Sailing Hardware

382 products

    Sailing Hardware for Hobie, Nacra and Prindle Catamarans

    382 products
    The F-One M6 x 32mm Titanium Hydrofoil Screws are stronger and more corrosion resistant than stainless steal foil hardware. Used for the mast to fuselage connection on all F-One carbon foils.
    F-ONE M6x32MM TITANIUM HYDROFOIL SCREWS (3)
    F-One
    Rivet Solid A 4-6 (1/8 X 3/8) Murrays Part# 19-5005 Solid aluminum 1/8" x 3/8" rivet is designed to be set with a hammer.
    RIVET SOLID A 4-6 (1/8x3/8")
    Misc
    Nylon Washer Internal Casting Prindle Murrays Part# 56-F118 Nylon washer is used on Prindle rudder casting to separate the upper sheaves to help keep the line from fouling. Order four per side to remove as much slop as possible. Performance Sports factory item #F118
    PRINDLE NYLON WASHER INTERNAL CASTING
    NACRA
    M6 x 25mm Titanium Hydrofoil Screws Murrays Part# 55-0025T The M6 x 25mm Titanium Hydrofoil Screws are stronger and more corrosion resistant than stainless steal foil hardware. Compatible with all M6 foil track inserts. The 25mm length is used for both board to foil connection as well as foil assembly. Commonly used with F-One, Naish, Airush, Takuma, Axis, Sab foil, Armstrong and more. Titanium foil hardware does not require greasing or regular checking. Titanium does not corrode or seize
    M6 x 25mm Titanium Hydrofoil Screws Murrays Part# 55-0025T The M6 x 25mm Titanium Hydrofoil Screws are stronger and more corrosion resistant than stainless steal foil hardware. Compatible with all M6 foil track inserts. The 25mm length is used for both board to foil connection as well as foil assembly. Commonly used with F-One, Naish, Airush, Takuma, Axis, Sab foil, Armstrong and more. Titanium foil hardware does not require greasing or regular checking. Titanium does not corrode or seize
    M6x25MM TITANIUM HYDROFOIL SCREWS
    Murrays Sports
    Screw RHMS #12-24 X 1.25 Stainless Steel Murrays Part# 19-3520 Stainless steel, round head #12-24 x 1.25" machine screw is a replacement screw for Hobie® rudder gudgeon.
    SCREW RHMS #12-24 X 1.25 (SS)
    Misc
    3/16 X 1-1/4" Clevis Pin Murrays Part# 22-9807 Stainless steel clevis pin. Measurement is 3/16" diameter x 1-1/4" grip length (shoulder to the split ring hole). Can replace Hobie Part# 8020340 Hobie Wave Mast Head Sheave Pin
    CLEVIS PIN 3/16 X 1-1/4
    Misc
    Snap Shackle with Swivel Eye Murrays Part# 22-4521 2-3/4" long stainless steel snap shackle with swivel eye has 1/2" diameter eye. SWL 1000 lbs. Weighs 2.4 oz.
    SNAP SHACKLE WITH SWIVEL EYE
    Misc
    Spare Parts Kit: Hobie Wave and Getaway, Hobie part number 30308
    WAVE/GETAWAY SPARE PARTS KIT
    Murrays Sports
    Washer 3/8 X 3/4 Nylon for 07-1953 Murrays Part# 50-8080691 Washer for tiller arm bolt #50-8040171. Hobie® factory item
    WASHER NYLON 3/8 X 3/4"
    Hobie
    Nut Low Profile 5/16-24 Nylock Murrays Part# 50-8050341 Hobie® factory replacement 5/16-24 low-profile nylock nut. Used in Hobie 18SX wings mounting bar kit (#50-65071001). Hobie Part# 8050341
    NUT LOW PROFILE 5/16-24" NYLOCK
    Hobie
    M6 x 25mm Stainless Steel Torx Head Screw The M6 x 25mm Stainless Steel Torx Head Screw is a very common size hydrofoil mounting screw. Compatible with all M6 foil track inserts and standard on F-One Rocket Wing Boards and Naish Hover Boards. Also used in foil assembly on F-One Carbon and FCT foils. Sold in a package of 4 
    F-ONE M6 STAINLESS STEEL TORX HEAD SCREW (4)
    F-One
    1/2 BALL (NYLON) - Hobie half round washer spacer tiller connector - Hobie part number 11510000 HOBIE HALF SPHERE TILLER CONNECTOR
    Tiller Connection Kit Murrays Part# 001-2061 The Murrays Tiller Connection Kit assures consistent rudder alignment through the full rudder sweep. Spring-loaded half balls and contoured spacers take the slop out of the tiller-to-crossbar connection on Hobie Cats. Racing class legal. Each kit contains 2 connectors to join the tiller crossbar to the tiller arms. Compare to Hobie Cat® #3052. Applications:; Hobie 14, 16, 17, 18, 18SX
    NYLON 1/2" BALL
    Murrays Sports
    Screw RHMS 1/4-20 X 1/2" Stainless Steel Murrays Part# 19-3019 Stainless steel, Phillips pan head 1/4-20 x 1/2" machine screw is used to fasten mast bearing on post-1990 Hobie® 18. Compare to Hobie 8032011
    SCREW RHMS 1/4-20 X 1/2" (SS)
    Misc
    Made from 18 stainless steel these set screws are chemical resistant and may be mildly magnetic. They have a thin edge that digs into the contact surface for a secure hold. Length listed is the overall length. Screw for the Hobie 18 wing mount kit. 65071001
    SOCKET SCREW 5/16-18 x 2"
    Misc
    Nut Nylock 1/2-13" Stainless Steel Thin Murrays Part# 19-2531 Thin stainless steel 1/2-13 hex nut with nylock insert will not rust or work loose if properly installed. Used on 1/2" pylon bolt on most older Hobie 16's (changed to 3/8" in 1994). Equivalent to Hobie #8050631.
    NUT NYLOCK 1/2-13 (SS) THIN
    Misc
    Ronstan Stainless Steel Twisted D Shackle, 1/4" Pin, Coined Head Murrays Part# 21-0629 Ronstan's twisted D shackle is constructed of 316 stainless steel and has a 1/4" pin. PL breaking load is 3090 lb.; UDL breaking load is 5070 lb. Weighs 1.1 oz.
    RONSTAN STAINLESS STEEL TWISTED D SHACKLE, 1/4" PIN, COINED HEAD
    Ronstan
    Harken 6mm "D" Shackle Murrays Part# 28-2108 For use with Harken main sheet blocks. Forged stainless steel shackles are polished to a high luster and are stamped with the screw pin diameter. "D" shackles are the most common type of shackle. They are best suited for aligned attachment points.
    HARKEN 6MM "D" SHACKLE
    Harken
    Stand Up Spring Conical Medium Murrays Part# 21-0320 This medium conical stand-up spring is used for Oxen blocks, OK car, etc.
    STAND UP SPRING CONICAL MEDIUM
    Murrays Sports
    Titanium Hydrofoil Track Lock Universal Track Nut Murrays part# 55-0030T The Only Titanium Universal Track Nut! These track nuts lock into position with a set screw, setting them apart from other track nuts on the market. They were designed to be used with any foil board track and are made from 100% GR5 Titanium so corrosion will never be an issue. They are designed to work with any foil system whether it uses m6 or m8 hardware. The Track Lock Universal track Nut comes with both M6 and M8 threaded screw
    TITANIUM HYDROFOIL TRACK LOCK UNIVERSAL TRACK NUT (4)
    Misc
    Screw PHMS 1/4-20 X 1" Stainless Steel Murrays Part# 19-3020 Stainless steel, slotted pan head 1/4-20 x 1" machine screw to fasten mast bearing on pre-1990 Hobie® 18. Other uses include universal Prindle/Nacra bow plate and bow tang on Prindle 15/16/18/Escape. Replaces Murrays item #56-F125.
    1/4-20 X 1" Stainless Steel Screw
    Misc
    Hobie 3062 1/4" Bow shackle with quick release pin
    QUICK RELEASE 1/4" BOW SHACKLE
    Murrays Sports
    Quick-Release Convenience Package: H16 Murrays Part# 001-3231 This package makes set-up and take-down of your Hobie 16® more convenient. Kit includes: One #18-4R125 Quick Release Pin for hiking stick to crossbar connection. One #18-3M075L Quick Release Pin with Lanyard for mainsheet block to traveler car connection. One #21-1032 Quick Twist Halyard Shackle for jibsheet blocks to jib clew boom to mast connection. One #21-1155L Toggle Pin with Lanyard for forestay to adjuster connection. Four #01-0127 Car
    H-16 QUICK RELEASE CONVENIENCE PACKAGE
    Murrays Sports
    RIVET SOLID BRASS 6-6 (3/16x3/8") Solid Brass 3/16" x 3/8" rivet is designed to be set with a hammer. Commonly used to secure sail luff plates, clew plates, tack plates and headboards.
    RIVET SOLID BRASS 3/16"
    Misc
    Ronstan Stainless Steel D Shackle, 5/32" Pin, Slotted Head Murrays Part# 21-0615 Ronstan stainless D shackle has 5/32" slot head pin. Features: High strength to weight ratio Premium quality, rated Grade 316 stainless steel bodies and pins
    RONSTAN STAINLESS STEEL D SHACKLE, 5/32" PIN, SLOTTED HEAD
    Ronstan
    Hobie Drain Plug Screw Murrays Part# 50-8031731 This screw is used to hold the rudder housing in the back of many of the Hobie Beach cats. H14, H16, H17, H18 Hobie Part# 8031731
    HOBIE DRAIN PLUG SCREW
    Hobie
    Screw Boom Clamp 10-24 X 1.25 FHMS-S Murrays Part# 50-8031011 Hobie® factory replacement screw for the boom clamp (#50-61711000) on the Hobie 18. #10-24 x 1-1/4" flat head machine stainless screw with Phillips head. Hobie Part# 8031011
    SCREW 10-24x 1-1/4"
    Hobie
    CINCH RING 5/16 8mm
    Misc
    Murrays M8 x 25mm Titanium Hydrofoil Screws
    M8x25mm TITANIUM TORX BOLT
    Murrays Sports
    M6 T-Nuts: Stainless Steal Hydrofoil Mast Track Inserts slides foil
    STAINLESS STEEL M6 T-NUT
    Misc
    Screw PHMS #10-32 X 5/8" Stainless Steel Murrays Part# 19-2910 Stainless steel, pan Phillips head, #10-32 x 5/8" machine screw.
    SCREW PHMS #10-32 X 5/8 (SS)
    Misc
    Screw PHSMS #8 X 2" Stainless Steel Murrays Part# 19-1624 Stainless steel, pan head, self-tapping, #8 x 2" sheet metal screw
    SCREW PHSMS #8 X 2" (SS)
    Misc
    Screw 12x24x1 Pan Head (Long Lock) Murrays Part# 50-8030402 This screw is used to hold the rudder gudgeons on the back of the boat.  Hobie Part# 8030402
    SCREW 12x24x1 PAN HEAD (LONG LOCK)
    Hobie
    Ronstan Swiveling Fork Snap Shackle 72mm Murrays Part# 21-6130 Top quality Ronstan stainless steel swiveling tack shackle with 1/4" clevis pin features heavy duty plunger springs and precision components to ensure dependable service. Body and hasp profiles are designed for easy clearance of lines and fittings when released. High strength-to-weight ratio.
    RONSTAN SWIVELING FORK SNAP SHACKLE 72MM
    Ronstan
    Rivet AAC 3/16 x 5/8 CSK Murrays Part# 50-8010171 Hobie® factory aluminum 3/16" x 5/8" countersunk rivet requires a rivet tool for installation.
    RIVET AAC 6-10 3/16x5/8 CSK
    Hobie
    Clevis Pin 1/4 x .83" Murrays Part# 50-8020391 Hobie® factory clevis pin measures 1/4" diameter x .8285" grip length (shoulder to the split ring hole).
    CLEVIS PIN 1/4 X .83"
    Hobie
    Solid Rivet 1/8 x 5/16" Brass Murrays Part# 19-5004 Solid Rivet 1/8 x 5/16 Brass Used on sail headboards, clew and tack plates. Hobie Part# 8010020
    SOLID RIVET-BRASS 1/8"
    Misc
    Rivet 6-18 Aluminum RIVET POP 3/16 x 1 1/8th inch aluminum rivet to hold the traveler control sheave on a H16 front crossbar from late 90s to current. Hobie Part Number 8011251
    RIVET 6-18 ALUMINUM
    Hobie
    ROBLINE SMALL SOFT SHACKLE- 6MM SK78
    Robline
    Ronstan Small Soft Shackle - 4mm SK78 Murrays Part# 21-DSH4 The Robline Small Soft Shackle is a great alternative to the metal shackle, with no clevis pins to loose in the water or sand. Soft shackles are also very easy on the boat as they are soft and flexible Quick and easy way to attach jib clew blocks to the jib and the main sheet blocks to the main sail.
    ROBLINE 4MM SMALL SOFT SHACKLE SK78
    Robline
    Out of Stock
    Spare Parts Kit: Nacra Murrays Part# 001-8221 Why lose a weekend of sailing due to a missing part? Stored in a 5" x 12" zippered pouch, this kit contains the most frequently lost and needed items for your Nacra catamaran. Includes shackle tool, two drain plugs with gaskets, aluminum rudder pins, clevis pins and rings kit, 3/16" bow shackle, 1/4" bow shackle and batten tie strings. Pouch comes in assorted colors. Newer Nacras use pintles instead of rudder pins, so the included rudder pins are not
    NACRA SPARE PARTS KIT
    Murrays Sports
    Recently viewed