All Sailing Parts

2197 products

    Everything Nacra, Prindle, Hobie and a few more fun odds and ends.

    2197 products
    Cat Trax Washer & Cotter Pin Kit Murrays Part# 13-1401-7 Kit includes: Replacement washers and cotter pins for two Cat Trax beach wheels.
    CAT TRAX WASHER & COTTER PIN KIT
    Cat Trax
    Out of Stock
    Power Righting System I Murrays Part# 13-4101
    POWER RIGHTING SYSTEM I
    Murrays Sports
    V-Ring Seal Hub Murrays Part# 005-0761-03
    OXEN BLOCK V-RING SEAL HUB
    Oxen
    O-Ring Seal (Center Screw) Murrays Part# 005-0761-02 REBUILDING OXEN BLOCKS Murrays is a complete repair facility for Oxen (aka IFL, Ochsen, Ocean) blocks. Just send us your block and we will rebuild it for an average cost of $60.00 plus parts and shipping. Some individuals have had success repairing their own blocks, but we have had many blocks sent to us in pieces when others have failed.
    OXEN BLOCK O-RING SEAL(CENTER SCREW)
    Oxen
    CHANNEL INSERT M4 - .7mm with SCREW
    Misc
    Inter 20 Forestay 5/32" Black Wire Murrays Part# 002-5445-12 Forestay for Inter 20 (without roller furling jib) is constructed of 5/32" black-coated wire to factory specifications.
    NACRA INTER 20 FORESTAY 5/32" BLACK WIRE
    Murrays Sports
    N5.2 Forestay 5/32" Black Wire Murrays Part# 002-4245-12 Forestay for Nacra 5.2 is constructed to factory specifications with 5/32" black-coated wire.
    N-5.2 FORESTAY 5/32" BLACK WIRE
    Murrays Sports
    N5.2 Shroud 5/32" Roller Swaged Murrays Part# 002-4205-12  Single black shroud for Nacra 5.2 is hydraulically swaged to be clean and strong. Constructed to factory specifications. Compare to Nacra product #9536
    N-5.2 SHROUD 5/32" BLACK WIRE ROLLER SWAGED
    Murrays Sports
    P19 Upper Forestay 5/32" Bare Wire Murrays Part# 002-2435-00 Bare upper forestay for Prindle 19 is constructed to factory specifications.
    PRINDLE 19 UPPER FORESTAY 5/32" BARE WIRE
    Murrays Sports
    Prindle bridle wire
    PRINDLE 19 BRIDLE 5/32 BK
    Murrays Sports
    P19 Shroud 5/32" Black Wire Roller Swaged Murrays Part# 002-2405-12 Single black shroud (sidestay) for Prindle 19 is hydraulically swaged for a cleaner, stronger shroud. Constructed to factory specifications.
    PRINDLE 19 SHROUD 5/32" BLACK WIRE ROLLER SWAGED
    Murrays Sports
    P16 Upper Forestay 1/8" Bare Wire Murrays Part# 002-2234-00 Upper forestay for Prindle 16 is constructed of bare 1/8" wire to factory specifications.
    PRINDLE 16 UPPER FORESTAY 1/8" BARE WIRE
    Murrays Sports
    Prindle 16, P18 Jib Block Wire Murrays Part# 002-2224-00 Jib block wire for Prindle 16 or 18 is constructed to factory specifications. A swaging tool is needed for installation.
    PRINDLE 16/18 JIB BLOCK WIRE
    Murrays Sports
    H18SX Forestay 5/32" Black Wire Murrays Part# 002-0645-12 Black forestay for Hobie® 18SX is constructed to factory specifications. Compare to Hobie Cat® Part# 68814501
    H-18SX FORESTAY 5/32" BLACK WIRE
    Murrays Sports
    H17 Sport Jib Halyard with Shackle Murrays Part# 002-0386-00 Jib halyard with shackle for Hobie® 17 Sport is constructed to factory specifications. Compare to Hobie Part# 52661001
    H-17 SPORT JIB HALYARD WITH SHACKLE
    Murrays Sports
    H-17 SPORT BRIDLE 5/32 BK​ Murrays PN 002-0315-22​ One bridle for the Hobie® 17 Sport (with jib) is constructed of black-coated, 5/32" 1x19 to factory specifications. Compare to Hobie 52500201.
    H-17 SPORT BRIDLE 5/32" BLACK WIRE
    Murrays Sports
    Rudder Pins H17/18 (Nylon) Murrays Part# 001-4271 Nylatron rudder pins are sacrificial for use in the surf (they'll break before your rudder system does) and should be inspected often for wear. These universal 3/8" x 9-1/4" nylon rudder pins are suited for all Hobie® 17/18/Wave rudder castings. Compare to Hobie Cat® #5052 fiberglass rudder pins (pair).
    RUDDER PINS H-17/18 PR (NYLON)
    Murrays Sports
    Quick-Release Convenience Package: H16 Murrays Part# 001-3231 This package makes set-up and take-down of your Hobie 16® more convenient. Kit includes: One #18-4R125 Quick Release Pin for hiking stick to crossbar connection. One #18-3M075L Quick Release Pin with Lanyard for mainsheet block to traveler car connection. One #21-1032 Quick Twist Halyard Shackle for jibsheet blocks to jib clew boom to mast connection. One #21-1155L Toggle Pin with Lanyard for forestay to adjuster connection. Four #01-0127 Car
    H-16 QUICK RELEASE CONVENIENCE PACKAGE
    Murrays Sports
    Telescoping Paddle 20" to 45" Murrays Part# 001-1303 Compact paddle power made tough for years of hard use. The paddle has a T-Grip handle and extends from 20" to 45". The bright orange blade doubles as a signaling device. Paddles are required by law in many states for small boats and personal watercraft. Hobie Cat® uses item #3091 for this paddle.
    TELESCOPING PADDLE 20" TO 45"
    Davis
    Hobie Tiller End Cap Murrays Part# 50-10560000 Replacement end cap for Hobie tillers.
    HOBIE TILLER END CAP
    Hobie
    Out of Stock
    Hobie Getaway Jib-Bora Bora Murrays Part# 50-379920781 Description: Bora Bora / Chartreuse colorway Jib for the Hobie Getaway made from 6 oz Dacron. Compatible with any Hobie Getaway sailboat. 6 oz heavy duty Dacron sail cloth for long term durability. Standard on all new Hobie Getaway sailboats starting in 2021. Hobie Part# 379920781
    GETAWAY JIB (BORA BORA)
    Hobie
    HOBIE HALYARD SHACKLE Replacement Hobie halyard shackle for Hobie cat main halyards. Used on the Hobie Wave, Getaway, 14, and 16. The keeper pin is contained so you can't drop the pin in the water or sand and loose it. Hobie part number 10670000
    HOBIE HALYARD SHACKLE
    Hobie
    Hobie EZ Loc Lower Rudder Housing Tube Rivet Murrays Part# 50-50313301 Rivet for the lower rudder housing on Hobie Bravo, Getaway and wave EZ Loc Systems.  Hobie Part# 50313301
    HOBIE EZ LOC LOWER RUDDER HOUSING TUBE RIVET
    Hobie
    Comptip Cap Plug Murrays Part# 50-8090900 This part is used to seal the hole in the Comptip of a Hobie cat after the expanding foam has been put in. Hobie Part# 8090900
    COMP-TIP CAP PLUG
    Hobie
    Hobie Drain Plug Screw Murrays Part# 50-8031731 This screw is used to hold the rudder housing in the back of many of the Hobie Beach cats. H14, H16, H17, H18 Hobie Part# 8031731
    HOBIE DRAIN PLUG SCREW
    Hobie
    Wave Trampoline Tension Wire Murrays Part# 50-38970051 This is the wire that goes through the side of a Hobie Wave Classic trampoline and hooks into the hooks on the hulls to tension the tramp.
    WAVE TRAMPOLINE TENSION WIRE
    Murrays Sports
    Wave Comp Tip Murrays Part# 50-38582100 Hobie® factory replacement CompTip for Wave. A CompTip is the upper section of a Hobie mast. Fiberglass and non-conductive, it was designed to prevent electrocution by contact with a high power line.
    WAVE COMPTIP
    Hobie
    Out of Stock
    Hobie Wave Trampoline Tension Strap Murrays Part# 50-38970061 Replacement strap for tensioning the Hobie Wave trampoline. Each boat requires four straps.
    WAVE TRAMPOLINE TENSION STRAP
    Hobie
    TILLER ARM SWIVEL END CAP Hobie factory tiller arm swivel end cap for Hobie 20 Miracle rudder system 1953. Hobie part number 40650001
    TILLER ARM END CAP SWIVEL
    Hobie
    TILLER ARM INSERT Hobie factory tiller arm insert for 1953 tiller kit. Hobie part number 40660001. Murrays.com In stock
    HOBIE TILLER ARM INSERT
    Hobie
    Roller Furler Darby Ring (Large) Murrays Part# 50-8062511 Hobie® factory replacement large darby ring for roller furler. Hobie Part# 8062511
    ROLLER FURLER DARBY RING (LARGE)
    Hobie
    H17 Mast Base Washer Murrays Part# 50-52411001 Replacement washer for Hobie 17 mast base assembly. Hobie Part# 52411001
    H-17 MAST BASE WASHER
    Hobie
    Out of Stock
    H14 Black Mesh Trampoline Murrays Part# 50-10970055 The H14 black mesh trampoline is a trampoline for a Hobie 14. It is heat-welded for easy maintenance and a long life. Mesh allows wind and water to pass through, so you're not sitting in a puddle. Includes halyard pocket. Order lacing separately. Hobie Part# 10970055
    H-14 BLACK MESH TRAMPOLINE
    Hobie
    H16 Insignia Decal Murrays Part# 50-22330000 Hobie® 16 sail class insignia decal is a Hobie® factory replacement item.
    H-16 INSIGNIA DECAL
    Hobie
    Clevis Pin 1/4 x .83" Murrays Part# 50-8020391 Hobie® factory clevis pin measures 1/4" diameter x .8285" grip length (shoulder to the split ring hole).
    CLEVIS PIN 1/4 X .83"
    Hobie
    Bolt Hex 5/16-18 X 1" Murrays Part# 50-8040171 Hobie® factory hex head bolt measures 5/16-18 x 1". Used on #07-1953 Tiller Connector for Hobie® 20. Hobie Part# 8040171
    BOLT HEX 5/16-18 X 1"
    Hobie
    GETAWAY WING TRAMPOLINE-BLACK
    Murrays Sports
    Key-Ball Can't Miss Connector  Murrays Part# 001-0142 Can't Miss handles are designed to allow the sailor to hook-up without even looking at the trapeze hook. This lightweight, extra-wide hook-up ring has a center-hold handle with molded finger ridges. Double swaged 1/8" (1x19) wire is color-coated with high pressure nylon tubing. Use this pair of connectors with Carbon Key-Hole Buckle (#01-0311), sold separately.
    KEY-BALL CAN'T MISS CONNECTOR
    Murrays Sports
    Harken 22mm Becket Block Murrays Part# 28-0225 Low-friction Micro blocks are compact and lightweight. They are ideal for sailboards, smaller dinghies, and lightly loaded control lines on boats of all sizes. Harken ball bearing micro single block with becket has stainless side plates.
    HARKEN 22MM BECKET BLOCK
    Harken
    H-16 3-PIECE MESH TRAMPOLINE-BLACK
    Murrays Sports
    Recently viewed