Sailing Hardware

382 products

Sailing Hardware for Hobie, Nacra and Prindle Catamarans

382 products

Sort

Comptip Cap Plug

Murrays Part# 50-8090900

This part is used to seal the hole in the Comptip of a Hobie cat after the expanding foam has been put in.

Hobie Part# 8090900

COMP-TIP CAP PLUG

Bolt Hex 5/16-18 X 1"

Murrays Part# 50-8040171

Hobie® factory hex head bolt measures 5/16-18 x 1". Used on #07-1953 Tiller Connector for Hobie® 20.

Hobie Part# 8040171

BOLT HEX 5/16-18 X 1"

Screw 5/16-18 X 2.5" Socket Head

Murrays Part# 50-8032221

Hobie® factory replacement socket head screw bolt is 5/16-18 x 2-1/2". Hobie 17 and 17 Sport front and rear crossbar bolt.

Hobie Part# 8032221

SCREW 5/16 X 18 X 2.5" SOCKET HEAD

Screw Socket Head 5/16-24 x 2"

Murrays Part# 50-8031821

Hobie® factory replacement 5/16-24 x 2" socket head stud. Used in Hobie 18SX wing mounting kit.

Hobie Part# 8031821

SOCKET HEAD SCREW 5/16-24x2"

Wing Mount Bar 2 x 1/2"

Murrays Part# 19-0020

5/16-18" Hole

WING MOUNT BAR 2.5 x 1/2"

WASHER STAINLESS STEEL 1/4 x 1/2 x .032"

Dolphin Sticker Rod Nut

Murrays Part# 56-F151

9/16" stainless nut for Nacra dolphin striker mast support rod. Used on boats built after 1983. Before threading nut onto rod, use grease or anti-seize on threads of rod to prevent thread galling.

Performance Sports factory item #F151.

NACRA DOLPHIN STRIKER ROD NUT

Hex Bolt5/16 X 4.25"
Murrays Part# 56-F104
Hexcap bolt measures 5/16 x 4-1/4" and is used on the front crossbar (outboard) of Prindle 15/16/Escape and older Nacras. Performance Sports factory item #F104.

PRINDLE/ESCAPE/NACRA HEX BOLT 5/16 X 4.25"

Harken Screw: Cleat Position (Short)

Murrays Part# 28-HFS1

Short screw is used to adjust cam cleat angle position on Harken "Classic" (not Carbo) base blocks.

HARKEN SCREW: CLEAT POSITION (SHORT)

Heavy Duty Swivel with Aluminum Cam Roller Fairlead

Murrays Part# 25-3020

Swivel cam cleats are ideal for main traveler control and up-release jib cleating systems. This is a Murrays product that features an Aluminum Harken 150 cam cleat, and HD swivel plate and a HD roller fairlead. The advantage to the roller fairlead is that it can take a larger line diameter, up to 1/2", and handle heavy loads at extreme angles. Making it ideal for larger catamarans and sailors in high wind areas.

ROLLER FAIRLEAD KIT (SWIVEL)

Ronstan Block Hanger

Murrays Part# 21-0180

The Ronstan block hanger enables you to hang a block from the boom. Constructed of grade 316 stainless steel, it measures about 3" length overall and has four 5mm (3/16") diameter fixing holes with 1" hole spacing. The block hanger is not a Hobie® factory replacement part, but it can be bent to fit your boom and holes can be drilled for your application. Use four #19-5031 6-4 rivets for installation. Weighs .7 oz. 64mm (2 1/2") long. 4 x 5mm (3/16") dia.

RONSTAN BLOCK HANGER

Nut Nylock 3/8-16" Stainless Steel

Murrays Part# 19-2524

Stainless 3/8-16 hex nut with nylock insert will not rust or work loose if properly installed. Used on newer (1994) Hobie 16 pylon bolt.

Hobie Part# 8050521

NUT NYLOCK 3/8-16" (SS)

Bolt Hex Head 1/4-20 X 4.5" (Stainless Steel)

Murrays Part# 19-2227

Stainless steel mast bolt for Hobie® 20 is 1/4-20 x 4-1/2" long. Also fits Hobie® 17/20 and Nacra mast rotation arm (#25-3040)

BOLT HEX HEAD 1/4-20 X 4.5" (SS)

Screw FHMS #8-32 X 3/4 Stainless Steel

Murrays Part# 19-1516

Stainless steel flat head #8-32 x 3/4" machine screw.

SCREW FHMS #8-32 X 3/4" (SS)

Screw FHMS #8-32 X 1"Stainless Steel
Murrays Part# 19-1517

Stainless steel #8-32 x 1" flat head screw can be used for port installation.

Compare to Hobie Cat® Part# 8031231

SCREW FHMS #8-32 X 1" (SS)

CHANNEL INSERT M4 - .7mm with SCREW

Clevis Pin Headless 3/16 X 1-1/2
Murrays Part# 22-9811
Stainless steel mast step hinge pin for Hobie® 16 has a hole on each end. Measures 3/16" diameter by 1-1/2" long.
Part of the Hobie mast step link kit 21380001

HEADLESS CLEVIS PIN 3/16 X 2-1/8"

Clevis Pin 5/16 x 2-3/16"

Murrays Part# 56-4586

Uses:

This 5/16" x 2-3/16" clevis pin is for all Inter rudder assemblies.
Mast step pin for Hobie 21SE 21SC 

Nacra sailing factory item# 30427

Same as Hobie Part# 8020611

CLEVIS PIN 5/16 x 2 3/16"

Rivet Semi 3/16x27/32 Stainless Steal

Murrays Part# 50-8012062

Hobie Halyard Twist Shackle

Murrays Part# 50-60670000

Classic 3/16 inch stainless steel twist shackle from Hobie Cat.

Hobie Part# 60670000

HOBIE HALYARD TWIST SHACKLE

ROBLINE SMALL SOFT SHACKLE-2.5MM SK78

F-ONE M6X15MM TORQUES HEAD SCREW (4)

Washer Nylon 5/16"

Murrays Part# 50-8080681

Washer for tiller connector rod #50-40530001. Hobie® factory item.

Hobie Part# 8080681

WASHER NYLON 5/16"

Nut 3/8-16 HX Nylock-LP

Murrays Part# 50-8050540

NUT 3/8-16" HX NYLOCK-LP

Screw THMS 1/4-20 X 1-5/8"

Murrays Part# 50-8030601

Hobie® factory replacement 1/4-20 x 1-5/8" screw.

Hobie Part# 8030601

SCREW THMS 1/4-20 X 1-5/8"

Screw 12-24 x 3/4 RHMS-P Stainless Steel
Murrays Part# 50-8030170
Hobie Part# 8030170

SCREW 12-24 x 3/4 RHMS-P SS

Centerboard Lock Screw 10-32X1" FHMS
Murrays Part# 56-F144
#10-32 X 1" FMHS centerboard lock screw for Prindle 18.2 and 19

PRINDLE CENTERBOARD LOCK SCREW 10-32X1" FHMS

Fast Eye Snap Brass 2-1/8"

Murrays Part# 27-136120

2-1/8" brass snap hook is convenient, but should not be used in critical, high-load situations.

FAST EYE SNAP BRASS 2-1/8"

Ring: 1/4 X 2 Diameter
(Stainless Steel)

Murrays Part# 25-3050

1/4" x 2" stainless ring can be used for Prindle-style jib halyards.

RING: 1/4 X 2" DIAMETER (SS)

Screw RHMS #10-32 X 3/4
Stainless Steel Slot Head
Murrays Part# 19-2912
Stainless steel slotted round head #10-32 x 3/4" machine screw is used on windsurfing fins.

SCREW RHMS #10-32 X 3/4 (SS)

Bolt Hex Head 5/16-18 X 4.50" (Stainless Steel)

Murrays Part# 19-2237

Stainless steel hex head bolt for Prindle mast rotation control arm. Use #19-2520 nylock nut.

This bolt is a replacement for item #56-F110

Comparable to Hobie Part# 8040211

BOLT HEX HEAD 5/16-18 X 4.50" SS

Bolt Hex Head 1/4-20 X 3.5"
Stainless Steel

Murrays Part# 19-2224

Stainless steel hex head bolt measures 1/4-20 x 3-1/2"

Pylon Bolt for newer H16

Hobie Part# 8040361

BOLT 1/4-20 X 3.5" (SS)

Nut Hex MS #8-32 (White Nylon)
Murrays Part# 19-2020WH
White nylon #8-32 nut used for installation of ports.

NUT HEX MS #8-32 (WH NYLON)

Tracker Sheave Spacer

Murrays Part# 007-1052

The standard replacement sheave spacer for the traveler on all Hobie® 14, 16 and newer 17's.

Sold Individually

Hobie Cat® Part# 11860000.

TRACKER SHEAVE SPACER (EA)

Washer 5/16 x 3/4 Flat SS

Murrays Part# 50-8080671

EZ Loc Rudder Assembly Lower Bolt Washer for Hobie Bravo, Getaway and Wave

Hobie Part# 8080671

WASHER STAINLESS STEEL 5/16 x 3/4" FLAT

Screw RHMS 1/4-20 X 1"

Murrays Part# 50-8030211

Hobie® factory replacement round head machine screw measures 1/4-20 x 1". Measurements are diameter and threads per inch times grip length.

Applications:
Hobie 18 - Shroud anchor plate screw

SCREW RHMS 1/4-20 X 1"

1/4" FAST SHACKLE

Rivet MCP 8-6 (1/4 x 3/8)

Murrays Part# 19-5042

Rounded pan head 1/4" x 3/8" Monel rivet.

RIVET MCP 8-6 (1/4 x 3/8)

Ronstan Swivel Shackle 3/16" (Jaw/Jaw)

Murrays Part# 21-0120

Ronstan's swivel shackle has 3/16" diameter pins and 1430 lb. breaking load. Bodies and pins are constructed of grade 316 stainless steel. 1-1/4" length from centers of pins. Weighs .7 oz.

Specific Details:

A (in) 3/16
B (in) 15/32
C (in) 1 1/4
E (in) 11/32

Ronstan Part# RF120

RONSTAN SWIVEL SHACKLE 3/16" (JAW/JAW)

Clevis Pin 1/4 x 2-1/4"

Murrays Part# 56-4587

1/4 x 2-1/4" clevis pin for all Inter rudder assemblies.

Used to hold tiller crossbar assembly to tendon.

Nacra sailing factory item# 30428

CLEVIS PIN 1/4 x 2 1/4"

Previous 1 … 3 4 5 6 7 … 10 Next

Recently viewed

Sailing Hardware