All Sailing Parts

2213 products

    Everything Nacra, Prindle, Hobie and a few more fun odds and ends.

    2213 products
    Harken Cleat Adapter with Hardware Murrays Part# 007-50010 Hobie Factory Part 50010
    CLEAT ADAPTER PLATE WITH HARDWARE
    Hobie
    Out of Stock
    HEAVY DUTY HAND RIVET TOOL
    HP
    Out of Stock
    Sunfish Two Loop Bridle Murrays Part# 68-91122 This two loop bridle provides a secure attachment point for the aft end of the mainsheet, allowing the boom to swing smoothly and evenly from side to side. Made from stainless steel cable with a protective plastic coating, it features two loops that connect to the eye straps on the deck for a strong and durable setup. Features: 2-loop design for balanced boom movement Stainless steel cable with plastic coating for durability
    SUNFISH TWO LOOP BRIDLE
    Laser Performance
    Murrays Hobie 16 Main Batten Set
    H-16 MAINSAIL FIBERGLASS BATTEN SET
    Murrays Sports
    Harken Traveler Car End Plates Murrays Part# 28-HSB78 End cap kit for #28-0214 Harken traveler car includes 2 end caps, screws, blue loc-tite and instructions. Sold as a pair
    HARKEN TRAVELER CAR END PLATES (2)
    Harken
    Sale
    Forward XL Gust Evo Sunglasses
    Forward Gust Evo Sunglasses size chart
    FORWARD GUST EVO SUNGLASSES - XL
    Forward Wip
    Save $36
    Harken 29mm Bullet Block-Becket Murrays Part# 28-0083 Medium-size Harken single bullet block with becket has Delrin® ball bearings and works well for control line or jib sheeting lines. The low-friction bullet block is compact and lightweight, with fast trim and release under high or low loads. Free-rolling Delrin® ball bearings. Sheave and sideplates are UV-stabilized with carbon-black additive for maximum protection.
    HARKEN 29MM BULLET BLOCK-BECKET
    Harken
    Harken Micro Carbo-Cam Cleat Murrays Part# 28-0471 Harken's Cam-Matic cleat has multiple rows of high-load ball bearings to reduce friction so that cams open easily for snap-down, rather than draw-through cleating. The cam horns and smooth V-shape guide line for easy entry. This allows precise sail control without having to readjust the cleated line.
    HARKEN MICRO CARBO-CAM CLEAT
    Harken
    Swivel with Bulls-Eye (No Cleat) Murrays Part# 25-3011 This item includes the swivel with bullseye, but not the cleat. Swivel cam cleats (cleat sold separately) are ideal for main traveler control and up-release jib cleating systems. Order plastic base pads and fasteners separately.
    SWIVEL WITH BULLS-EYE (NO CLEAT)
    Murrays Sports
    Clevis Pin Headless 3/16 X 1-1/2 Murrays Part# 22-9811 Stainless steel mast step hinge pin for Hobie® 16 has a hole on each end. Measures 3/16" diameter by 1-1/2" long. Part of the Hobie mast step link kit 21380001
    HEADLESS CLEVIS PIN 3/16 X 1-1/2"
    Misc
    Carabiner Hook1/4" x 2-3/8" Murrays Part# 22-4156 Carabiner hook is constructed of 316 stainless steel. Specifications: 1/4" diameter, 2-3/8" length, weighs .08 lb. with 700 lb. breaking strength.
    CARABINER HOOK 1/4" x 2-3/8"
    Misc
    RONSTAN OPEN V-CLEAT FOR 3-6MM LINE
    Ronstan
    Trimstar Control Line 4mm Yellow Trimstar Control Line 4mm Yellow Trimstar Control Line 4mm Yellow Double braid: Braided 16 strand HT Polyester core, HT Polyester cover. Trimstar Control Line is a durable control line with good grip. Ideal for halyards, downhaul, outhaul and cunningham
    TRIMSTAR CONTROL LINE 4MM
    AlphaRope
    Stand Up Spring Conical Light Murrays Part# 21-0319 This soft, conical spring is used for Harken bullet block (e.g. Hobie® 16 jib traveler car and Hobie® spinnaker pole blocks).
    STAND UP SPRING CONICAL LIGHT
    Murrays Sports
    Sale
    The Mystic Wetsuit Bag is a changing mat and a watertight carry bag for your wetsuit. Ideal for use for changing in and out of your wetsuit before and after a session and transporting your wet wetsuit back home in your car without leaking in your car.
    MYSTIC WETSUIT BAG
    Mystic
    Save $14.99
    FHSMS #8 X 1 Stainless Steel Murrays Part# 19-1620 Flat head, self-tapping, stainless steel #8 x 1" sheet metal screw. This screw is commonly used to hold the track endcaps on pre 1997 H16 Jib Traveler Tracks and all H18 Jib Traveler Tracks. Can screw into aluminum or fiberglass.
    SCREW FHSMS #8 X 1" (SS)
    Misc
    Digital 8 Sail Number Murrays Part# 010-2108BK Make any number and many letters from this peel-and-stick, black 12" black digital number 8. Small notches in the perimeter identify where to cut to make your desired digit. Details: Color: Black Size: 12" Quantity: Pack of 10
    DIGITAL 8 SAIL NUMBER
    Bainbridge
    Out of Stock
    Monofilm Sail Repair Kit Murrays Part# 010-3501 This is the "big kit" that you asked for. Heavy duty, 3 mil-thick clear monofilm comes in a big 20" x 27" sheet. Material is stored and protected inside a clear 2-1/8" diameter tube with reusable caps. For use on Mylar sails and other clear similar sail materials.
    MONOFILM SAIL REPAIR KIT
    Misc
    3/4" ADJUSTABLE FOAM LEECH CAPS (10)
    Tren-Tec
    Out of Stock
    Prindle 16 Angled Batten Luff Caps Murrays Part# 012-6005 No more battens poking through next to the mast. Angled luff caps prevent batten splitting and align batten to the angle of the sail, increasing the life of your sail. Glue to the forward end of the batten. Sold in packages of 9
    PRINDLE 16 ANGLED BATTEN LUFF CAPS (9)
    Tren-Tec
    Cat Trax Tire Rim Assembly Murrays Part# 13-1401-1 Replacement Cat Trax balloon tire and rim assembly. Typically Ships from the manufacturer, which adds to the lead time. Hobie Cat® Part# 1635
    CAT TRAX TIRE & RIM ASSEMBLY (EACH)
    Cat Trax
    Cat Trax Washer & Cotter Pin Kit Murrays Part# 13-1401-7 Kit includes: Replacement washers and cotter pins for two Cat Trax beach wheels.
    CAT TRAX WASHER & COTTER PIN KIT
    Cat Trax
    Cat Trax Cotter Pin Stainless Steel Murrays Part# 13-1401-8 Replacement cotter pin for Cat Trax beach wheels.
    CAT TRAX COTTER PIN STAINLESS STEEL
    Cat Trax
    Out of Stock
    Power Righting System I Murrays Part# 13-4101
    POWER RIGHTING SYSTEM I
    Murrays Sports
    Sail Repair Kit Murrays part# 007-1665 The Sail Repair Kit by Hobie Cat® keeps you prepared for emergency repairs to sails and trampolines. Includes 3 different weights of thread, 3 sizes of needles and an approximately 6" x 6" patch of white sail cloth. Hobie Cat® factory item #1665.
    SAIL REPAIR KIT
    Hobie
    O-Ring Seal (Center Screw) Murrays Part# 005-0761-02 REBUILDING OXEN BLOCKS Murrays is a complete repair facility for Oxen (aka IFL, Ochsen, Ocean) blocks. Just send us your block and we will rebuild it for an average cost of $60.00 plus parts and shipping. Some individuals have had success repairing their own blocks, but we have had many blocks sent to us in pieces when others have failed.
    OXEN BLOCK O-RING SEAL(CENTER SCREW)
    Oxen
    CHANNEL INSERT M4 - .7mm with SCREW
    Misc
    Tiger Diamond Wire Double without Turnbuckle Murrays Part# 002-6095-20 Double diamond wire without turnbuckle for Hobie® Tiger is constructed to factory specifications.
    TIGER DIAMOND WIRE DOUBLE WITHOUT TURNBUCKLE
    Murrays Sports
    Inter 20 Diamond Wire without Turnbuckle Murrays Part# 002-5494-20 Diamond wire without turnbuckle for Inter 20 is constructed to factory specifications. Includes both sides.
    NACRA INTER 20 DIAMOND WIRE WITHOUT TURNBUCKLE
    Murrays Sports
    Inter 20 Forestay 5/32" Black Wire Murrays Part# 002-5445-12 Forestay for Inter 20 (without roller furling jib) is constructed of 5/32" black-coated wire to factory specifications.
    NACRA INTER 20 FORESTAY 5/32" BLACK WIRE
    Murrays Sports
    Nacra Inter 17 Bridle 1/8" Black Wire Murrays Part# 002-5214-12
    NACRA INTER 17 BRIDLE 1/8" BLACK WIRE
    Murrays Sports
    N-5.2 BRIDLE 5/32 BLACK WIRE
    Murrays Sports
    P19 Upper Forestay 5/32" Bare Wire Murrays Part# 002-2435-00 Bare upper forestay for Prindle 19 is constructed to factory specifications.
    PRINDLE 19 UPPER FORESTAY 5/32" BARE WIRE
    Murrays Sports
    Prindle bridle wire
    PRINDLE 19 BRIDLE 5/32 BK
    Murrays Sports
    P16 Upper Forestay 1/8" Bare Wire Murrays Part# 002-2234-00 Upper forestay for Prindle 16 is constructed of bare 1/8" wire to factory specifications.
    PRINDLE 16 UPPER FORESTAY 1/8" BARE WIRE
    Murrays Sports
    Prindle 16, P18 Jib Block Wire Murrays Part# 002-2224-00 Jib block wire for Prindle 16 or 18 is constructed to factory specifications. A swaging tool is needed for installation.
    PRINDLE 16/18 JIB BLOCK WIRE
    Murrays Sports
    H18SX Forestay 5/32" Black Wire Murrays Part# 002-0645-12 Black forestay for Hobie® 18SX is constructed to factory specifications. Compare to Hobie Cat® Part# 68814501
    H-18SX FORESTAY 5/32" BLACK WIRE
    Murrays Sports
    H-17 SPORT BRIDLE 5/32 BK​ Murrays PN 002-0315-22​ One bridle for the Hobie® 17 Sport (with jib) is constructed of black-coated, 5/32" 1x19 to factory specifications. Compare to Hobie 52500201.
    H-17 SPORT BRIDLE 5/32" BLACK WIRE
    Murrays Sports
    Rudder Pins H17/18 (Nylon) Murrays Part# 001-4271 Nylatron rudder pins are sacrificial for use in the surf (they'll break before your rudder system does) and should be inspected often for wear. These universal 3/8" x 9-1/4" nylon rudder pins are suited for all Hobie® 17/18/Wave rudder castings. Compare to Hobie Cat® #5052 fiberglass rudder pins (pair).
    RUDDER PINS H-17/18 PR (NYLON)
    Murrays Sports
    N-5.0 MAIN HALYARD WITH SHACKLE
    Murrays Sports
    Recently viewed