA
    Out of Stock
    N5.5/5.8/P18.2 Jib Track 18" Murrays Part# 56-1910 Nacra Jib Track 18" Standard on Nacra 5.5SL, 5.7, and 5.8 as well as Prindle 18-2 and 19.
    NACRA 5.5/5.8/P18.2 JIB TRACK 18"
    NACRA
    Rudder Kick-Up Stop Murrays Part# 56-4518 The Nacra Rudder Kick-Up Stop is used on the Nacra 4.5/450, 5.0, 5.2, 5.5SL, 5.7, 5.8NA, 6.0NA, 5.5UNI and 18SQ. Performance Sports factory item# 4518
    NACRA RUDDER KICK-UP STOP
    NACRA
    Nacra Compression Sleeve Murrays Part# 56-2506 The Nacra/Inter Compression Sleeve slips over the Nacra/Inter mast support rod between the nuts and washers to protect the front crossbar. The anodized aluminum tube measures 3-3/4" long x 5/8" ID. Performance Sports Factory item #2506
    NACRA COMPRESSION SLEEVE
    NACRA
    Recently viewed