Sailing Hardware

382 products

    Sailing Hardware for Hobie, Nacra and Prindle Catamarans

    382 products
    Bolt 5/16-18 x 2-1/2" HX HD Murrays Part# 50-8040321 EZ Loc Lower Rudder Bolt for Hobie Bravo, Getaway and Wave. Hobie Part# 8040321
    BOLT 5/16-18 x 2-1/2" HX HD
    Hobie
    Screw 1/4-20 x 1" THMS-P SS Murrays Part# 50-8030701 Hobie® factory replacement 1/4-20 x 1" stainless steel screw. Used on Hobie® pre-EZ-Loc rudder system, tendon tiller connector, rudder adjuster, Hobie 20 shroud anchor plate. Applications: H18/ Hobie 18 SX Rudder Adjuster Screw: 1 Compare to Hobie Part# 8030701
    SCREW STAINLESS STEEL 1/4-20x1"
    Hobie
    Bolt 5/16-18 X 2" Murrays Part# 50-8040331 Replacement 5/16-18 x 2" bolt is used as a rudder bolt on Hobie® Pre-EZ Lock Rudder System. Hobie Part# 8040331
    BOLT 5/16-18 X 2"
    Misc
    SCREW STAINLESS STEEL #10 x 3/4 PHSM-PH
    Hobie
    FHMS #10-24 X 2 (SS) PHIL
    MISC
    FHMS #8-32 x 1.5 (SS)
    Misc
    Oxen Block Becket Clevis Pin 3/16 X 1-1/4" Length: 3/16 X 1-1/4
    OXEN BLOCK BECKET CLEVIS PIN
    Oxen
    Ronstan Swivel Shackle 3/16" (Jaw/Jaw) Murrays Part# 21-0120 Ronstan's swivel shackle has 3/16" diameter pins and 1430 lb. breaking load. Bodies and pins are constructed of grade 316 stainless steel. 1-1/4" length from centers of pins. Weighs .7 oz. Specific Details: A (in) 3/16 B (in) 15/32 C (in) 1 1/4 E (in) 11/32 Ronstan Part# RF120
    RONSTAN SWIVEL SHACKLE 3/16" (JAW/JAW)
    Ronstan
    Rivet 3/16 x 5/16 Aluminum Murrays Part# 50-8010071 Hobie® factory aluminum 3/16" x 5/16" rivet. A rivet tool is required for installation.
    RIVET 3/16X 5/16 ALUMINUM
    Hobie
    Out of Stock
    Clevis Pin 5/16 X 2.2" Upper Murrays Part# 50-8020101 Hobie® factory replacement 5/16" diameter x 2.2" clevis pin
    CLEVIS PIN 5/16 X 2.2" UPPER
    Hobie
    Clevis Pin 1/4 x 2-1/4" Murrays Part# 56-4587 1/4 x 2-1/4" clevis pin for all Inter rudder assemblies. Used to hold tiller crossbar assembly to tendon. Nacra sailing factory item# 30428
    CLEVIS PIN 1/4 x 2 1/4"
    NACRA
    Wichard Quick Release Snap Shackle with Swivel Eye Murrays Part# 27-2673 Wichard Snap Shackles are forged in High Resistant 17-4PH (HR) Stainless Steel. Wichard snap shackles will never break suddenly! They show signs of deformation well before reaching the breaking point.
    WICHARD QUICK RELEASE SNAP SHACKLE WITH SWIVEL EYE
    Wichard
    Out of Stock
    Rivet 4-8 CSK Aluminum Murrays Part# 50-8010051 Rivet pop 1/8x1/2 -AL Hobie Part# 8010051 or 8010050
    RIVET 4-8 CSK ALUMINUM
    Hobie
    OXEN BLOCK OUTER HUB RING SPRING
    Oxen
    Oxen Block Trip Lever Stand Up Spring
    OXEN BLOCK TRIP LEVER STAND UP SPRING
    Oxen
    OXEN BLOCK CAM SPRING
    OXEN BLOCK CAM SPRING
    Oxen
    M8 x 20mm Phillips Head Hydrofoil Bolt Murrays Part# 55-0014 The M8 x 20mm Phillips Head Hydrofoil Bolts are used on Slingshot, Cloud IX, Lift Foils and many more. It's always good to have an extra set on hand, in case you loose some. This is your foil mast to mast collar connection bolt. Made of corrosion resistant 316 stainless steel.
    M8x20MM PHILLIPS HEAD BOLT-SS
    Misc
    M8x30MM SS FLAT HEAD BOLT
    Misc
    M8 x 35mm TORX COUNTERSUNK BOLT
    NACRA
    CHEATA SPLASH PLATE SCREW
    Murrays Sports
    M8 NYLOCK NUT
    Murrays Sports
    F-ONE M6X15MM TORQUES HEAD SCREW (4)
    F-One
    TIGER GUDGEON SCREW 2008
    Hobie
    Wave Club Traveler Kit Murrays Part# 50-39250000 The Hobie Wave Main Traveler Kit is the Hobie factory main traveler kit for Club Wave includes track, Ronstan cleat, traveler car, mounting plate and rivets.
    WAVE CLUB TRAVELER KIT
    Hobie
    Nacra U-Bracket Bolt Murrays Part#  56-31464 Bolt pan head 1/4 x 1/2" UNC for boom U-bracket. Bolt is also used for Wingseat frame connection
    NACRA U-BRACKET BOLT
    NACRA
    Nut 3/8-16 HX Nylock-LP Murrays Part# 50-8050540
    NUT 3/8-16" HX NYLOCK-LP
    Hobie
    Out of Stock
    Nut Nylock 3/8-24 Murrays Part# 50-8050511 Replacement 3/8-24 nylock nut is used on Hobie® 14, 16 and 18 dolphin striker rods, as well as Hobie® 17 inboard support. Hobie Part# 8050511
    NUT NYLOCK 3/8-24"
    Hobie
    Screw 3/8-16 x 4" PHMS-P Murrays Part# 50-8040600 This screw is for holding the wing side leg brace. Hobie Part# 8040600
    SCREW 3/8-16 x 4" PHMS-P
    Hobie
    Bolt 3/8-16 X 2" Murrays Part# 50-8040501 Replacement stainless steel 3/8-16 x 2" bolt is used on Hobie® 18 front and rear crossbars. Hobie Part# 8040501
    BOLT 3/8-16 X 2"
    Hobie
    Bolt 5/16 X 18 X3.5" Murrays Part# 50-8040371 Hobie® factory replacement 5/16-18 x 3-7/16" bolt. Pylon bolt for Hobie® 14 and older 16 (1994 and prior; starting in 1995, boats had newer style castings/pylons). Hobie Part# 8040371
    BOLT 5/16 X 18 X3.5"
    Hobie
    Bolt 3/8-16 X 5" 50-8040061 Hobie® factory 3/8-16 x 5" bolt is used on Hobie 20 Miracle front crossbar. Hobie Part# 8040061
    BOLT 3/8-16 X 5"
    Hobie
    Screw ES Soc Cap 5/16-18 X 1" Murrays Part# 50-8031781 5/16"-18 x 1" soc head screw as used on Hobie® kayaks Hobie Part# 8031781
    SCREW E/S SOC 5/16-18 X 1"
    Hobie
    REMOVABLE STUD (8X50mm)
    Misc
    REMOVABLE STUD (8x40mm)
    Misc
    Flat Head Machine Screw #8-32 X 1.25 (White Nylon) Nylon #8-32 x 1.25" flat head screw for installation of ports. Available in black or white
    SCREW FHMS #8-32 X 1.25" (WHITE NYLON)
    Misc
    Out of Stock
    Washer Flat 1/4 x 5/8" Murrays Part# 50-8080521 Hobie® factory replacement 5/8" x 9/32" flat washer is used on Hobie 18 mast step assembly. Hobie Part# 8080521
    WASHER FLAT 1/4 X 5/8"
    Hobie
    Screw 8-32 X 3/8" THMS Roller Furler Drum Murrays Part# 50-8030501 Hobie® factory replacement 8-32 x 3/8" screw for roller furler drum. Hobie Part# 8030501
    SCREW 8-32X3/8" THMS
    Hobie
    Inter Rudder Eye Adjustment Screw Murrays Part# 56-1000 Rudder adjustment eye screw for all Inters Nacra Sailing factory item #30000
    NACRA INTER RUDDER EYE ADJUSTMENT SCREW
    NACRA
    Out of Stock
    Bolt Socket Head 3/8-16 X 3.75" Murrays Part# 50-8040561 Hobie® factory replacement 3/8-16 x 3.75" socket head bolt. Applications: Hobie 18 inboard front crossbar
    BOLT SOC HEAD 3/8-16 X 3.75"
    Misc
    Nacra Shroud Eye Murrays Part# 56-32338 Details: 7/16UNC 17-4 SS Replacement shroud eye for Nacra beachcats.
    NACRA SHROUD EYE
    NACRA
    Recently viewed