All Sailing Parts

All Sailing Parts

2262 products

Everything Nacra, Prindle, Hobie and a few more fun odds and ends.

2262 products

Sort

Hi-Low Trapeze Adjustment Kit with Handle

Murrays Part# 001-1140

Simple and adjustable on the fly, with constant upward tension on the trapeze ring and separate on-the-wire height adjustment. Easy to hook up and hike out with no initial adjustments. Very low stretch lines and Ronstan® turning blocks and aluminum Clamcleats® with roller fairleads for 2:1, easy-pull, easy-release height adjustment. Crew can move fore or aft while maintaining proper height. Constant, smooth-action tension on the trapeze ring

HIGH-LOW TRAPEZE ADJUSTMENT KIT WITH HANDLE

Dolphin Striker Eye Bolt H14
Murrays PN 001-0106
This part is used as part of the Murrays H14 Dolphin Striker Kit.
Replacement stainless steel post for #01-2083 dolphin striker for Hobie® 14.
19-2524 nylock nut is needed and not included with this part.

H-14 DOLPHIN STRIKER EYE BOLT

N-5.0 MAIN HALYARD WITH SHACKLE

6" TWIST-N-SEAL HATCH

H20 Rudder Bumper

Murrays Part# 006-190807

The Rudder Bumper Hobie 20 is the wedge that mounts under the the lower casting on a Hobie 20 to prevent the rudders from turning too far into the hull and risking the tiller x-bar inverting. This also prevents stress on the hulls from the rudder casting slamming into it. This part mounts with a bolt and nut rather than a course thread screw like the original part.

H-20 RUDDER BUMPER

HOBIE HALYARD SHACKLE

Replacement Hobie halyard shackle for Hobie cat main halyards. Used on the Hobie Wave, Getaway, 14, and 16.

The keeper pin is contained so you can't drop the pin in the water or sand and loose it.

Hobie part number 10670000

HOBIE HALYARD SHACKLE

WASHER STAINLESS STEEL 1/4 x 1/2 x .032"

Hobie EZ Loc Lower Rudder Housing Tube Rivet

Murrays Part# 50-50313301

Rivet for the lower rudder housing on Hobie Bravo, Getaway and wave EZ Loc Systems. 

Hobie Part# 50313301

HOBIE EZ LOC LOWER RUDDER HOUSING TUBE RIVET

Hobie EZ Loc Rudder Housing

50-50313001

EZ Loc Rudder Housing for Hobie Bravo

EZ Loc Rudder Housing for Hobie Getaway

EZ Loc Rudder Housing for Hobie Wave

Hobie part number 50313001

Fits Hobie Wave and Hobie Bravo and Hobie Getaway

HOBIE EZ LOC RUDDER HOUSING

Comptip Cap Plug

Murrays Part# 50-8090900

This part is used to seal the hole in the Comptip of a Hobie cat after the expanding foam has been put in.

Hobie Part# 8090900

COMP-TIP CAP PLUG

TILLER ARM INSERT Hobie factory tiller arm insert for 1953 tiller kit. Hobie part number 40660001. Murrays.com In stock

HOBIE TILLER ARM INSERT

Screw 5/16-18 X 2.5" Socket Head

Murrays Part# 50-8032221

Hobie® factory replacement socket head screw bolt is 5/16-18 x 2-1/2". Hobie 17 and 17 Sport front and rear crossbar bolt.

Hobie Part# 8032221

SCREW 5/16 X 18 X 2.5" SOCKET HEAD

Prindle Rudder Arm Slotted P15/16/18
Murrays Part# 56-5004
22.5" Anodized slotted rudder arm fits all Prindle 15, 16 and 18
Nacra Sailing factory item #30430

PRINDLE SLOTTED RUDDER ARM

Getaway Luff Track

Murrays Part# 50-37611151

Replacement luff track for the Hobie Getaway. 102"

Hobie Part# 37611150, 37611151

GETAWAY LUFF TRACK

H16 Jib Car Slide Only with Wheels Hobie factory jib car slide for Hobie 16 with integrated jib track (standard equipment since late 2005). Hobie part number 25243003

H-16 JIB CAR SLIDE ONLY WITH WHEELS

Detent Plunger EZ Lock System
Murrays Part# 50-20492021
Hobie Cat® factory detent plunger for EZ Loc rudder assembly.
Hobie Bravo, Getaway and Wave
Hobie Part# 20492021

BRAVO/WAVE/GETAWAY DETENT PLUNGER EZ LOC SYSTEM

H16 Insignia Decal

Murrays Part# 50-22330000

Hobie® 16 sail class insignia decal is a Hobie® factory replacement item.

H-16 INSIGNIA DECAL

Comp-Tip Mast Head H16
Murrays Part# 50-20614001
Hobie® factory replacement mast head with sheaves. Use four #19-5032 6-6 rivets for installation. This is the standard Hobie Part that comes with all comptip masts on Hobie 16s.
This CompTip mast head also replaces the obsolete Hobie 16 mast head (no longer available) for all-aluminum mast. The original halyard will work if you move the halyard hook down to the appropriate height. Alternatively, a new comptip halyard #02-0273-60

H-16 COMP-TIP MAST HEAD

H16 Comp Tip Luff Track

Murrays Part# 50-20616001

Hobie® factory replacement 93" luff track for Hobie® 16 with CompTip on mast.

H-16 COMP-TIP LUFF TRACK

Block Hanger H20
Murrays Part# 50-40760001
Hobie® factory replacement block hanger for Hobie® 20.
Hobie part# 40760001

H-20 BOOM BLOCK HANGER

H18 Jib Furler Bearing (Cage)

Murrays Part# 50-61930000

Hobie® factory replacement bearing cage for Hobie® roller furler drum #50-61900000.

Hobie Part# 61930000

H-18 JIB FURLER BEARING (CAGE)

TURNBUCKLE COMPLETE 5/32"

TRACKER HINGE PIN

Tracker Car Complete (Pre-1994)
Murrays Part# 007-1050
This tracker car is the standard replacement part for all 1993 and earlier Hobie® 14, 16 and 17 main tracker traveler assemblies. Includes 2-3 rivets where required. Hobie Cat® factory item #105.

TRACKER CAR COMPLETE (PRE'94)

Heavy Duty Swivel with Aluminum Cam Roller Fairlead

Murrays Part# 25-3020

Swivel cam cleats are ideal for main traveler control and up-release jib cleating systems. This is a Murrays product that features an Aluminum Harken 150 cam cleat, and HD swivel plate and a HD roller fairlead. The advantage to the roller fairlead is that it can take a larger line diameter, up to 1/2", and handle heavy loads at extreme angles. Making it ideal for larger catamarans and sailors in high wind areas.

ROLLER FAIRLEAD KIT (SWIVEL)

Nut Nylock 3/8-16" Stainless Steel

Murrays Part# 19-2524

Stainless 3/8-16 hex nut with nylock insert will not rust or work loose if properly installed. Used on newer (1994) Hobie 16 pylon bolt.

Hobie Part# 8050521

NUT NYLOCK 3/8-16" (SS)

Mast Float Mama Getaway

Murrays Part# 007-30119

MAST FLOAT MAMA GETAWAY

Key-Ball Can't Miss Connector 

Murrays Part# 001-0142

Can't Miss handles are designed to allow the sailor to hook-up without even looking at the trapeze hook. This lightweight, extra-wide hook-up ring has a center-hold handle with molded finger ridges. Double swaged 1/8" (1x19) wire is color-coated with high pressure nylon tubing. Use this pair of connectors with Carbon Key-Hole Buckle (#01-0311), sold separately.

KEY-BALL CAN'T MISS CONNECTOR

Harken 22mm Becket Block
Murrays Part# 28-0225
Low-friction Micro blocks are compact and lightweight. They are ideal for sailboards, smaller dinghies, and lightly loaded control lines on boats of all sizes.
Harken ball bearing micro single block with becket has stainless side plates.

HARKEN 22MM BECKET BLOCK

H20 Diamond Wire Double without Turnbuckle

Murrays Part# 002-0795-20

Diamond wire double (includes both sides) for Hobie® 20 is constructed to factory specifications. Without turnbuckle.

Compare to Hobie Cat® Part# 41750001

H-20 DIAMOND WIRE DOUBLE WITHOUT TURNBUCKLE

Ronstan Figure 8 Trapeze Ring

Murrays Part# 25-3610

Original equipment for Hobie® trapeze systems, the figure 8 ring is 6" long with 1-1/2" rings.

RONSTAN FIGURE 8 TRAPEZE RING (EACH)

GoPro Mount with Fastener for Gath Helmet

Murrays Part# 52-2303

The GoPro Camera Mount gives you the convenience of easy, clip-on/clip-off camera mounting on a Gath helmet. The kit combines the GoPro camera base plate with a Gath customized, rust-proof helmet screw for an easy, do-it-yourself, convenient, top mounting to provide a secure, well-balanced helmet cam. All model GoPro cameras easily clip on or off.

GOPRO HELMET MOUNT WITH FASTENER

Coffee Marine Bridle Vane Replacement Vane

Murrays PN 001-7050-G

Sensitive, rigid and light! The classic bridle vane for the Hobie 16 and other racing cats. These are made in our warehouse and will fit the Hobie Bridle Vane assembly or the classic Coffee Marine assemblies. The Coffee Marine vanes are slightly more rigid than the Hobie wind vane, making them last longer and less likely to flap in the wind.

Compatible with Hobie Bridle vanes.

Hobie part number CM7703

Coffee Marine Bridle Vane Replacement Vane

EASY RIGG TOOL BLUE

EASY RIGG TOOL GREEN

Getaway Wings Trampoline - Turquoise
Murrays Part# 30-3092B
Our heavy-duty Textilene 90 eplacement wing trampolines (covers) to fit your Hobie® Getaway catamaran wings are very well built with these unique Features:
Made of high-quality and very durable PVC coated 1000 Denier Polyester
Textilene 90 trampoline mesh
Excellent UV and microbial resistance
Sewn with large size V-138 UV-stabilized polyester thread
One-year warranty against defects in materials and workmanship
37971058

GETAWAY WING TRAMPOLINES - BLUE

HOBIE GETAWAY AFT BLUE MESH TRAMPOLINE <2017

Wave Batten Set Murrays

Murrays Part# 30-3012

The Murrays Wave Batten Set are the same specs as the OEM version except yellow and with white batten caps. This set includes 5 battens with black OEM luff caps and white TrenTec Leech caps.
The bottom three battens are Hobie Main style battens and the top two battens are Hobie Jib style battens.

Hobie Part# 38016001

FWC GP 2026 WAVE MAIN BATTEN SET

NEW O'Pen Skiff Rudder Assembly

Murrays PN 65-31784

O'Pen OEM part #31784

The NEW O'Pen Skiff Rudder Assembly for the O'Pen Skiff. The O'pen Skiff is formerly known as the O'Pen Bic. The NEW rudder assembly which was released in the August of 2025 has been redesigned to break less tiller end plugs and last longer. You can spot the difference in the rudder housing as it sits against the transom of the boat. The new version has a smaller gap between the rudder housing and the transom. It also feathers a l

NEW O'Pen Skiff Rudder Assembly

Murrays PN 65-31784

O'Pen OEM part #31784

The NEW O'Pen Skiff Rudder Assembly for the O'Pen Skiff. The O'pen Skiff is formerly known as the O'Pen Bic. The NEW rudder assembly which was released in the August of 2025 has been redesigned to break less tiller end plugs and last longer. You can spot the difference in the rudder housing as it sits against the transom of the boat. The new version has a smaller gap between the rudder housing and the transom. It also feathers a l

O'PEN SKIFF RUDDER ASSEMBLY - NEW

H-16/18 Jib Halyard Block Assembly Used

Previous 1 … 22 23 24 25 26 … 57 Next

Recently viewed

All Sailing Parts