Murrays.com Hobie shroud, forestay, halyard, mast bearing

Murrays

797 products

Hobie, Nacra and Prindle rigging: shrouds, halyards, bridles, forestays and small parts like mast bearings, trapeze handles, rudder cam kits, rudder pins, righting lines and more.

797 products

Sort

H14 Turbo Jib Block Wire

Murrays Part# 002-0124-80

Jib block wire for Hobie® 14 Turbo is constructed to factory specifications.

Older under tramp version: requires grommets in the trampoline for jib blocks to connect to the Jib block wire thru the trampoline. And also requires a Hobie 14 shroud tang at the base of the shrouds to connect to.

Turbo typically refers to the Hobie Factory Version that features a Hobie Roller furling drum, bridles connect to the drum with forks, and an under tram

H-14 TURBO JIB BLOCK BLACK WIRE

Key-Ball Can't Hurt Connectors

Murrays Part# 001-1213

This pair of connectors is designed for use with the carbon Key-Hole buckle #01-0311. Can't Hurt rings are a light and flexible alternative to "hard" stainless steel dogbones. Black high pressure nylon tubing covers 1/8" (1x19) stainless wire.

KEY-BALL CAN'T HURT CONNECTOR

Nacra Inter 17 Trapeze Black Wires
(2 Handles)

Murrays Part# 002-5253-02

The Nacra Inter F17 Trapeze Wires Black (2) basic assembly includes two coated trapeze wires 3/32" (1x19) with nylon handles and a thimble at each end. Wires end just below handles. Order shock cord and adjustment kits separately.

A trapeze adjustment kit (#01-1121 or 01-1140, purchased separately) may be added to wire with no installation charge! Check box when ordering and wire length will be adjusted accordingly.

NACRA INTER 17 TRAPEZE BLACK WIRES (2)

Nacra Inter 17 Forestay 1/8" Black
Murrays Part# 002-5244-02
Because the manufacturer's specifications vary, a pull-to-pull length is required to ensure correct length for your boat.

NACRA INTER 17 FORESTAY 1/8" BLACK WIRE

Inter 18 Shroud 5/32" Black Wire Roller Swaged

Murrays Part# 002-5305-12

Single black shroud for Inter 18 is hydraulically swaged to be clean and strong. Constructed to factory specifications.

NACRA INTER 18 SHROUD 5/32" BLACK WIRE ROLLER SWAGED

Nacra Inter 18 Roller Furling Forestay 5/32" Black Wire

Murrays Part# 002-5345-92

Forestay for Inter 18 is constructed to 5/32" black-coated wire to factory specifications.

NACRA INTER 18 RF FORESTAY 5/32" BLACK WIRE

H21SE Forestay 5/32" Wire

Murrays Part# 002-0545-32

Forestay for Hobie® 21SE (Special Edition) is constructed to factory specifications.

The H21SE is sometimes confused with the H21SC (Sport Cruiser). Please note that the H21SE is differentiated by its 10' beam and lack of a front tramp.

H-21SE FORESTAY 5/32" BLACK WIRE

H21 Special Edition Diamond Wire without Turnbuckle

Murrays Part# 002-0595-20

Diamond wire without turnbuckle for Hobie® 21SE (Special Edition) is constructed to factory specifications.

The H21SE is sometimes confused with the H21SC (Sport Cruiser). Please note that the H21SE is differentiated by its 10' beam and lack of a front tramp.

H-21SE DIAMOND WIRE WITHOUT TURNBUCKLE

N-5.2 JIB HALYARD WITH SHACKLE

N-6.0NA FORESTAY 5/32" BLACK WIRE

N-5.0 JIB HALYARD W/SHACKLE

N-5.7 MAIN HALYARD W/SHACKLE

N-5.7 BRIDLE 5/32 BLACK WIRE

N5.5SL, N5.7 Shroud 5/32" Black Wire Roller Swaged

Murrays Part# 002-4305-12

Single black shroud for Nacra 5.5SL and 5.7 is hydraulically swaged to be clean and strong. Constructed to factory specifications.

N-5.5SL/5.7 SHROUD 5/32" BLACK WIRE ROLLER SWAGED

N5.0 Shroud 5/32" Black Wire Roller Swaged

Murrays Part# 002-4105-12

Single black shroud for Nacra 5.0 is constructed of 5/32" wire and is hydraulically swaged to be clean and strong. Constructed to factory specifications.

N-5.0 SHROUD 5/32" BLACK WIRE ROLLER SWAGED

N5.0 Forestay 5/32" Black Wire

Murrays Part# 002-4145-12

Black forestay for Nacra 5.0 is constructed to factory specifications.

N-5.0 FORESTAY 5/32" BLACK WIRE

N-5.0 BRIDLE 5/32- BLACK

N5.0 Diamond Wire with Turnbuckle

Murrays Part# 002-4194-20

Diamond wire with turnbuckle for Nacra 5.0 is constructed to factory specifications.

N-5.0 DIAMOND WIRE WITH TURNBUCKLE

Lido 14 Shroud 3/32" White Wire

Murrays Part# 002-5103-91

Single white shroud for Lido 14 is constructed to factory length.

LIDO 14 SHROUD 3/32" WHITE WIRE

POWER RIGHTING SYSTEM WITHOUT POLE

Plug for Aluminum Stick

Murrays Part# 001-0064

15/16"Outer Dimension plug fits the Murrays Aluminum Hiking Stick.

PLUG FOR ALUMINUM STICK

Prindle 18.2/19 Jib Block Wire 4-Way

Murrays Part# 002-2424-20

Four-way jib block wire for Prindle 18-2 or 19 is constructed to factory specifications.

PRINDLE 18.2/19 JIB BLOCK WIRE 4-WAY

PRINDLE 18 UPPER FORESTAY 5/32 BARE

P18 Bridle 5/32" Black
Murrays Part# 002-2315-02
One black bridle for Prindle 18 is constructed to factory specifications.

PRINDLE 18 BRIDLE 5/32" BLACK WIRE

TIGER LOW FORESTAY ROLLER FURLING 5/32- BLACK

Tiger Shroud 5/32" Roller Swaged Black Wire

Murrays Part# 002-6005-12

Single black shroud for Hobie® Tiger is hydraulically swaged to be clean and strong. Constructed to factory specifications.
Hobie® Part# 70792011

TIGER SHROUD 5/32" ROLLER SWAGED BLACK WIRE

Spring 1/4" Stainless Steel

Murrays.com Part# 001-0060

1/4" stainless steel spring as used in the Murrays Tiller Connection Kit (#01-2061)

This spring fits on a 1/4 bolt.

Specs: 1/2" Long x 3/8" OD

Spring 1/4" Stainless Steel 

Murrays Part# 001-0060

1/4" stainless steel spring as used in the Murrays Tiller Connection Kit (#01-2061)

SPRING 1/4" (SS)

Prindle 18 trampoline

PRINDLE 18 MESH TRAMPOLINE-BLACK

NACRA 5.2 1-PIECE 74" WIDE TRAMPOLINE-BLACK

H18SX/21sc WING TRAMPOLINES
Murrays Hobie 18SX and 21SC Wing Trampolines. Lace on. Sold as a pair.
Compare to Hobie part number 68040255
Not compatible with the Hobie 18 Magnum.

H18SX/21sc WING TRAMPOLINES

Murrays Hobie 18SX and 21SC Wing Trampolines.  Lace on.  Sold as a pair.  

Compare to Hobie part number 68040255

Not compatible with the Hobie 18 Magnum.

H18SX/21SC WING TRAMPOLINES-BLACK

Hobie Getaway Forward Trampoline - 2000-2002 - 3/8 BOLT ROPE Compare to Hobie part number 37980055

Hobie getaway forward Trampoline track Compare to Hobie part number37980055

GETAWAY FORWARD TRAMPOLINE 2000-02

NACRA MAST SUPPORT ROD W/NUTS & WSHR

NACRA DOLPHIN MAST SUPPORT ROD

H18 Illustrated Part List

Murrays Part# 50-87166810

Hobie® factory publication aids in identifying parts for the Hobie® 18 and 18SX.

The parts list is also available for free download at the Hobie Cat® Web site.

H-18 ILLUSTRATED PARTS LIST

NACRA INFUSION 18 FORESTAY 5/32" BARE WIRE

NF18 Shroud 5/32" Black Wire

Murrays Part# 002-5605-12

N-F18 SHROUD 5/32" BLACK WIRE

TIGER TRAMPOLINE WITH CURVED SIDES-BLACK

N-15 MAST COVER

US Sabot Line Package SBSS

Murrays Part# 001-39US

Includes the following lines:

Painter

Mainsheet

Outhaul

Traveler

Cunningham

3 vang lines

Dagger hold down

US Sabot Line Package SBSS

Murrays Part# 001-39US

Includes the following lines:

Painter

Mainsheet

Outhaul

Traveler

Cunningham

3 vang lines

Dagger hold down

US SABOT LINE PACKAGE SBSS

N5.8 North American Forestay 5/32" Black Wire

Murrays Part# 002-4545-12NA

The Nacra 5.8 forestay is constructed to factory specifications from 5/32" black-coated wire.

Their are 2 versions of the Nacra 5.8.  The standard 5.8 which is mostly found in Europe and N.A. which is the North American version

N-5.8NA FORESTAY 5/32" BLACK WIRE

Previous 1 … 9 10 11 12 13 … 20 Next

Recently viewed

Murrays