Sailing Hardware

382 products

    Sailing Hardware for Hobie, Nacra and Prindle Catamarans

    382 products
    Nut Nylock #10-32 Stainless Steel Thick Murrays Part# 19-2515 Mainsheet block replacement nut. The stainless hex nut with nylock insert will not rust or work loose if properly installed. Fits Hobie Main Traveler Car. Fits Hobie Tiller Hinge Screw. Fits Hobie Masthead Sheave Screw H16 Hobie Getaway Compare to Hobie Part Number 8050201
    NUT NYLOCK #10-32 (SS) THICK
    Misc
    Nut Hex MS #8-32 Stainless Steel Murrays Part# 19-2016 Stainless steel #8-32 hex nut. Measurements are diameter and threads per inch. Compare to Hobie Cat® #8050801.
    HEX NUT MS #8-32 (SS)
    Misc
    Screw PHSMS #8 X 2" Stainless Steel Murrays Part# 19-1624 Stainless steel, pan head, self-tapping, #8 x 2" sheet metal screw
    SCREW PHSMS #8 X 2" (SS)
    Misc
    FHSMS #8 X 1 Stainless Steel Murrays Part# 19-1620 Flat head, self-tapping, stainless steel #8 x 1" sheet metal screw. This screw is commonly used to hold the track endcaps on pre 1997 H16 Jib Traveler Tracks and all H18 Jib Traveler Tracks. Can screw into aluminum or fiberglass.
    SCREW FHSMS #8 X 1" (SS)
    Misc
    Nut Nylock 5/16-18 Low Profile Murrays Part# 50-8050331 Hobie® factory replacement low-profile 5/16-18 nylock nut.  Fits EZ Loc Upper and Lower Rudder Housing Hobie Bravo, Getaway and Wave. Hobie Part# 8050331
    NUT NYLOCK 5/16"-18 LOW PRO
    Hobie
    Clevis Pin 1/4 x 1-3/4" Murrays Part# 22-9809 Stainless steel clevis pin measures 1/4" diameter x 1-3/4" grip length (shoulder to the split ring hole)
    CLEVIS PIN 1/4 X 1-3/4"
    Misc
    Ronstan Swiveling Fork Snap Shackle 72mm Murrays Part# 21-6130 Top quality Ronstan stainless steel swiveling tack shackle with 1/4" clevis pin features heavy duty plunger springs and precision components to ensure dependable service. Body and hasp profiles are designed for easy clearance of lines and fittings when released. High strength-to-weight ratio.
    RONSTAN SWIVELING FORK SNAP SHACKLE 72MM
    Ronstan
    Hobie EZ Loc Lower Rudder Housing Tube Rivet Murrays Part# 50-50313301 Rivet for the lower rudder housing on Hobie Bravo, Getaway and wave EZ Loc Systems.  Hobie Part# 50313301
    HOBIE EZ LOC LOWER RUDDER HOUSING TUBE RIVET
    Hobie
    Solid Rivet 1/8 x 5/16" Brass Murrays Part# 19-5004 Solid Rivet 1/8 x 5/16 Brass Used on sail headboards, clew and tack plates. Hobie Part# 8010020
    SOLID RIVET-BRASS 1/8"
    Misc
    Harken Cleat Adapter with Hardware Murrays Part# 007-50010 Hobie Factory Part 50010
    CLEAT ADAPTER PLATE WITH HARDWARE
    Hobie
    Out of Stock
    Washer 5/16 X 9/16 Flat Murrays Part# 50-8080181 Hobie Part# 8080181
    WASHER FLAT 5/16 X 9/16"
    Hobie
    Bolt Socket Head 3/8-16 X 2.50" Murrays part# 50-8040521 Hobie® factory replacement 3/8-16 x 2.50" socket head bolt is used on Getaway wing and Hobie® 18 rear inboard support. Hobie Part# 8040521
    BOLT 3/8-16 X 2.50"
    Hobie
    Screw 10-32 X 1-1/4" PHMSP Murrays Part# 50-8031071
    SCREW 10-32 X 1-1/4" PHMSP
    Hobie
    Hobie factory replacement long lock screw for EZ Loc rudder system. Specs: 12-24X3/4 long lock PHMS screw Hobie PN 8030411
    EZ LOC LONG SCREW
    Hobie
    Stand Up Spring Conical Light Murrays Part# 21-0319 This soft, conical spring is used for Harken bullet block (e.g. Hobie® 16 jib traveler car and Hobie® spinnaker pole blocks).
    STAND UP SPRING CONICAL LIGHT
    Murrays Sports
    Screw FHSMS #8 X 3/4 Stainless Steel Murrays Part# 19-1621 Flat head, self tapping, stainless steel sheet metal screw #8 x 3/4" Compare to Hobie Part 8031501 Used to mount swivel jam cleat and Jib Car Stop
    SCREW FHSMS #8 X 3/4" (SS)
    Hobie
    Carabiner Hook1/4" x 2-3/8" Murrays Part# 22-4156 Carabiner hook is constructed of 316 stainless steel. Specifications: 1/4" diameter, 2-3/8" length, weighs .08 lb. with 700 lb. breaking strength.
    CARABINER HOOK 1/4" x 2-3/8"
    Misc
    Bolt Hex Head 1/4-20 X 2.25 Stainless Steel Murrays Part# 19-2221 Prindle 16/18 and Hobie® rudder bolt. Stainless steel 1/4-20 x 2-1/4" hex head bolt.
    BOLT HEX HEAD 1/4-20 X 2.25" (SS)
    Misc
    Sister Clip Micro  Murrays Part# 004-7730 The stainless steel micro sister clip is a quick connector with no moving parts. The micro sister clip does not have a slot.
    SISTER CLIP MICRO (EA)
    Murrays Sports
    Rivet AAP 6-6 (3/16 X 3/8) Murrays Part# 19-5012 A rivet gun is required for installation of this 3/16" x 3/8" aluminum pop rivet.
    RIVET AAP 6-6 (3/16 X 3/8)
    Misc
    Ronstan Toggle Pin with Lanyard 1/4 X 3/4" Murrays Part# 21-1153L Stainless steel 1/4" diameter toggle pin replaces 3/4" clevis pin. Secure quick connect/disconnect clevis pin with a lanyard so you loose it.
    RONSTAN TOGGLE PIN WITH LANYARD 1/4 X 3/4"
    Ronstan
    Rivet AAC 3/16 x 5/8 CSK Murrays Part# 50-8010171 Hobie® factory aluminum 3/16" x 5/8" countersunk rivet requires a rivet tool for installation.
    RIVET AAC 6-10 3/16x5/8 CSK
    Hobie
    ROBLINE SMALL SOFT SHACKLE- 6MM SK78
    Robline
    Screw H20 Connector 10-24 X .25" Murrays Part# 50-8032401 Hobie® factory replacement screw for Hobie 20 tiller connector. Stainless steel 10-24 x 1/4" pan-head machine screw with Phillips head. Hobie Part# 8032401
    H-20 CONNECTOR SCREW 10X24X.25"
    Hobie
    Rivet Washer Nylon Commonly used on NACRA catamarans to insulate the stainless rivet from aluminum extrusions. Nacra PN 40200
    RIVET WASHER NYLON
    Murrays Sports
    Out of Stock
    NACRA BOOM PIN
    NACRA
    Safety Pin Stainless Steel Murrays Part# 21-0126 The stainless steel safety pin is an alternative to the split ring, spring clip or cotter pin. Hobie Cat® Part# 20503
    SAFETY PIN STAINLESS STEEL
    Ronstan
    Washer 5/16x3/4" Stainless Steel Murrays Part# 19-4018 Flat stainless steel washer with 5/16" diameter hole.
    WASHER 5/16x3/4" SS
    Misc
    WASHER #8 (WH NYLON) Murrays PN 19-4006WH White nylon washer is used for installation of access ports (hatches).
    WASHER #8 WHITE NYLON
    Misc
    Bolt Hex Head 5/16-18 X 1.5" Murrays Part# 19-2229 Use this stainless steel, 5/16-18 x 1-1/2" hex head bolt as beam strap bolt for Nacra. Substitute for Nacra Sailing factory item #30358. This bolt is also used to hold the cam stop plate on a Hobie Rudder Upper casting. Replaces Hobie Cat® Part# 8040301 and Murrays Part# 56-F164
    BOLT HEX HEAD 5/16-18 X 1.5"
    Misc
    Bolt Hex Head 1/4-20 X 5" (Stainless Steel) Murrays Part# 19-2226 Stainless steel 1/4-20 x 5" hex head bolt is used for Hobie® 18 mast rotation arm. Use #19-2516 nut. Equivalent to Hobie® Part# 8040111
    BOLT HEX HEAD 1/4-20 X 5" (SS)
    Misc
    The heavy duty 8mm Hydrofoil T-Nuts (Stainless Steel) are rectangular M8 channel inserts/T-Nuts. Designed for use in hydrofoil mast tracks.  Stainless steal inserts are an upgrade to the standard Brass inserts.  Great for salt water environments, they resist corrosion. Compatable with all Liquid Force, Lift, Slingshot, FoilMount (stainless only), etc track systems. Specs: M8 standard metric threads which is standard for all hydrofoil tracks. M8 t-nuts also work in windsurfing mast tracks as well
    STAINLESS STEEL M8 T-NUTS
    Misc
    RIVET CCC 6-4 (3/16 X.25 CSK) Murrays Part# 19-5021 This size stainless steel countersunk rivet. 002-1041 stop sleeve is helpful for track instillation as a spacer to fit into the track to help get the rivet flush.
    RIVET CCC 6-4 (3/16 X.25 CSK)
    Misc
    Rivet AAP 6-4 (3/16 X 1/4) Murrays Part# 19-5011 A rivet gun is required for installation of this 3/16" x 1/4" aluminum pop rivet.
    RIVET AAP 6-4 (3/16 X 1/4)
    Misc
    Rivet AAP 6-10 (3/16 X 5/8) Murrays Part# 19-5014 A rivet gun is required for installation of this 3/16" x 5/8" aluminum pop rivet
    RIVET AAP 6-10 (3/16 X 5/8)
    Misc
    Ronstan 5/32" Bow Shackle Murrays Part# 21-0633 Bow shackle with 5/32" pin diameter. Ronstan Part# RF633
    5/32" BOW SHACKLE
    Ronstan
    Rivet CCC 6-8 CSK 18-8 Murrays Part# 19-5026
    RIVET CCC 6-8 CSK 18-8
    Misc
    Nut Nylock Low Profile 5/16-18" Murrays Part# 19-6030
    NUT NYLOCK LOW PROFILE 5/16-18"
    Misc
    Dolphin Striker Eye Bolt H14 Murrays PN 001-0106 This part is used as part of the Murrays H14 Dolphin Striker Kit. Replacement stainless steel post for #01-2083 dolphin striker for Hobie® 14. 19-2524 nylock nut is needed and not included with this part.
    H-14 DOLPHIN STRIKER EYE BOLT
    Murrays Sports
    Dolphin Striker Rod Washer Murrays Part# 56-F152 Washer for Prindle and Nacra dolphin striker rods. Performance Sports factory item# F152
    NACRA/PRINDLE DOLPHIN STRIKER ROD WASHER
    NACRA
    Recently viewed