Murrays.com Hobie shroud, forestay, halyard, mast bearing

Murrays

764 products

    Hobie, Nacra and Prindle rigging: shrouds, halyards, bridles, forestays and small parts like mast bearings, trapeze handles, rudder cam kits, rudder pins, righting lines and more.

     

    764 products
    RUDDER HEAD ROLLER
    Murrays Sports
    Out of Stock
    Mystic Stealth Bar Slider Surf Rope Murrays part# 57-1637146 The Mystic Stealth Bar Slider Surf Rope is a replacement for the longer Dyneema line on a Mystic Stealth Surf Spreader Bar. Comes with a leash attachment ring and backing plate. Fits all sizes of Mystic Surf Spreader Bar.
    MYSTIC STEALTH BAR SLIDER SURF ROPE
    Murrays Sports
    Save $4.99
    Out of Stock
    H21 Super Cruiser Rudder Pin Murrays part# 50-30740001 H21/SC Hobie Rudder Pin for the Hobie 21 and the Hobie 21 Sport Cruiser. Hobie part# 30740001
    H-21SC RUDDER PIN
    Murrays Sports
    O’Pen Skiff Boat Cover
    O’Pen Skiff Boat Cover
    MURRAYS OPEN SKIFF BOAT OCVER
    Murrays Sports
    Wave Trapeze Wire BK (2) The basic trapeze assembly is constructed to factory specifications and includes two coated trapeze wires 3/32" (1x19) with nylon handles and a thimble at each end. Wires end just below handles. Order shock cord and adjustment kits separately. A trapeze adjustment kit (#01-1121 or 01-1140, purchased separately) may be added to wire with no installation charge! Check box when ordering and wire length will be adjusted accordingly.
    WAVE TRAPEZE BLACK WIRE (2)
    Murrays Sports
    NACRA F18 INF DIAMOND WIRE
    Murrays Sports
    Out of Stock
    104" Hobie batten part number 21000001
    H-16 MAINSAIL FIBERGLASS BATTEN 97.5"
    Murrays Sports
    Right Rudder Casting Murrays Part# 56-4005 ​Right rudder casting for all Prindles does not include hardware. Nacra Sailing factory item# 30413
    PRINDLE RIGHT RUDDER CASTING
    Murrays Sports
    P-18 DOUBLE TRAPEZE (4) Prindle part number 9823
    PRINDLE 18 DOUBLE TRAPEZE (4)
    Murrays Sports
    PRINDLE DYNEEMA RACE TRAMP LINE KIT
    Murrays Sports
    Ronstan Toggle Pin With Lanyard 1/4 X 1" Murrays Part# 21-1157L ​Stainless steel 1/4" diameter toggle pin replaces 1" clevis pin. Secure quick connect/disconnect clevis pin with a lanyard so you loose it.
    RONSTAN TOGGLE PIN WITH LANYARD 1/4X1"
    Murrays Sports
    Hawaiian Catamaran Righting System H17/18/Prindle Murrays Part# 001-4293 The Hawaiian Catamaran Righting System doubles as a preventer line. Big 1/2" braided righting line is suspended by shock cord under the trampoline. Lines terminate at the transom. Behind-the-back support allows lighter crews to combine weight or solo skippers to have a free hand for scooping up water (as with the Bucket Up Righting Aid) to add leverage. Racing class legal.
    H-17/18/PRINDLE HAWAIIAN CATAMERAN RIGHTING SYSTEM
    Murrays Sports
    Ronstan Toggle Pin With Lanyard 1/4x1.25" Murrays Part# 21-1159L ​Stainless steel 1/4" diameter toggle pin replaces 1.25" clevis pin. Secure quick connect/disconnect clevis pin with a lanyard so you loose it.
    RONSTAN TOGGLE PIN WITH LANYARD 1/4X1.25"
    Murrays Sports
    N-5.0 TRAPEZE WIRES (2)
    Murrays Sports
    NACRA INTER 20 DOUBLE TRAPEZE (4)
    Murrays Sports
    Prindle 19 Trapeze Wires - Prindle Part Number 9873
    PRINDLE 19 DOUBLE TRAPEZE (4)
    Murrays Sports
    Replacement up-loc pin for Hobie EZ LOC rudders. Add the plastic Hobie lanyard, or just use some batten tie line to secure it to the EZ LOC rudder housing. Used on both the Hobie Wave and Hobie Getaway. Compare to Hobie part 50314001
    Replacement up-loc pin for Hobie EZ LOC rudders. Add the plastic Hobie lanyard, or just use some batten tie line to secure it to the EZ LOC rudder housing. Used on both the Hobie Wave and Hobie Getaway. Compare to Hobie part 50314001
    EZ LOC UP-LOCK PIN
    Murrays Sports
    Out of Stock
    GETAWAY JIB SAIL (RED)
    Murrays Sports
    Prindle 16 Bridle 1/8" The Prindle 16 Bridle is a single 1/8" bridle wire for the Prindle 16 catamaran. Constructed to factory specifications. Available in White, Black or Bare wire. Prindle Part Number 9002 - Prindle wire rigging made by Murrays Marine
    DART-18 FORESTAY 1/8 BARE
    PRINDLE 16 BRIDLE 1/8" WIRE
    Murrays Sports
    HOBIE JIB CLEW BLOCK KIT
    Murrays Sports
    Out of Stock
    Carbon Key Hole Buckle Murrays Part# 001-0311 The safety-minded Carbon Key-Hole buckle system offers many advantages over the traditional hook design. Its low profile design is less likely to get hooked unintentionally and the system will stay hooked until purposefully removed. A low profile means much easier reboarding and less likelihood of scratching gel coat, point loading or damaging a hull. Ball-end trapeze rings are lighter and less dangerous than stainless dogbones or trapeze rings.
    CARBON KEY HOLE BUCKLE
    Murrays Sports
    Base Pad Universal U-drill  Murrays Part# 001-8014 This "potato chip" (2" OD) pad fits or can be modified to fit almost any main beam or mast extrusion for use with Harken micro cleats with fairleads or Ronstan small cleats with fairleads. To modify, put sandpaper on beam and rub base pad to suit and/or fill gap with silicone sealant and allow to dry before securing. Fasteners are not included.
    BASE PAD UNIVERSAL U-DRILL
    Murrays Sports
    3-Hole Adapter Pad Murrays Part# 001-0109 Our 3-hole adapter pad fits a Hobie® or Prindle elliptical crossbar. Polyurethane bases provide flat mounting surfaces for mast rotation control cleats, barberhauler cleats, or Hobie® 16 jib trim cleats. Use to mount small Ronstan C-Cleat (#21-5000) or Ronstan Small or Large Swivel 360 Cleats (#21-0067 or #21-0058). Each base can be port or starboard, depending on how cleats are installed.
    3-HOLE ADAPTER PAD
    Murrays Sports
    H18SX Bridle 5/32" Black Wire Murrays Part# 002-0615-22 Single black bridle for Hobie® 18SX is constructed of 5/32" wire to factory specifications. Compare to Hobie Cat® Part# 60822001 Black or 60820001 White
    H-18SX BRIDLE 5/32" BLACK WIRE
    Murrays Sports
    H17 Shroud 5/32 Roller Swedge Murrays Part# 002-0305-12 This is our strongest Shroud for the Hobie 17.  If you have a Hobie 17 Sport or Hobie 17 Super kit or other setup that has a jib on the front, you need these. Heavy duty 5/32" single black shroud (sidestay) for Hobie 17 or Hobie 17 Sport is hydraulically swaged with a thimble and marine eye for a cleaner, stronger shroud.
    H-17 SHROUD 5/32" WIRE ROLLER SWAGED
    Murrays Sports
    KEY-BALL CONNECTOR
    Murrays Sports
    Nacra Inter 17 Trapeze Black Wires (2 Handles) Murrays Part# 002-5253-02 The Nacra Inter F17 Trapeze Wires Black (2) basic assembly includes two coated trapeze wires 3/32" (1x19) with nylon handles and a thimble at each end. Wires end just below handles. Order shock cord and adjustment kits separately. A trapeze adjustment kit (#01-1121 or 01-1140, purchased separately) may be added to wire with no installation charge! Check box when ordering and wire length will be adjusted accordingly.
    NACRA INTER 17 TRAPEZE BLACK WIRES (2)
    Murrays Sports
    Inter 20 Roller Furling Forestay 5/32" Black Wire Murrays Part# 002-5445-32 Forestay for Inter 20 with roller furling jib is constructed of 5/32" black-coated wire to factory specifications.
    INTER 20 ROLLER FURLING FORESTAY 5/32" BLACK WIRE
    Murrays Sports
    Nacra Inter 20 Bridle 5/32" Black Wire Murrays Part# 002-5415-22 Single black bridle for Inter 20 is constructed to factory specifications. You must select the type of jib your boat has so that the bridle's length and fittings will be correct for your boat.
    NACRA INTER 20 BRIDLE 5/32" BLACK WIRE
    Murrays Sports
    Inter 20 Jib Halyard Wire Murrays Part# 002-5483-80 Jib halyard wire for Inter 20 is constructed to factory specifications.
    INTER 20 JIB HALYARD WIRE
    Murrays Sports
    Inter 18 Shroud 5/32" Black Wire Roller Swaged Murrays Part# 002-5305-12 Single black shroud for Inter 18 is hydraulically swaged to be clean and strong. Constructed to factory specifications.
    NACRA INTER 18 SHROUD 5/32" BLACK WIRE ROLLER SWAGED
    Murrays Sports
    Nacra Inter 18 Roller Furling Forestay 5/32" Black Wire Murrays Part# 002-5345-92 Forestay for Inter 18 is constructed to 5/32" black-coated wire to factory specifications.
    NACRA INTER 18 RF FORESTAY 5/32" BLACK WIRE
    Murrays Sports
    Nacra Inter 18 Bridle 5/32" Black Wire Murrays Part# 002-5315-22 Single black bridle for Inter 18 is constructed of black-coated, 5/32" 1x19 wire to factory specifications.
    NACRA INTER 18 BRIDLE 5/32"BLACK WIRE
    Murrays Sports
    H21 Special Edition Diamond Wire without Turnbuckle Murrays Part# 002-0595-20 Diamond wire without turnbuckle for Hobie® 21SE (Special Edition) is constructed to factory specifications. The H21SE is sometimes confused with the H21SC (Sport Cruiser). Please note that the H21SE is differentiated by its 10' beam and lack of a front tramp.
    H-21SE DIAMOND WIRE WITHOUT TURNBUCKLE
    Murrays Sports
    N6.0 North American Shroud 5/32" Black Wire Roller Swaged Murrays Part# 002-4705-12 Single black shroud for Nacra 6.0NA (North American) is hydraulically swaged to be clean and strong. Constructed to factory specifications. Length: 24' 4" pull-to-pull. To help differentiate between the standard Nacra 6.0 and Nacra 6.0 NA, please note that the standard Nacra 6.0 came stock with a shorter mast and without a bridle foil. The Nacra 6.0 NA came stock with a longer mast and included a bridle foil.
    N-6.0NA SHROUD 5/32" BLACK WIRE ROLLER SWAGED
    Murrays Sports
    N-6.0NA DIAMOND WIRE SHORT
    Murrays Sports
    N-5.0 JIB HALYARD W/SHACKLE
    Murrays Sports
    N6.0 North American Diamond Wire Long Murrays Part# 002-4794-20 Lower diamond wire with turnbuckle and roller for Nacra 6.0 NA (North American) is constructed to factory specifications.
    N-6.0NA DIAMOND WIRE LONG
    Murrays Sports
    N6.0 Shroud 5/32" Black Wire Roller Swaged Murrays Part# 002-4605-12 Single black shroud for Nacra 6.0 is hydraulically swaged to be clean and strong. Constructed to factory specifications. Length: 22' 5-1/4" pull-to-pull. To help differentiate between the standard Nacra 6.0 and Nacra 6.0 NA (North American), please note that the standard Nacra 6.0 came stock with a shorter mast and without a bridle foil. The Nacra 6.0 NA came stock with a longer mast and had a bridle foil.
    N-6.0 SHROUD 5/32" BLACK WIRE ROLLER SWAGED
    Murrays Sports
    N5.7 Diamond Wire with Turnbuckle Murrays Part# 002-4494-20 Diamond wire with turnbuckle for Nacra 5.7 is constructed to factory specifications.
    N-5.7 DIAMOND WIRE WITH TURNBUCKLE
    Murrays Sports
    Recently viewed