Sailing Hardware

382 products

    Sailing Hardware for Hobie, Nacra and Prindle Catamarans

    382 products
    M8x30MM SS FLAT HEAD BOLT
    Misc
    CHEATA SPLASH PLATE SCREW
    Murrays Sports
    M8 NYLOCK NUT
    Murrays Sports
    Lock Nut 1/4 X 28 Murrays Part# 002-1047-1 Tubular turnbuckle lock nut. Right hand thread.
    LOCK NUT 1/4 X 28
    Misc
    TIGER GUDGEON SCREW 2008
    Hobie
    Wave Club Traveler Kit Murrays Part# 50-39250000 The Hobie Wave Main Traveler Kit is the Hobie factory main traveler kit for Club Wave includes track, Ronstan cleat, traveler car, mounting plate and rivets.
    WAVE CLUB TRAVELER KIT
    Hobie
    Nacra U-Bracket Bolt Murrays Part#  56-31464 Bolt pan head 1/4 x 1/2" UNC for boom U-bracket. Bolt is also used for Wingseat frame connection
    NACRA U-BRACKET BOLT
    NACRA
    Out of Stock
    Washer Flat 1/2 X 7/8 Murrays Part# 50-8080601 Hobie® factory replacement 1/2" x 7/8" washer. Hobie Part# 8080601
    WASHER FLAT 1/2 X 7/8"
    Hobie
    Out of Stock
    Nut Nylock 3/8-24 Murrays Part# 50-8050511 Replacement 3/8-24 nylock nut is used on Hobie® 14, 16 and 18 dolphin striker rods, as well as Hobie® 17 inboard support. Hobie Part# 8050511
    NUT NYLOCK 3/8-24"
    Hobie
    Nut Stainless Steel 1/4-20" Centerlock Murrays Part# 50-8050121
    NUT STAINLESS STEEL 1/4-20" CENTERLOCK
    Hobie
    Screw 3/8-16 x 4" PHMS-P Murrays Part# 50-8040600 This screw is for holding the wing side leg brace. Hobie Part# 8040600
    SCREW 3/8-16 x 4" PHMS-P
    Hobie
    Bolt 3/8-16 X 2" Murrays Part# 50-8040501 Replacement stainless steel 3/8-16 x 2" bolt is used on Hobie® 18 front and rear crossbars. Hobie Part# 8040501
    BOLT 3/8-16 X 2"
    Hobie
    Bolt 5/16 X 18 X3.5" Murrays Part# 50-8040371 Hobie® factory replacement 5/16-18 x 3-7/16" bolt. Pylon bolt for Hobie® 14 and older 16 (1994 and prior; starting in 1995, boats had newer style castings/pylons). Hobie Part# 8040371
    BOLT 5/16 X 18 X3.5"
    Hobie
    Bolt 3/8-16 X 5" 50-8040061 Hobie® factory 3/8-16 x 5" bolt is used on Hobie 20 Miracle front crossbar. Hobie Part# 8040061
    BOLT 3/8-16 X 5"
    Hobie
    Screw #14 X 3/4 PHSMS Murrays Part3 50-8031891 Hobie® factory replacement #14 x 3/4" pan head self-tapping sheet metal screw with Phillips head. Hobie Part# 8031891
    SCREW #14 X 3/4" PHMS
    Hobie
    Screw 1/4-20 X 3/8 RHMS-P Murrays Part# 50-8030711 Hobie® factory replacement 1/4-20 x 3/8" stainless steel round head machine screw with Phillips head. Use two on Hobie® 20 jib car. Hobie Part# 8030711
    SCREW 1/4-20 X 3/8" RHMS-P
    Hobie
    Washer Flat 1/4 x 5/8" Murrays Part# 50-8080521 Hobie® factory replacement 5/8" x 9/32" flat washer is used on Hobie 18 mast step assembly. Hobie Part# 8080521
    WASHER FLAT 1/4 X 5/8"
    Hobie
    Out of Stock
    Bolt Socket Head 3/8-16 X 3.75" Murrays Part# 50-8040561 Hobie® factory replacement 3/8-16 x 3.75" socket head bolt. Applications: Hobie 18 inboard front crossbar
    BOLT SOC HEAD 3/8-16 X 3.75"
    Misc
    Nacra Shroud Eye Murrays Part# 56-32338 Details: 7/16UNC 17-4 SS Replacement shroud eye for Nacra beachcats.
    NACRA SHROUD EYE
    NACRA
    Hex Bolt 3/8 X 4.25" Murrays Part# 56-F142 3/8" x 4-1/4" hex head bolt is for Prindle front crossbar Performance Sports factory item# F142
    PRINDLE HEX BOLT 3/8 X 4.25"
    NACRA
    Nacra Rudder Pivot Bolt 1/4-20" Murrays Part# 56-F191 Countersunk rudder pivot bolt measures 1/4-20 x 1-7/8"
    NACRA RUDDER PIVOT BOLT 1/4-20"
    NACRA
    NACRA/PRINDLE BOLT FOR GUDGEON 1/4-20X1.25"
    NACRA
    Rudder Bolt Base Inter Murrays Part# 56-F188 1/4-20 x 2" FHMS rudder bolt (base) for all Nacra Inters.
    NACRA RUDDER BOLT BASE
    NACRA
    Out of Stock
    WIZARD HAT UNIVERSAL HYDROFOIL MAST TRACK HARDWARE KIT
    Misc
    Trigger Snap Bronze 2.5" Murrays Part# 27-136800 Lightweight, die-cast, manganese bronze swiveling shackle with overall length of 2-9/16". Weighs 1.5 oz. SWL unspecified.
    TRIGGER SNAP-BRONZE 2.5"
    Misc
    WELDED STAINLESS STEEL RING 3/16"x3/4"
    Misc
    Washer 1/4 Flat Stainless Steel Murrays Part# 19-4016 Thin, flat stainless steel washer measures 1/2" OD (outside diameter) x 1/4" ID (inside diameter)
    WASHER 1/4" FLAT (SS)
    Misc
    Round Head Machine Screw #10-24 X 1 Stainless Steel Phillips Head
    SCREW RHMS #10-24 X 1" (SS)
    Misc
    Screw RHMS #10-24 X 7/8 Stainless Steel Phillips Head Murrays Part# 19-3510 Stainless steel, Phillips round head #10-24 x 7/8" machine screw
    SCREW RHMS #10-24 X 7/8" SS
    Misc
    Screw RHMS #10-32 X 7/8 Stainless Steel Murrays Part# 19-3500 Stainless steel, round head #10-32 x 7/8" machine screw. Measurements are diameter and threads per inch times grip length.
    SCREW RHMS #10-32 X 7/8 (SS)
    Misc
    Screw RHMS #10-24 X 1-1/8" Stainless Steel Murrays Part# 19-3012 Stainless steel, Phillips round head #10-24 x 1-1/8" machine screw
    SCREW RHMS #10-24 X 1-1/8 (SS)
    Misc
    Screw Phillips Head Montel Steel #10-24 X 1.50 Murrays Part# 19-3011 Stainless steel, Phillips pan head #10-24 x 1-1/2" machine screw.
    SCREW PHILLIPS HEAD #10-24 X 1.50 (SS)
    Misc
    Screw PHMS #10-32 X 2" Stainless Steel Murrays Part# 19-2918 Stainless steel, #10-32 x 2" Phillips pan head machine screw. Mainsheet block replacement screw. Also used to mount Harken Cam-Matic cleats #28-0150 and #28-0365 (needs 2 screws).
    SCREW PHMS #10-32 X 2" (SS)
    Misc
    Screw PHMS #10-32 X 7/8" Stainless Steel Murrays Part# 19-2916 Stainless steel #10-32 x 7/8" machine screw has pan head with slot
    SCREW PHMS #10-32 X 7/8" (SS)
    Misc
    Bolt Hex Head 1/2-13 X 3.75 (Stainless Steel) Murrays Part# 19-2240 Stainless steel hex head bolt for older Hobie® 16 pylon. Compare to Hobie® Part#50-8040731
    BOLT HEX HEAD 1/2-13 X 3.75" (SS)
    Misc
    Bolt Hex Head 5/16-18 X 3" (Stainless Steel) Murrays Part# 19-2232 Stainless steel hex head bolt measures 5/16-18 x 3"
    BOLT HEX HEAD 5/16-18 X 3" (SS)
    Misc
    Bolt Allen Head 5/16 18 X 1.5" (Stainless Steel) Murrays Part# 19-2229S Bolt Allen Head 5/16 - 18 X 1.5 (Stainless Steel) - replace hex head bolts used on Hobie 16, 17, 18, 20 Upper adjustable rudder castings. Limited space for Hex head requires thin walled 1/2" socket with 1/6" drive. Socket head bolt uses Allen head tool which is cheap, strong, and compact for on board storage and convenient adjustment.
    BOLT 5/16-18 X 1.5" (SS)
    Misc
    Bolt Allen Head 1/4-20 X 2.5 (Stainless Steel) Murrays Part# 19-2222 Stainless steel Allen head bolt is used on Prindle tiller connector. Measures 1/4-20 x 2.5"
    BOLT ALLEN HEAD 1/4-20 X 2.5" SS
    Misc
    Nut Hex MS #6-32 (Brass) Murrays Part# 19-2010 Brass hex nut fits Pocket Protector kits #01-1001 and #01-1002. Measurements are diameter and threads per inch.
    HEX NUT #6-32 (BRASS)
    Misc
    Screw FHSMS #10 X 1.50 Stainless Steel Murrays Part# 19-1626 Flat head, self-tapping, #10 x 1.50" stainless steel sheet metal screw.
    SCREW FHSMS #10 X 1.50" (SS)
    Misc
    Recently viewed