All Sailing Parts

1792 products

    1792 products
    H14 Line Package Comptip Murrays Part# 001-3914C This is a replacement line package for your Hobie 14 with a comptip.  Line Package Includes:  Main Halyard Comp-Tip Style  Mainsheet 3/8" 42' Downhaul 3/16" VLS 5' Outhaul 3/16" VLS 7.5' Tramp Center Lacing 1/4" 19' Tramp Rear Lacing 1/4" 15' Righting Line 1/2" 16'
    H-14 LINE PACKAGE COMPTIP
    Murrays Sports
    H14 Line Package Non-Comptip Murrays Part# 001-3914 Replacement Line package for your classic all aluminum mast Hobie 16.  Line Package Includes: Main Halyard 3/16" 22' Mainsheet 3/8" 42' Downhaul 3/16" VLS 5' Outhaul 3/16" VLS 7.5' Tramp Center Lacing 1/4" 19' Tramp Rear Lacing 1/4" 15' Righting Line 1/2" 16'
    H-14 LINE PACKAGE NON-COMPTIP
    Murrays Sports
    DAIMOND CUT EVA FOAM DECK/RAIL GRIP SHEET 40x62" Peel and stick diamond cut EVA foam sheet for rail and deck grip on all Hobie, Nacra, Prindle catamarans, Surfboards, Paddleboards, Dingy, Keel boat traction. Easy to install traction pads for Hobie rails and hulls. EVA foam does not absorb water, adds some padding as well. Sheets can be cut into strips for anywhere traction or padding is wanted or it can be used to cover the hull for padding grip and UV protection. Great for older boats as well
    DAIMOND CUT EVA FOAM DECK/RAIL GRIP SHEET
    Murrays Sports
    NACRA INTER 17 SHROUD 5/32" BLACK WIRE RACE
    Murrays Sports
    Hobie 16 Shroud Extra Heavy Duty 5/32" Murrays Part# 002-0205-12 The Murrays Heavy Duty 5/32" Hobie 16 shroud (sidestay) wire is an extra heavy duty shroud for the Hobie 16.  It is 5/32 wire compared to the standard 1/8" wire and we use a roller swaged marine eye fitting on the lower connection point. Our hydraulic swager exerts a force of over 10,000 pounds to quickly swage without work-hardening the stainless fittings. 20790011
    H-16 SHROUD EXTRA HEAVY DUTY 5/32" WIRE
    Murrays Sports
    Downhaul Kit 8:1 H18 Murrays Part# 001-2150 This is a performance upgrade downhaul kit that give increased performance control for your Hobie 18 Catamaran. The downhaul leads are run to the side of the boat for crew control and the loads are oriented to reduce sail tack damage that is common on the H18. It takes minutes to install with a rivet gun a drill and approximate measuring. The kit was born from a discussion at the 2023 NACs wherein many of the boats in Division 4 have a variation of the
    DOWNHAUL KIT 8:1 H-18
    Murrays Sports
    Out of Stock
    Harken 40 mm Zircon Block Murrays Part# 28-2190 ​Zircon blocks help trimmers match sail shapes to new conditions immediately. At the core of the Zircon performance are industrial ceramic ball bearings mounted inside caged races. The cages keep these bearings separated so they don’t bunch, touch, and stop each other. The result is the most efficient small boat block Harken has ever made. Zircon blocks are available in 40- and 57-mm sheaves in single and double blocks, with or without beckets.
    HARKEN 40MM ZIRCON BLOCK
    Harken
    PRINDLE 18 LINE PACKAGE
    Murrays Sports
    Harken 16mm Flip-Flop Block Murrays Part# 28-0437 The 16 mm is Harken’s smallest block. It is perfect for small synthetic control lines found on high-tech dinghies. The patented bearing system uses stainless steel balls in a captive grooved race and has a 250 lb. (113 kg) maximum working load. Harken Part# 437
    HARKEN 16MM FLIP-FLOP BLOCK
    Murrays Sports
    Harken 57mm T2™ Soft-Attach Ratchamatic® Block-Red Sheave Murrays Part# 28-2160red Harken Block 57mm T2 Soft-Attach Ratchet Block for catamarans, this tie-on block eliminates the need for shackles, posts, swivels, etc. It is ultra-lightweight and sized like a bullet-block.
    HARKEN 57MM T2 SOFT-ATTACH RATCHAMATIC BLOCK-RED SHEAVE
    Harken
    Harken 57mm Ratchamatic HTE Block-Swivel, 1.5x Grip Murrays Part# 28-2165HTE ​The Harken Carbo Ratchamatic® is a load-sensing ratchet block that rolls freely in both directions under low loads and automatically engages the ratchet as loads increase. Shifting between ratchet and light-air modes is seamless. The spring on the HTE (high-threshold engage) version of the 57 mm Carbo Ratchamatic blocks was made stiffer to delay the point where the ratchet engages, allowing the block to run free more of the time
    HARKEN 57MM RATCHAMATIC HTE BLOCK-SWIVEL, 1.5X GRIP
    Harken
    HARKEN 57MM TRIPLE RATCHET BLOCK-SWIVEL, CAM CLEAT
    Harken
    HOBIE 16 MAINSAIL BATTEN CAP KIT - LEACH - 1522H
    HOBIE 16 MAINSAIL BATTEN CAP KIT - LEACH
    Hobie
    Out of Stock
    57mm Harken Ratchamatic Block — Swivel, Becket, Cam Cleat Murrays PN 28-2628 ​The Carbo Ratchamatic® is a load-sensing ratchet block that rolls freely in both directions under low loads and automatically engages the ratchet as loads increase. Shifting between ratchet and light-air modes is seamless. Harken Part No. 2628​ HOBIE 18 JIB SHEET BLOCK - HARKEN 60330041
    HARKEN 57MM RATCHAMATIC - SWIVEL, BECKET, CAM CLEAT
    Harken
    HOBIE 16 JIB TRAVELER CAR SHEAVE Replacement Hobie 16 Jib traveler car sheave. Hobie part number 20132030
    H16 JIB TRAVELER CAR SHEAVE
    Hobie
    NACRA MAST HEAD SHEAVE - 30185
    NACRA MAST HEAD SHEAVE - 30185
    Murrays Sports
    Harken 38mm Big Bullet Sheave Murrays Part# 56-6503 The Mast Head Sheave NACRA 4.5, 5.0, 5.2, 5.7 is an upgraded replacement sheave for mast head on Nacra 4.5, 5.0, 5.2 and 5.7 has a Delrin® sheave with Delrin® ball bearings.
    HARKEN 38MM BIG BULLET SHEAVE
    Murrays Sports
    H14 Masthead Sheave The Hobie 14 Mast head sheave - Old Style is the large plastic pulley sheave. Replacement for the sheave in the original all aluminum Hobie 14 mast that has a single large sheave in the mast head. Hobie 14 pre comptip masthead sheave. Measures 4" x 3/8" with a 3/8" hole. ​Requires a 3/8" x 1.5" clevis pin or bolt to install or the 51-14041713 Mast Head Sheave Pin. Hobie part number 14041712
    H14 Masthead Sheave
    Hobie
    Hobie 16 Hull Pads by Forward
    Forward WIP
    Nut Hex MS #6-32 (Brass) Murrays Part# 19-2010 Brass hex nut fits Pocket Protector kits #01-1001 and #01-1002. Measurements are diameter and threads per inch.
    HEX NUT #6-32 (BRASS)
    Misc
    Nacra Side Loader Murrays Part# 56-1018 Side loader holds daggerboard in place Nacra Sailing factory item #30008.
    NACRA SIDE LOADER
    Murrays Sports
    Trampoline Slug Slide Murrays Part# 56-9892 Use for lacing tramp to rear crossbar to eliminate the need for an aft lacing strip. The slug can also be used in sail track. Used on the Hobie Getaway and Hobie 21SC forward trampolines Hobie Part # 96280000
    TRAMP SLUG SLIDE
    Murrays Sports
    Screw PHSMS #10 X 1/2 Stainless Steel Philips Head Murrays Part# 19-3209 Stainless steel, Phillips pan head #10 x 1/2" self-tapping sheet metal screw.
    PHSMS #10 X 1/2 (SS) PHIL HD
    Misc
    Out of Stock
    H14 Main Batten Set Murrays Part# 46-3011 Hobie factory saturn shaped fiberglass battens for a Hobie 14 main sail. They are cut to length and can be shortened as necessary for your sail. This is how Hobie makes their sets! Batten caps are included.
    H-14 MAIN BATTEN SET
    Murrays Sports
    Rivet CCP 4-6 (1/8 X 3/8) Murrays Part# 19-5030 Stainless steel 1/8" x 3/8" rounded pan head rivet.
    RIVET CCP 4-6 (1/8 X 3/8)
    Murrays Sports
    Out of Stock
    Nacra Center Post Bridle Foil Murrays Part# 56-9663 Center post for Nacra bridle foil. Performance Sports factory #9663 Nacra Sailing #30303.
    NACRA CENTER POST BRIDLE FOIL
    Murrays Sports
    Out of Stock
    Bushing Rudder Pin for Euro Casting Murrays Part# 50-F99220113
    BUSHING RUDDER PIN EURO CAST
    Hobie
    The Selma fid (needle) is the only tool for splicing all kinds of rope. Selma fids are made of highly polished stainless steel. Made in Norway and patented worldwide. Please note that the appropriate fid size will depend on the type and construction of line. The purchase of a set of 4 or 5 fids may be a better option if you are unsure of the fid size you need.
    SELMA FID 5.5mm 1/4-5/16"
    Selma
    The Selma fid (needle) is the only tool for splicing all kinds of rope. Selma fids are made of highly polished stainless steel. Made in Norway and patented worldwide. Please note that the appropriate fid size will depend on the type and construction of line. The purchase of a set of 4 or 5 fids may be a better option if you are unsure of the fid size you need.
    SELMA FID 13mm 1/2-9/16"
    Selma
    Out of Stock
    Bridle Foil Rod with Screw Adjuster N5.8, 6.0 Murrays Part# 56-9669
    BRIDLE FOIL ROD w/SCREW ADJUSTR
    NACRA
    Out of Stock
    Boomlet HC17 SE to Sport Conversion Murrays part# 50-52722011 Make it much easier to move from one side of a Hobie® 17 to the other while tacking or jibing by removing the boom. Easily convert 1995 and newer Hobie® 17 SE race boats by adding the Hobie factory Boomlet. Hobie part# 52722011
    BOOMLET HC-17 SE TO SPORT CONV
    Hobie
    Out of Stock
    BOOM ASSY H20 OS
    Hobie
    Out of Stock
    Boom Assembly H17 Black Murrays Part# 50-50510000 Hobie® factory replacement black boom assembly for Hobie® 17.  Hobie part# 50510000
    BOOM ASSEMBLY H-17 BLACK
    Hobie
    Out of Stock
    SNUFFER BAG END POLE 11'
    Murrays Sports
    Race Tramp Line Kit: Prindle Murrays part# 01-224x-1 The Race Tramp Line Kit: Prindle - Dyneema® has excellent ultraviolet and abrasion-resistance properties for longevity. Because of Dyneema's characteristics, a smaller line than normal can be used, resulting in weight savings.
    Race Tramp Line Kit: Prindle
    Murrays Sports
    N15 C-Foil Bearing Deck Fixed Daggerboard Bearing Nacra part number 32234
    N15 C-FOIL BEARING DECK FIXED
    NACRA
    Hobie Jib Batten Pocket Protector with Screws Hobie part number 22080011
    HOBIE JIB POCKET PROTECTOR WTH SCREWS
    Hobie
    Harken 40mm Zircon Catamaran Mainsheet System Murrays Part# 28-2801 This new, more compact Zircon ceramic bearing mainsheet system is a testimonial to the power of collaboration. The previous generation of GP mainsheet system had become the standard among catamaran sailors at the highest levels.
    HARKEN 40MM ZIRCON CATAMARAN MAINSHEET SYSTEM
    Harken
    6mm Robline Orion 300 is a versatile rope in a traditional design. Its high UV resistance, longevity, and great ease of handling make Orion 300 a benchmark for many recreational and cruising applications. The soft hand and durable cover make it great for halyards. This is the 6mm / 1/4 inch option.
    ORION 300 CONTROL LINE 6mm WH
    Robline
    Sol Cat 18 Bridle 1/8" Murrays Part# 002-6214-02 Single bridle for Sol Cat 18 Bridle 1/8" is constructed to factory specifications.
    SOL-18 BRIDLE 1/8" BLACK WIRE
    Murrays Sports