Sailing Hardware

382 products

    Sailing Hardware for Hobie, Nacra and Prindle Catamarans

    382 products
    Screw 1/4/20x1.25" PHPMS Murrays Part# 50-8032061 Rear Hatch Screw for Hobie Bravo. Hobie Part# 8032061
    SCREW 1/4-20x1.25" PHPMS
    Hobie
    Screw #10 x 1-1/4 PHSMS-P Murrays Part# 50-8030261 Tiller Hinge Screw for Hobie Fiberglass Tiller.
    SCREW #10 x 1-1/4 PHSMS-P
    Hobie
    Hobie Part Number 8030361 (304ss) Bolt Allen Head 5/16 - 18 X 1.25 (Stainless Steel) - replace hex head bolts used on H16, 17, 18, 20
    BOLT SOC HD 5/16-18 X 1.25"
    MISC
    Rivet CCP 4-6 (1/8 X 3/8) Murrays Part# 19-5030 Stainless steel 1/8" x 3/8" rounded pan head rivet.
    RIVET CCP 4-6 (1/8 X 3/8)
    Misc
    RONSTAN SHACKLE WITH SWIVEL 1/4" (JAW/JAW)
    Ronstan
    1/4" Short Halyard Shackle Murrays Part# 22-9343 1-7/32" long with fixed guard pin and spring-loaded 1/4" captive pin. Maximum working load is 1550 lbs.
    1/4" SHORT HALYARD SHACKLE
    Schaefer Marine
    Out of Stock
    NACRA RIVET 4.8x16MM ALUMINUM RVS
    NACRA
    Out of Stock
    ROBLINE SMALL SOFT SHACKLE-14MM SK78
    Robline
    Out of Stock
    ROBLINE SMALL SOFT SHACKLE-12MM SK78
    Robline
    Harken 5mm Snap Shackle Murrays Part# 28-0111 Snap shackles provide one-handed operation for temporary applications that require speed and easy release. Harken® snap shackles also fit a wide variety of blocks and make them removable.
    HARKEN 5MM SNAP SHACKLE
    Harken
    Harken 6mm Snap Shackle Murrays Part# 28-0112 Snap shackles provide one-handed operation for temporary applications that require speed and easy release. Harken® snap shackles also fit a wide variety of blocks and make them removable.
    HARKEN 6MM SNAP SHACKLE
    Harken
    OXEN BLOCK MAIN PAW SPRING
    OXEN BLOCK MAIN PAW SPRING
    Oxen
    1/4" Short Halyard Shackle For Nacra  Murrays Part# 22-9343N Spring tension captive pin maintains steady pressure on sides of shackle under sailing conditions and allows easier opening for quick release. Stainless steel spring. Inside length is 1-7/16". Inside width is 5/8". Pin diameter is 1/4". For use with cable.
    NACRA 1/4" SHORT HALYARD SHACKLE
    Misc
    Out of Stock
    O'PEN SKIFF BOOM WITH ALL HARDWARE
    Tahe Outdoors
    NUT EYE RUDDER
    Murrays Sports
    M8 x 25mm Allen Head Hydrofoil Bolt Murrays Part# 55-0015 The M8 x 25mm Allen Head Hydrofoil Bolts are used on Slingshot, Liquid Force foils and many more. It's always good to have an extra set on hand, in case you loose one. This is your foil mast to board connection bolt.; Works with all M8 board inserts and track inserts Made of corrosion resistant 316 stainless steal.
    M8x25MM SS FLAT HEAD BOLT
    Misc
    M8x30MM SS ALLEN HEAD BOLT
    Misc
    Out of Stock
    BOLT 5/16-18X3/4 HX HD SS
    Misc
    #4 Spur Grommets Set of 144
    GROMMET #4 SPUR Set of 144
    Misc
    Out of Stock
    Upright Solo Righting System H14/16 Murrays Part# 007-1263 This system extends the shroud to make righting your cat by yourself easier. Special care is needed to ensure that the mast is secured, as it can come out of its socket when the product is used. Hobie Part# 1263
    H-14/16 UPRIGHT SOLO RIGHTING SYSTEM
    Murrays Sports
    Out of Stock
    SCREW 10-32 X .75 P-FHMS
    Hobie
    Out of Stock
    Gudgeon Long Locking Screws Murrays Part# 50-8030401 Hobie® gudgeon self-locking #12-24 screws come in a package of 16.
    GUDGEON LONG LOCKING SCREWS (16)
    Hobie
    M4 Nylock Nut Murrays Part# 56-31541
    M4 NYLOCK NUT
    Misc
    Out of Stock
    M4x 16MM PAN HEAD COUNTERSUNK BOLT
    NACRA
    WASHER STAINLESS STEEL 8.4 STANDARD
    Murrays Sports
    Out of Stock
    WASHER STAINLESS STEEL 4.3 STANDARD
    Murrays Sports
    QR PIN DELUXE 3/16 X 1/2"
    Murrays Sports
    Out of Stock
    BOLT 3/8-16 x 5.75 SOCKET HEAD
    Misc
    Out of Stock
    BOLT 3/8-16x4-1/2 SOCKET HEAD
    Hobie
    Lock Nut 1/4 X 28 Murrays Part# 002-1047-1 Tubular turnbuckle lock nut. Right hand thread.
    LOCK NUT 1/4 X 28
    Misc
    WIRE STUD LEFT 1/8" (SS)
    Misc
    Out of Stock
    Lock Nut 1/4 X 28 Murrays Part# 002-1047-1 Tubular turnbuckle lock nut. Right hand thread.
    LOCK NUT 1/4 X 28
    Misc
    OXEN BLOCK INNER HUB CAM
    OXEN BLOCK INNER HUB CAM
    Oxen
    OXEN BLOCK TRIP LEVER PAW (PLASTIC)
    OXEN BLOCK PASTIC TRIP LEVER
    Oxen
    OXEN BLOCK MAIN PAW
    OXEN BLOCK MAIN PAW
    Oxen
    Out of Stock
    BOLT 3/8-16x4" HX HD MST HV
    Misc
    Screw #10 x 3/4 PHSMPH Murrays Part# 50-8031131
    SCREW #10 x 3/4 PHSMPH
    Hobie
    European Tiller Crossbar Violon Screw Murrays Part# 51-99221301 Designed for use with The French Hobie tiller. Compatible with 19-2522 8mm Nylock nut. Not compatible with shroud anchor bars.
    EUROPEAN TILLER CROSSBAR VIOLON SCREW
    Hobie
    Gooseneck Bolt Murrays Part# 56-F131 3/8" x 1-1/2" gooseneck bolt for Nacra 5.2 and all Prindles. Performance Sports factory item # F131
    PRINDLE/NACRA GOOSENECK BOLT
    NACRA
    Washer Stainless Steel 5/8 X 1-5/16" Murrays Part# 50-8080711 Hobie® factory replacement stainless steel 5/8" x 1-5/16" washer. This is the dolphin striker washer on Hobie 20 Miracle and is also used on the Hobie Getaway mast step system. Hobie Part# 8080711
    WASHER SS 5/8 X 1-5/16"
    Hobie
    Recently viewed