All Sailing Parts

All Sailing Parts

2262 products

Everything Nacra, Prindle, Hobie and a few more fun odds and ends.

2262 products

Sort

P16 Upper Forestay 1/8" Bare Wire

Murrays Part# 002-2234-00

Upper forestay for Prindle 16 is constructed of bare 1/8" wire to factory specifications.

PRINDLE 16 UPPER FORESTAY 1/8" BARE WIRE

Soft Grip Standard Extension .570 x 11"

Murrays Part# 007-3206

This is a grip upgrade for the standard Hobie Tiller extension, it will also fit the Murrays fixed tiller extension as well.

Hobie Part# 3206

SOFT GRIP STANDARD EXTENSION .570 x 11"

Hobie Getaway Forestay Yoke

Murrays Part# 50-37810030

This is part of the forestay assembly that hooks up to the main shackle on the mast.

Hobie Part# 37810030

GETAWAY FORESTAY YOKE

HOBIE SAIL AND BOOM BAG STANDARD

Hobie EZ Loc Rudder Linkage

Murrays Part# 50-50313201

Replacement rudder linkage for Hobie EZ Loc style rudder assemblies.

 Hobie Bravo, Getaway and Wave

Hobie Part# 50313201

HOBIE EZ LOC RUDDER LINKAGE

Wave Trampoline Tension Wire

Murrays Part# 50-38970051

This is the wire that goes through the side of a Hobie Wave Classic trampoline and hooks into the hooks on the hulls to tension the tramp.

WAVE TRAMPOLINE TENSION WIRE

Gooseneck Boom Pin

Murrays Part# 50-50502201

Hobie Cat gooseneck boom pin for securing boom assembly to mast at the gooseneck joint.

Hobie Part# 50502201

HOBIE GOOSENECK BOOM PIN

NUT NYLOCK 5/16"-18 LOW PRO

H18 Mast Base Casting-Black

Murrays Part# 50-60641031

Hobie® factory replacement black mast base casting for Hobie® 18. Use four #19-5032 rivets for installation.

H-18 MAST BASE CASTING-BLACK

H18 Thru-Deck Fairlead

Murrays Part# 50-60270000

Fairlead Thru-Deck H18 for trapeze shock cord for skipper and crew trapeze lines that go through the lip on the outside of the hull.

Center hole on this fairlead is 7/8" diameter and is sleeved with a stainless steel ferrule. Mounting screw holes have a center-to-center measurement of 1-3/8". Hobie® factory replacement part.

Hobie Part# 60270000

H-18 THRU-DECK FAIRLEAD

Screw PHMS #10-32 X 1 Stainless Steel Slot Head
Murrays Part# 19-2915
Stainless steel, pan head #10-32 x 1" machine screw with slot is used as dolphin striker screw on all Prindles. Replaces Murrays item #56-F112.
Also used in some Hobie Applications, compare to 8030111 Hobie Part.
Applications:
H18/18 SX/16 and Getaway
Tiller Hinge Screw: 2

SCREW PHMS #10-32 X 1" (SS)

Solid Rivet 1/8 x 5/16" Brass

Murrays Part# 19-5004

Solid Rivet 1/8 x 5/16 Brass

Used on sail headboards, clew and tack plates.

Hobie Part# 8010020

SOLID RIVET-BRASS 1/8"

Snuffer Pole Pin Bracket

Murrays Part# 56-9626

Use this bracket to attach spinnaker pole (discontinued item #56-9622) to boat.

Nacra Sailing factory item# 30293

NACRA SNUFFER POLE PIN BRACKET

Hobie 16 Aussie jib halyard kit

Hobie 16 aussie jib halyard kit

H16 AUSSIE JIB HALYARD KIT

Sail Ring Pack (30)

WAVE TRAMPOLINE LACING KIT

Hobie factory replacement long lock screw for EZ Loc rudder system. Specs: 12-24X3/4 long lock PHMS screw Hobie PN 8030411

EZ LOC LONG SCREW

H20 Outhaul Bearing

Murrays Part# 50-40250001

Hobie® factory replacement outhaul bearing for Hobie 20. This part is installed into the outhaul car outside of the boom, it keeps the car from falling down into the car slot.

Hobie Part# 40250001

H-20 OUTHAUL BEARING

Prindle 16 Line Package
Murrays Part 001-39P16
replaces all the lines on a Prindle 16 sailboat.
Line Package Includes:
Mainsheet 3/8" 40'
Traveler Control 5/16"
Jib Sheet 5/16" 33'
Barber Hauler 1/4" 16'
Trapeze Adjustment Line 1/4" 14' cut into 4x 3.5' pieces
Main Halyard 3/16" 52'
MURRAYS PRINDLE Jib halyard Kit
Outhaul 3/16" 8'
Downhaul 1/4" 15'
Righting Line 1/2" 16'
Murrays Rudder Pull UP/ Pull Down kit
Mast Rotator Line 3/16" 5'
Murrays Trapeze Bungee kit
Jib Jam

PRINDLE 16 LINE PACKAGE

Tiller Joint- 3" Urethane Rod

Murrays Part# 56-4588

The Nacra Tiller Joint - 3" Urethane Rod is for tiller connections on all Inters, the 500, 570, F18 Infusion and more. The part must be drilled to match your application.

Compare to Nacra Part# 4588

NACRA TILLER JOINT- 3" URETHANE ROD

Standard Polyester Yacht Braid 1/4" White
Murrays Part# 39-3141
1/4″ Double Braid Halyard Line
1/4″ Double Braid Halyard Line is ideal for halyard line on Hobie, Narca and Prindle catamarans.
Our 1/4″ Halyard Line features a polyester core and a polyester cover. Making it easy to splice, taper or customize to fit your needs.
This highly versatile rope combines low stretch with high strength offering dependability and unsurpassed resistance to abrasion, sunlight, sea salt and common chemic

1/4" DOUBLE POLY YACHT BRAID WHITE 6.35MM

ROOSTER PRO LITE AQUAFLEECE TOP

Compact multi-purpose buoyancy aid with short fit for ease of movement, suitable for all round watersports use. There is good adjustment at the shoulders, sides and waist. Both the shoulder and waist straps are highly adjustable to ensure that there is plenty of room for growth, providing a good fit for different body shapes.

ROOSTER USCG PFD

6" ARMSTRONG DECK PLATE

Tiller Crossbar Adjustable Cap Kit

Murrays Part# 50-6040000M

Murrays Tiller Crossbar connection kit is a complete kit to connect the Hobie tiller cross bar and tiller arms. This is modeled after the original design but with some upgrades. We use 2 adjustable end caps to extend the overall adjustment length. Allows users shorten their tiller crossbar due to corrosion. 2 adjustable caps also allows users to adjust the crossbar length from either end of the bar. The tiller crossbar

TILLER CROSSBAR ADJUSTABLE CAP KIT

H16 Mainsail (White)

Murrays Part# 50-20991011

This is an OEM White Mainsail from Hobiecat. This includes a basic Hobie sail bag and batten ties. This is class legal for Hobie One Design Racing.

Hobie Part# 20991011

H-16 MAINSAIL (WHITE)

H18SX Bracket Wing Strut

Murrays Part# 50-91490010

This is the bracket that the rear support arm of an H18SX wing uses. One is mounted to the wing and one is mounted to the rear hull of an H18SX per wing.

Hobie Part# 91490010

H-18SX BRACKET WING STRUT

H16 Kissme Jib Sheet & Traveler Upgrade DELUXE

Murrays Part# 001-3151

This is the best way to upgrade your vintage H16 jib sheeting system. This kit includes upgraded traveler cars with carbo blocks for smooth function, and Ronstan cam cleats to facilitate smooth and accurate jib traveler position control.

Kit Includes:

Traveler Cars with Pulleys

Corner Casting Cheek Blocks

360 Swiveling Jib Sheet Cleat

Traveler Car Control Cam Cleat

Traveler Car Control line

Auto Center Bungee

H-16 KISSME JIB SHEET & TRAVELER UPGRADE DELUXE

Rear Boom End Cap

Murrays Part# 56-7903

Rectangular rear boom end cap casting for Nacra 5.2 and all Prindles.

Nacra Sailing factory item# 30205

NACRA/PRINDLE REAR BOOM END CAP

Prindle Rudder Lock Bolt Nut
Murrays Part# 56-4018
The Prindle Rudder Lock Bolt Nut is the factory replacement 3/8″ hex nut for rudder lock bolts on all Prindles.

Also used as the jam nut for adjuster screw on Nacra bridle foil assembly.
Nacra Sailing factory item #30420.
Prindle part number 4018

Prindle rudder parts 4000, 4001, 4002, 4004, 4005, 006, 4007, 4009, 4012, 4010, 4014, 013, 4016, F115, F120

PRINDLE/NACRA RUDDER LOCK BOLT NUT

Harken Cleat Adapter with Hardware

Murrays Part# 007-50010

Hobie Factory Part 50010

CLEAT ADAPTER PLATE WITH HARDWARE

Harken 40mm Triple Block - Swivel

Murrays Part# 28-2640

Low-friction Carbo AirBlocks® are lightweight, strong, reliable and affordable. These small, compact blocks have very high working loads for safe, easy trimming.

This is a fantastic block for a performance AND economical H16 mainsheet system top block. Use it with a 57mm base block for 6:1 performance system.

HARKEN 40MM TRIPLE BLOCK SWIVEL

Harken Micro Cam-Matic Cleat

Murrays Part# 28-0468

Harken's Cam-Matic cleat has multiple rows of high-load ball bearings to reduce friction so that cams open easily for snap-down, rather than draw-through cleating. The cam horns and smooth V-shape guide line for easy entry. This allows precise sail control without having to readjust the cleated line.

HARKEN MICRO CAM-MATIC CLEAT

Harken 16mm Single

Murrays Part# 28-0404

The Harken air block offers a very high load in an extremely lightweight block. Excellent for control lines. The block itself is only 1-1/8" long. The 5/8" sheave will accept line as large as 7/32". 250 lb. SWL; 1200 lb. breaking strength.

HARKEN 16MM SINGLE

Harken 29mm Block - Swivel

Murrays Part# 28-0340

Harken's compact 29mm Carbo block is extremely strong. Use as a mainsheet block on small boats or for low-friction control block on any size boat.

Specifications:

330 lb. SWL
1000 lb. breaking strength
5/16" maximum line diameter
5/32" shackle pin diameter
2-5/8" long
Weight with shackle .9 oz.

Harken Part# 340

HARKEN 29MM BLOCK-SWIVEL

HARKEN 38MM LOW-PROFILE STANDARD EYE STRAP

Harken 150 Cam-Matic Cleat Rebuild Kit - 1993 and Newer

Murrays Part# 28-0150KIT

This rebuild kit is the answer when plastic parts on Harken's 150 Cam-Matic® Cleat have worn out or suffered UV damage, and/or when the springs need to be replaced.

HARKEN 150 CAM-MATIC CLEAT REBUILD KIT-1993 & NEWER

Ring 3/8 X 2" (Nylon)

Murrays Part# 27-190570

3/8" nylon ring has an inside diameter of 2 inches.

RING 3/8 X 2" (NYLON)

Clamcleat Trapeze & Vang Cleat

Murrays Part# 27-0253

The Clamcleat® trapeze and vang cleat allows for 2:1 trapeze adjustment while hooked up. Line rolls easily on large base roller. 1/4" line capacity. Each.

Clamcleat version of a Ronstan Part# RF5121

CLAMCLEAT TRAP & VANG CLEAT

Harken Micro Carbo-Cam Cleat

Murrays Part# 28-0471

Harken's Cam-Matic cleat has multiple rows of high-load ball bearings to reduce friction so that cams open easily for snap-down, rather than draw-through cleating. The cam horns and smooth V-shape guide line for easy entry. This allows precise sail control without having to readjust the cleated line.

HARKEN MICRO CARBO-CAM CLEAT

Previous 1 … 16 17 18 19 20 … 57 Next

Recently viewed

All Sailing Parts