Murrays.com Hobie shroud, forestay, halyard, mast bearing

Murrays

764 products

    Hobie, Nacra and Prindle rigging: shrouds, halyards, bridles, forestays and small parts like mast bearings, trapeze handles, rudder cam kits, rudder pins, righting lines and more.

     

    764 products
    H-18SX Shroud Roller Swaged 5/32" Black Wire Murrays Part# 002-0605-12 Single black shroud (sidestay) for Hobie® 18SX is hydraulically swaged for extra strength and a cleaner connection. Constructed to factory specifications. Compare to Hobie Cat® Part# 68793501
    H-18SX SHROUD 5/32" BLACK WIRE ROLLER SWAGED
    Murrays Sports
    H18SX Upper Forestay 5/32" Black Wire Murrays Part# 002-0635-02 Black upper forestay for Hobie® 18SX is constructed to factory specifications. Compare to Hobie Cat® Part# 68813501
    H-18SX UPPER FORESTAY 5/32" BLACK WIRE
    Murrays Sports
    H18SX Diamond Wire without Turnbuckle Murrays Part# 002-0694-20 Diamond wire for Hobie® 18SX is constructed with stainless fork, jib roller and left-hand threaded stud. Turnbuckle not included. Compare to Hobie Cat® Part# 68750001
    H-18SX DIAMOND WIRE WITHOUT TURNBUCKLE
    Murrays Sports
    H17 Sport Forestay 5/32" Murrays Part# 002-0345-32 Black forestay for Hobie® 17 Sport is constructed to factory specifications. Compare to Hobie Part# 52812001
    H-17 SPORT FORESTAY 5/32-BLACK WIRE
    Murrays Sports
    H14 Turbo Upper Forestay with Swivel Murrays Part# 002-0134-01 Upper forestay with swivel for Hobie® 14 Turbo is constructed to factory specifications. Turbo refers to the Hobie Factory Version that features a Hobie Roller furling drum, bridles connect to the drum with forks, and an under tramp jib block wire. Compare to Hobie Cat® #10810010
    H-14 TURBO UPPER FORESTAY WITH SWIVEL
    Murrays Sports
    H14 Turbo Jib Block Wire Murrays Part# 002-0124-80 Jib block wire for Hobie® 14 Turbo is constructed to factory specifications. Older under tramp version: requires grommets in the trampoline for jib blocks to connect to the Jib block wire thru the trampoline. And also requires a Hobie 14 shroud tang at the base of the shrouds to connect to. Turbo typically refers to the Hobie Factory Version that features a Hobie Roller furling drum, bridles connect to the drum with forks, and an under tram
    H-14 TURBO JIB BLOCK BLACK WIRE
    Murrays Sports
    Key-Ball Can't Hurt Connectors Murrays Part# 001-1213 This pair of connectors is designed for use with the carbon Key-Hole buckle #01-0311. Can't Hurt rings are a light and flexible alternative to "hard" stainless steel dogbones. Black high pressure nylon tubing covers 1/8" (1x19) stainless wire.
    KEY-BALL CAN'T HURT CONNECTOR
    Murrays Sports
    Nacra Inter 17 Forestay 1/8" Black Murrays Part# 002-5244-02 Because the manufacturer's specifications vary, a pull-to-pull length is required to ensure correct length for your boat.
    NACRA INTER 17 FORESTAY 1/8" BLACK WIRE
    Murrays Sports
    Hull Cradle: V Shaped Murrays Part# 13-7020
    HULL CRADLE: V SHAPED
    Murrays Sports
    Hi-Low Trapeze Adjustment Kit with Handle Murrays Part# 001-1140 Simple and adjustable on the fly, with constant upward tension on the trapeze ring and separate on-the-wire height adjustment. Easy to hook up and hike out with no initial adjustments. Very low stretch lines and Ronstan® turning blocks and aluminum Clamcleats® with roller fairleads for 2:1, easy-pull, easy-release height adjustment. Crew can move fore or aft while maintaining proper height. Constant, smooth-action tension on the trapeze ring
    HIGH-LOW TRAPEZE ADJUSTMENT KIT WITH HANDLE
    Murrays Sports
    N-6.0NA FORESTAY 5/32" BLACK WIRE
    Murrays Sports
    N5.8 Shroud 5/32" Black Wire Roller Swaged Murrays Part# 002-4505-12 Single black shroud for Nacra 5.8 is hydraulically swaged to be clean and strong. Constructed to factory specifications.
    N-5.8 SHROUD 5/32" BLACK WIRE ROLLER SWAGED
    Murrays Sports
    N-5.8 JIB HALYARD W/SHACKLE
    Murrays Sports
    N-5.7 BRIDLE 5/32 BLACK WIRE
    Murrays Sports
    N5.5SL, N5.7 Shroud 5/32" Black Wire Roller Swaged Murrays Part# 002-4305-12 Single black shroud for Nacra 5.5SL and 5.7 is hydraulically swaged to be clean and strong. Constructed to factory specifications.
    N-5.5SL/5.7 SHROUD 5/32" BLACK WIRE ROLLER SWAGED
    Murrays Sports
    N5.0 Shroud 5/32" Black Wire Roller Swaged Murrays Part# 002-4105-12 Single black shroud for Nacra 5.0 is constructed of 5/32" wire and is hydraulically swaged to be clean and strong. Constructed to factory specifications.
    N-5.0 SHROUD 5/32" BLACK WIRE ROLLER SWAGED
    Murrays Sports
    N5.0 Forestay 5/32" Black Wire Murrays Part# 002-4145-12 Black forestay for Nacra 5.0 is constructed to factory specifications.
    N-5.0 FORESTAY 5/32" BLACK WIRE
    Murrays Sports
    H14/16 Mast Bearing (Pack of 100) Murrays Part# 001-2042 Teflon® mast bearings for Hobie® 14 or 16 are .06" thick and will form to mast base with first use. Package of 100 mast chips.
    H14/16 MAST BEARING (100-PKG)
    Murrays Sports
    Out of Stock
    NACRA MAST STEP SYSTEM
    Murrays Sports
    Ring: 1/4 X 2 Diameter (Stainless Steel) Murrays Part# 25-3050 1/4" x 2" stainless ring can be used for Prindle-style jib halyards.
    RING: 1/4 X 2" DIAMETER (SS)
    Murrays Sports
    Out of Stock
    REPLACEMENT HOBIE WIND VANE Hobie part number CM7703
    REPLACEMENT HOBIE WIND VANE
    Murrays Sports
    Out of Stock
    POWER RIGHTING SYSTEM WITHOUT POLE
    Murrays Sports
    Prindle 19 Diamond Wire with Turnbuckle Murrays Part# 002-2494-20 Diamond wire with turnbuckle for Prindle 19 is constructed to factory specifications. Prindle part# 9879
    PRINDLE 19 DIAMOND WIRE WITH TURNBUCKLE
    Murrays Sports
    Out of Stock
    Prindle 18.2/19 Jib Block Wire 4-Way Murrays Part# 002-2424-20 Four-way jib block wire for Prindle 18-2 or 19 is constructed to factory specifications.
    PRINDLE 18.2/19 JIB BLOCK WIRE 4-WAY
    Murrays Sports
    TIGER LOW FORESTAY ROLLER FURLING 5/32- BLACK
    Murrays Sports
    Tiger Shroud 5/32" Roller Swaged Black Wire Murrays Part# 002-6005-12 Single black shroud for Hobie® Tiger is hydraulically swaged to be clean and strong. Constructed to factory specifications. Hobie® Part# 70792011
    TIGER SHROUD 5/32" ROLLER SWAGED BLACK WIRE
    Murrays Sports
    Spring 1/4" Stainless Steel Murrays.com Part# 001-0060 1/4" stainless steel spring as used in the Murrays Tiller Connection Kit (#01-2061) This spring fits on a 1/4 bolt. Specs: 1/2" Long x 3/8" OD
    Spring 1/4" Stainless Steel  Murrays Part# 001-0060 1/4" stainless steel spring as used in the Murrays Tiller Connection Kit (#01-2061)
    SPRING 1/4" (SS)
    Murrays Sports
    SAIL "HC" LOGO U-CUT PR BLACK
    Murrays Sports
    H17 Assembly Manual Murrays Part# 50-50450001 Printout of Hobie 17 assembly manual PDF.
    H-17 ASSEMBLY MANUAL
    Murrays Sports
    Prindle 18 trampoline
    PRINDLE 18 MESH TRAMPOLINE-BLACK
    Murrays Sports
    NACRA 5.2 1-PIECE 74" WIDE TRAMPOLINE-BLACK
    Murrays Sports
    Out of Stock
    NACRA MAST SUPPORT ROD W/NUTS & WSHR
    Murrays Sports
    H18 Illustrated Part List Murrays Part# 50-87166810 Hobie® factory publication aids in identifying parts for the Hobie® 18 and 18SX. The parts list is also available for free download at the Hobie Cat® Web site.
    H-18 ILLUSTRATED PARTS LIST
    Murrays Sports
    Murrays Hobie 18SX line package contains all the lines on a Hobie 18SX. The pack utilizes Robline Neptune 500 for the main and jib sheets and Pelican VLS, Very Low Stretch, for the control lines.  The Hobie 18 SX has wings that extend fore and aft of the front and rear crossbars and a taller mast, 29'7". Main Sheet Jib Sheet Daggerboard Handles Outhaul Downhaul Mast Rotation Main Halyard Trampoline Lacing Lines Trapeze Adjustment Line Batten Ties Roller Furline line Jib Halyard Jib L
    H-18SX LINE PACKAGE
    Murrays Sports
    Prindle Roller Furling Rig Kit Murrays Part# 30-5061 Furl your jib while beached to save your sail from flapping or for when flying a spinnaker. Prindle® kit includes: Harken® roller furling drum, upper forestay with Ronstan® swivel and 2" stainless steel ring, Harken® 279 cleat with eyestrap for front crossbar, fasteners and instructions. Please specify Prindle model.
    PRINDLE ROLLER FURLING RIG KIT
    Murrays Sports
    H18 Diamond Wire with Turnbuckle Murrays Part# 002-0494-40C​ Diamond wire for one side of a Hobie® 18 or 21SC is constructed with 1/8" 1x9 bare wire, stainless fork, jib roller and turnbuckles. Also used on the the Hobie 21SC is sometimes confused with the H21SE (Special Edition). Please note that the H21SC is differentiated by its 8.5' beam, front tramp and Hobie® 18 rigging.
    H18 Diamond Wire with Turnbuckle Murrays Part# 002-0494-40C​ Diamond wire for one side of a Hobie® 18 or 21SC is constructed with 1/8" 1x9 bare wire, stainless fork, jib roller and turnbuckles. Also used on the the Hobie 21SC is sometimes confused with the H21SE (Special Edition). Note: The H21SC is differentiated by its 8.5' beam, front tramp and Hobie® 18 rigging. Compare to Hobie Part# 61750001
    H-18 DIMOND WIRE WITH TURNBUCKLE
    Murrays Sports
    NACRA INFUSION 18 FORESTAY 5/32" BARE WIRE
    Murrays Sports
    Out of Stock
    N-15 MAST COVER
    Murrays Sports
    Sale
    H20 Rudder Bumper Murrays Part# 006-190807 The Rudder Bumper Hobie 20 is the wedge that mounts under the the lower casting on a Hobie 20 to prevent the rudders from turning too far into the hull and risking the tiller x-bar inverting. This also prevents stress on the hulls from the rudder casting slamming into it. This part mounts with a bolt and nut rather than a course thread screw like the original part.
    H-20 RUDDER BUMPER
    Murrays Sports
    Save $10
    Compare to Hobie part number 62000001 - Hobie 18 Main Battens
    Compare to Hobie part number 62000001 - Hobie 18 Main Battens
    H-18 MAIN FIBERGLASS BATTEN SET
    Murrays Sports
    Recently viewed