All Sailing Parts

All Sailing Parts

2266 products

Everything Nacra, Prindle, Hobie and a few more fun odds and ends.

2266 products

Sort

104" Hobie batten part number 21000001

H-16 MAINSAIL FIBERGLASS BATTEN 104"

104" Hobie batten part number 21000001

H-16 MAINSAIL FIBERGLASS BATTEN 41"

RONSTAN SWIVEL 360 WITH SMALL C-CLEAT

H14/16 Gooseneck Downhaul Ring

Murrays Part# 50-10772070

Gooseneck downhaul ring for Hobie® 14 or 16 is a factory replacement part.

H-14/16 GOOSENECK DOWNHAUL RING

303 FABRIC GUARD 16oz

303 FABRIC GUARD 16oz

The Murrays Prindle Trapeze Wires are a set of 2 black or white coated trap wires with 2 handles for trapezing. Order shock cord, harness loops and adjustment kits separately.

H17 Trapeze Wires (2)

The H17 Trapeze Wires (2) basic trapeze assembly includes two coated trapeze wires 3/32" (1x19) with nylon handles and a thimble at each end. Wires end just below handles.

Order with a trapeze adjustment kit (#01-1121 or 01-1140, purchased separately) and it will be added to wire with no installation charge.

Compare to Hobie part number 1471B.

Order shock cord, Can't miss rings/dog bones and adjustment kits separately.

Murrays PN 002-0353-01

002-0353-02

PRINDLE 16 TRAPEZE WIRES (2)

H18 Diamond Wire with Turnbuckle

Murrays Part# 002-0494-40C

Diamond wire for one side of a Hobie® 18 or 21SC is constructed with 1/8" 1x9 bare wire, stainless fork, jib roller and turnbuckles.

Also used on the the Hobie 21SC is sometimes confused with the H21SE (Special Edition). Please note that the H21SC is differentiated by its 8.5' beam, front tramp and Hobie® 18 rigging.

H18 Diamond Wire with Turnbuckle
Murrays Part# 002-0494-40C
Diamond wire for one side of a Hobie® 18 or 21SC is constructed with 1/8" 1x9 bare wire, stainless fork, jib roller and turnbuckles.
Also used on the the Hobie 21SC is sometimes confused with the H21SE (Special Edition).

Note: The H21SC is differentiated by its 8.5' beam, front tramp and Hobie® 18 rigging.
Compare to Hobie Part# 61750001

H-18 DIMOND WIRE WITH TURNBUCKLE

Ronstan S-Hook, 8mm (5/16")

Murrays Part# 21-0049

The Ronstan 8mm S-Hook features a closed eye and long return leg to ensure a positive attachment and avoid accidental release.

316 Stainless Steel, 8mm diameter bar

Ronstan Part# RF49

RONSTAN S HOOK, 8MM (5/16")

5/32" LOW STRETCH 8-STRAND 4MM

Harken 29mm T2 Soft-Attach Block

Murrays Part# 28-2146

For catamarans, this tie-on block eliminates the need for shackles, posts, swivels, etc. It is ultra-lightweight and sized like a bullet-block.

Specifications:

1-1/8" sheave diameter
330 lb. SWL
1000 lb. breaking strength
5/16" maximum line diameter

The high-strength composite T2™ is the first block with no metal shackles or rivets.

HARKEN 29MM T2 SOFT-ATTACH BLOCK

Forward XL Gust Evo Sunglasses

Forward Gust Evo Sunglasses size chart

FORWARD GUST EVO SUNGLASSES - XL

Clamcleat Kite Trapeze Hard Anodized
Murrays part# 27-0253A
This Clamcleat® aluminum rope cleat has a black hard-anodized coating that wears better than non-anodized when used with sandy line. Bottom roller. Rope size: 3/16" - 5/16" (4-8mm). Length: 3-1/2".
Clamcleat version of a Ronstan RF5121

CLAMCLEAT KITE & TRAPEZE HARD ANODIZED

Base Pad: Flat 3-Hole

Murrays Part# 25-3001

Use to mount a swivel cam to any flat surface. This adapter is not necessary when using Hobie's Offset Base Pad #07-1162.

BASE PAD: FLAT 3-HOLE

Ronstan Clearstart Race Timer 65mm
Murrays Part# 21-4030
Ronstan Clearstart™ Race Timer's are specifically designed with the racing sailor in mind, combining contemporary styling with true sailing functionality.

RONSTAN CLEARSTART RACE TIMER 65MM

Ronstan Series 20 Ball Bearing Block with Series 20 block linked at 90 Degrees

Murrays Part# 21-2028

As used on the Murrays No-Cut Hi-Low Trapeze Adjustment Kit. Precision molded Acetal sheaves run on stainless steel or Torlon® ball bearings to provide high performance and low friction.

The Ronstan back-to-back blocks have 3/4" sheaves and 1/4" maximum line diameter. Maximum working load is 550 lbs.; breaking load is 1210 lb. Weighs only 1.1 oz.

Ronstan part #RF20284.

RONSTAN SERIES 20 BALL BEARING BLOCKS LINKED AT 90 DEGREES

Ronstan Series 30 Utility Block, Fiddle

Murrays Part# 21-0186

Use this Ronstan small fiddle block for 4:1 system for boom vangs or righting aids.

This is used for H16 Aussie Halyard Systems too

Fiddle block with tube rivets

RONSTAN SMALL FIDDLE BLOCK

SAIL "HC" LOGO U-CUT PR BLACK

Cat Trax Tire Rim Assembly

Murrays Part# 13-1401-1

Replacement Cat Trax balloon tire and rim assembly.
Typically Ships from the manufacturer, which adds to the lead time.

Hobie Cat® Part# 1635

CAT TRAX TIRE & RIM ASSEMBLY (EACH)

Cat Trax Cotter Pin Stainless Steel

Murrays Part# 13-1401-8

Replacement cotter pin for Cat Trax beach wheels.

CAT TRAX COTTER PIN STAINLESS STEEL

GETAWAY JIB SNORKEL

O-Ring Seal (Center Screw)
Murrays Part# 005-0761-02
REBUILDING OXEN BLOCKS
Murrays is a complete repair facility for Oxen (aka IFL, Ochsen, Ocean) blocks. Just send us your block and we will rebuild it for an average cost of $60.00 plus parts and shipping. Some individuals have had success repairing their own blocks, but we have had many blocks sent to us in pieces when others have failed.

OXEN BLOCK O-RING SEAL(CENTER SCREW)

N5.8 Shroud 5/32" Black Wire Roller Swaged

Murrays Part# 002-4505-12

Single black shroud for Nacra 5.8 is hydraulically swaged to be clean and strong. Constructed to factory specifications.

N-5.8 SHROUD 5/32" BLACK WIRE ROLLER SWAGED

Prindle 19 Forestay 5/32" Black Wire with Turnbuckle

Murrays Part# 002-2445-42

Forestay with turnbuckle for Prindle 19 is constructed to factory specifications.

PRINDLE 19 FORESTAY 5/32"BLACK WIRE WITH TURNBUCKLE

PRINDLE 18 UPPER FORESTAY 5/32 BARE

The Staymaster Turnbuckle - No more hit-and-miss wire tensioning! Shorten your diamond wires and use an adjustable tension mechanism to easily repeat tension settings

STAYMASTER TURNBUCKLE 3/32

Big Cat Catamaran Righting System

Murrays Part# 001-8293

The Big Cat Righting System features the extra line needed to bring bigger cats up from turtle position while keeping the deck clear for better footing. The extra length of 1/2" hollow braided line is quickly accessed by unhooking either or both ends of line with carbine hooks. Extra line is neatly suspended just aft of front crossbar and is held in place with shock cord. Blue water tested and proven! The Big Cat Righting System fits Hobie® 20/21, P

BIG CAT RIGHTING SYSTEM

6" TWIST-N-SEAL HATCH

Hobie Getaway Jib-Bora Bora

Murrays Part# 50-379920781

Description:

Bora Bora / Chartreuse colorway Jib for the Hobie Getaway made from 6 oz Dacron. Compatible with any Hobie Getaway sailboat.

6 oz heavy duty Dacron sail cloth for long term durability.
Standard on all new Hobie Getaway sailboats starting in 2021.

Hobie Part# 379920781

GETAWAY JIB (BORA BORA)

Hobie EZ Loc Rudder Housing

50-50313001

EZ Loc Rudder Housing for Hobie Bravo

EZ Loc Rudder Housing for Hobie Getaway

EZ Loc Rudder Housing for Hobie Wave

Hobie part number 50313001

Fits Hobie Wave and Hobie Bravo and Hobie Getaway

HOBIE EZ LOC RUDDER HOUSING

Comptip Cap Plug

Murrays Part# 50-8090900

This part is used to seal the hole in the Comptip of a Hobie cat after the expanding foam has been put in.

Hobie Part# 8090900

COMP-TIP CAP PLUG

Getaway Tiller Crossbar (Older Castings, Tendon Style Connectors)

Murrays Part# 50-37522001

Hobie Getaway tiller crossbar for boats with tendon style connectors and older style rudder castings.

Hobie Part# 37522001

GETAWAY TILLER CROSSBAR

TILLER ARM INSERT Hobie factory tiller arm insert for 1953 tiller kit. Hobie part number 40660001. Murrays.com In stock

HOBIE TILLER ARM INSERT

Screw H20 Connector 10-24 X .25"

Murrays Part# 50-8032401

Hobie® factory replacement screw for Hobie 20 tiller connector. Stainless steel 10-24 x 1/4" pan-head machine screw with Phillips head.

Hobie Part# 8032401

H-20 CONNECTOR SCREW 10X24X.25"

Roller Furling Darby Ring (Small)

Murrays Part# 50-8062501

Hobie® factory replacement small Darby ring for roller furler.

Hobie Part# 8062501

ROLLER FURLING DARBY RING (SMALL)

Rivet AAC 3/16 x 5/8 CSK

Murrays Part# 50-8010171

Hobie® factory aluminum 3/16" x 5/8" countersunk rivet requires a rivet tool for installation.

RIVET AAC 6-10 3/16x5/8 CSK

H14/Wave Mast Base

Murrays Part# 50-10640011

Hobie® factory replacement black mast base for Hobie® 14 or Wave. Use four 6-6 rivets (#19-5032) for installation.

H-14/WAVE MAST BASE

Jib Traveler Car Plate Only

Murrays Part# 50-2524001

Hobie® factory replacement jib traveler car plate. Can be used on port or starboard side of the boat.

JIB TRAVELER CAR PLATE ONLY

H16 Mesh Trampoline- Turquoise

Murrays Part# 50-20970058

Mesh trampoline for the Hobie 16 with a double grommeted center section. Reinforced in high load areas, has super duty grommets and comes complete with line pockets and built in hiking straps. Note that this trampoline requires a longer lacing line than older models. Includes aft lacing strip. Lacing line is sold separately. Heat-welding lasts longer in the sun than trampolines that are stitched at the seams. Mesh allows wind and water t

H-16 MESH TRAMPOLINE-TURQUOISE

H18 Halyard Lock (Comptip)

Murrays Part# 50-61610101

Halyard hook for Hobie 18 comptip mast assembly.

Hobie Part# 61610101

H-18 HALYARD HOOK (COMPTIP)

Previous 1 … 20 21 22 23 24 … 57 Next

Recently viewed

All Sailing Parts