Sailing Hardware

381 products

    Sailing Hardware for Hobie, Nacra and Prindle Catamarans

    381 products
    Screw Delrin 3/8-16 X .75" Murrays Part# 50-8032001 Hobie® factory replacement 3/8-16 x 3/4" Delrin screw is used as rudder rake adjustment screw on Pre-EZ Lock Rudder System. Hobie Part# 8032001
    SCREW DELRIN 3/8-16 X .75"
    Hobie
    Hobie 18 clevis pin kit includes 13 pieces: mast hinge pin, clevis pin assortment, and split ring assortment. Compare to Hobie Part Number #30304 Murrays.com
    H-18 PINS & RINGS KIT
    Murrays Sports
    Replace a 3/16" bow shackle with this quick-release version to add convenience. Can be used on 2-1/4" blocks. Compare to Hobie Cat® #3062.
    QUICK RELEASE 3/16" BOW SHACKLE
    Murrays Sports
    Out of Stock
    Rivet MCP 6-6 (3/16 X 3/8) Murrays Part# 19-5022 Rounded pan head 3/16" x 3/8" Monel rivet. Compare to SS version Hobie Cat® #8010131.
    RIVET MCP 6-6
    Misc
    Screw RHMS 5/16-18 X 1.25" Stainless Steel Murrays Part# 19-3530 Stainless steel round head machine screw measures 5/16-18 x 1-1/4". Bow Tang Bolt Equivalent to Hobie Cat® Part# 8030301
    SCREW RHMS 5/16-18 X 1.25 (SS)
    Misc
    Harken 22mm Spring Murrays Part# 28-0071 Harken universal stand-up spring supports blocks on pad eyes, eyestraps, bases and traveler cars. Weight: .32 oz. This works well with snap shackle w/tack to upgrade a typical beachcat mainsheet system.
    HARKEN 22MM SPRING
    Harken
    NUT SQUARE 10-32 Murrays Part# 50-8051301 Hobie® factory replacement stainless steel 10-32 square nut can be used when mounting downhaul/halyard cleat on Hobie® 14 or 16. Also can be used for mounting H17 trampoline eye straps. Use 19-2910 screw. Hobie Part# 8051301
    NUT SQUARE 10-32
    Hobie
    Stainless steel cinch ring is also known as a hog ring. Use shock cord seizing pliers for a smooth installation; standard pliers can give a suitable cinch.
    CINCH RING 1/4" 6mm (X-0)
    Misc
    Used for tiller connection on Hobie Cats®. The stainless 1/4-20 stainless steel hex nut with nylock insert will not rust or work loose if properly installed. Equivalent to Hobie #8050111. Also Equivalent to Nacra/Prindle F123 gudgon nut for all Prindle and older Nacras. Applications: Hobie 18 / H18: Bow Tang Nut Qty: 6 Rudder Adjustment: 1 Hobie Getaway: Forestay Yoke Nut
    NYLOCK NUT 1/4-20 SS
    Misc
    Clevis Pin 3/16 X 5/8" Murrays Part# 22-9805 Stainless steel clevis pin. Measurement is 3/16" diameter x 5/8" grip length (shoulder to the split ring hole). Hobie Cat Part number 8020041
    3/16 X 5/8"Clevis Pin Murrays Part# 22-9805 Stainless steel clevis pin. Measurement is 3/16" diameter x 5/8" grip length (shoulder to the split ring hole). Compare to Hobie Cat® Part# 8020041
    CLEVIS PIN 3/16 X 5/8"
    Misc
    Ronstan Stainless Steel Long D Shackle, 1/4" Pin, Coined Head Murrays Part# 21-0623 This stainless steel long D-shackle has a 1/4" diameter pin. Great for adding replacing the clevis pin on your H18 bridles for a spinnaker project.
    RONSTAN STAINLESS STEEL LONG D SHACKLE, 1/4" PIN, COINED HEAD
    Ronstan
    Mini Cam Kit for Elliptical Surface Murrays Part# 001-0112 Mount a mini cam cleat, in any orientation, on almost any elliptical surface. Fits most elliptical surfaces: Hobie®, Nacra, Prindle masts and most others; Hobie and Prindle main beams, etc. You drill holes in the pad to suit your desired line/cleat orientation.
    MINI CAM KIT FOR ELLIPTICAL SURFACE
    Murrays Sports
    Clevis Pin 1/4 X 3/4" Murrays Part# 56-4012 The Clevis Pin 1/4 X 3/4" is used on Prindle rudders, Nacra mast head sheave and as Nacra/Prindle shroud pin. Prindle Part# 4012
    CLEVIS PIN 1/4 X 3/4"
    NACRA
    Out of Stock
    Swivel Mount Base with Fasteners Murrays Part# 007-1162 The offset base pad kit fits Hobie® and Prindle elliptical crossbars. Includes injection-molded plastic base and fasteners. Replacement fasteners are also available (requires 3 self-tapping screws #19-1620, 1 machine screw #19-1516, and 1 nut #19-2016). Hobie Cat® Part# 1162
    PRINDLE SWIVEL MOUNT BASE WITH FASTENERS
    Hobie
    Prindle Spare Parts Kit Murrays Part# 001-5221 Why lose a weekend of sailing due to a missing part? Stored in a 5" x 12" zippered pouch, the Murrays Spare Parts Kit contains the most frequently lost and needed items. Includes shackle tool, two drain plugs with gaskets, aluminum rudder pins, clevis pins and rings kit, 3/16" bow shackle, 1/4" bow shackle and batten tie line. Pouch comes in assorted colors as available.
    PRINDLE SPARE PARTS KIT
    Murrays Sports
    M8x30mm TITANIUM TORX BOLT
    Murrays Sports
    Rivet MSP 6-10 3/16 X 5/8" PH Murrays Part# 19-5023 Rounded pan head 3/16" x 5/8" Monel rivet. Compare to Hobie Cat® Part# 8010121
    RIVET MSP 6-10 3/16 X 5/8" PH
    Hobie
    M8 T-Nuts: Titanium Hydrofoil Mast Track Inserts
    TITANIUM M8 T-NUT: HYDROFOIL MAST TRACK INSERTS
    Misc
    Clevis Pin1/4 X 1" Murrays Part# 50-8020401 Hobie® factory replacement 1/4" x 1" clevis pin. Compare to Hobie Part Number 8020411 Applications: H18 / Hobie 18 SX Tiller Yoke Clevis Pin: 1
    CLEVIS PIN 1/4 X 1"
    Hobie
    Spare Parts Kit: H18 Murrays Part# 001-4221 Why lose a weekend of sailing due to a missing part? Stored in a 5" x 12" zippered pouch, this kit for Hobie® 18 contains the most frequently lost and needed items. Includes shackle tool, two drain plugs with gaskets, aluminum rudder pins, clevis pins and rings kit, 3/16" bow shackle, 1/4" bow shackle and batten tie strings. Pouch comes in assorted colors. Compare to Hobie Cat® #30307.
    H-18 SPARE PARTS KIT:
    Murrays Sports
    Out of Stock
    Bow Shackle 3/16” with hole
    Misc
    Save $10
    Stainless steel clevis pin. Measurement is 1/4" diameter x 1-3/4" grip length (shoulder to the split ring hole). Uses: This pin replaces #56-7809, gooseneck clevis pin for Nacra 5.2 and all Prindles. Hobie 18 main traveler car  Prindle Part# 6004  Comparable to Hobie Cat® Part# 8020431
    1/4 X 1-3/8" Clevis Pin Murrays Part# 22-9804 Stainless steel clevis pin. Measurement is 1/4" diameter x 1-3/4" grip length (shoulder to the split ring hole). This pin replaces #56-7809, gooseneck clevis pin for Nacra 5.2 and all Prindles. Prindle Part# 6004 Comparable to Hobie Cat® Part# 8020431
    CLEVIS PIN 1/4 X 1-3/8"
    Misc
    Harken Standard Cam Cleat Spring Murrays Part# 28-0056 The Harken Cam-Matic Replacement Spring for 150, 365 for cleats #28-0150 and #28-0365.  Harken Part# MS-006
    HARKEN STANDARD CAM CLEAT SPRING
    Harken
    Ronstan 3/16 Twisted D Shackle Murrays Part# 21-0628 Stainless steel twisted D-shackle has a 3/16" pin.
    RONSTAN 3/16" TWISTED D SHACKLE
    Ronstan
    Ronstan Halyard Shackle, 1/4" Pin Murrays Part# 21-1033 The Ronstan Halyard Shackle with Twist Pin's main advantage is that you cant loose any of it once its attached. The top pin holds it on and the bottom pin dose not come out. Never loose your shackle pins again! The 1/4" Halyard Shackle with Twist Pin is used in the following Murrays Products: 02-4383-50 N-5.5SL Jib Halyard w/Shackle
    RONSTAN HALYARD SHACKLE, 1/4" PIN
    Ronstan
    Out of Stock
    HOBIE ROLLER FURLING DRUM 1" NYLINER
    Hobie
    Shackle Pin Only 1/4 Threaded Murrays Part# 21-0033 Threaded stainless pin fits 1/4" Ronstan D or bow shackle.
    SHACKLE PIN ONLY 1/4" THREADED
    Ronstan
    Shackle Pin Only 3/16 Threaded Murrays Part# 21-0032 Threaded stainless pin fits 3/16" Ronstan D or bow shackle.
    SHACKLE PIN ONLY 3/16" THREADED
    Ronstan
    Bolt Hex Head 5/16-18 X 2.50" Stainless Steel Murrays Part# 19-2231 Stainless steel rudder bolt for all Hobie® Cats measures 5/16-18 x 2.50".  Used on Hobie Getaway Bow Spreader - Bow Tang Bolt. Rudder bolt for both the upper and lower rudder casting. Compare to Hobie Cat® Part# 8040341
    BOLT HEX HEAD 5/16-18 X 2.50" SS
    Misc
    Hobie Aussie Halyard Ring Murrays Part# 007-3064 If you're having trouble raising or lowering your mainsail due to a faulty halyard ring and shackle, this upgrade will help. Welded ring and lanyard give you more positive control while hooking or unhooking the ring to the hook. Use on any boat that uses a hook at the mast head and a ring and shackle at the head of the sail. Personal preference dictates whether you choose this ring or the Murrays Aussie Ring (#01-4216). Hobie® Part# 3064
    HOBIE AUSSIE HALYARD RING
    Hobie
    Harken Shackle Stamped 3/16" Murrays Part# 28-0072 Harken's stainless stamped D-shackle has 3/16" diameter pin. For Harken 2.25" blocks
    HARKEN SHACKLE STAMPED 3/16"
    Harken
    Ronstan Stainless Steel D Shackle, 1/4" Murrays Part# 21-0617 UDL BL - The “Uniformly Distributed Load” breaking load of the shackle; the load is applied across the full span of the shackle pin. PL BL - The “Point Load” breaking load of the shackle; the load is only applied at the center or one side of the shackle pin. Ronstan solid stainless steel shackle has 1/4" pin diameter. Having a spare on hand may mean the difference between sailing or not!
    RONSTAN 1/4" D SHACKLE
    Ronstan
    Screw 1/4-20 x 5/8 PHMS-P Stainless Steel Murrays Part# 50-8030331 This screw is used on the Hobie wave to secure the eye straps to the inner edge of the crossbars for connecting the tramp pulleys on the classic wave or "other" on the club version.
    SCREW 1/4-20 x 5/8" PHMS-P SS
    Hobie
    Titanium M6 T-Nut
    TITANIUM M6 T-NUT: HYDROFOIL MAST TRACK INSERTS
    Misc
    Sale
    Bow Shackle 1/4” with hole - Odd
    Misc
    Save $10
    Clevis Pin 1/4 X 1-1/8 Murrays Part# 22-9803 Stainless steel clevis pin measures 1/4" diameter x 1-1/8" grip length (shoulder to the split ring hole). Compare to Hobie Part 8020420 and 8020410
    CLEVIS PIN 1/4 X 1-1/8"
    Misc
    Harken 4mm Shallow Bow Shackle Murrays Part# 28-2131 Forged stainless steel shackles are polished to a high luster and are stamped with the screw pin diameter. Bow shackles are best for multidirectional loads. Shallow bow shackles are proportionally wider for their length than regular bow shackles.
    HARKEN 4MM SHALLOW BOW SHACKLE
    Harken
    Screw RHMS #12-24 X 1.25 Stainless Steel Murrays Part# 19-3520 Stainless steel, round head #12-24 x 1.25" machine screw is a replacement screw for Hobie® rudder gudgeon.
    SCREW RHMS #12-24 X 1.25 (SS)
    Misc
    Rivet Solid A 4-6 (1/8 X 3/8) Murrays Part# 19-5005 Solid aluminum 1/8" x 3/8" rivet is designed to be set with a hammer.
    RIVET SOLID A 4-6 (1/8x3/8")
    Misc
    Snap Shackle with Swivel Eye Murrays Part# 22-4521 2-3/4" long stainless steel snap shackle with swivel eye has 1/2" diameter eye. SWL 1000 lbs. Weighs 2.4 oz.
    SNAP SHACKLE WITH SWIVEL EYE
    Misc
    Recently viewed