Murrays.com Hobie shroud, forestay, halyard, mast bearing

Murrays

797 products

Hobie, Nacra and Prindle rigging: shrouds, halyards, bridles, forestays and small parts like mast bearings, trapeze handles, rudder cam kits, rudder pins, righting lines and more.

797 products

Sort

CHEATA BLOCK SET SCREW

Tiller Crossbar Adjustable Cap Kit

Murrays Part# 50-6040000M

Murrays Tiller Crossbar connection kit is a complete kit to connect the Hobie tiller cross bar and tiller arms. This is modeled after the original design but with some upgrades. We use 2 adjustable end caps to extend the overall adjustment length. Allows users shorten their tiller crossbar due to corrosion. 2 adjustable caps also allows users to adjust the crossbar length from either end of the bar. The tiller crossbar

TILLER CROSSBAR ADJUSTABLE CAP KIT

PRINDLE DYNEEMA RACE TRAMP LINE KIT

Prindle 16 Line Package
Murrays Part 001-39P16
replaces all the lines on a Prindle 16 sailboat.
Line Package Includes:
Mainsheet 3/8" 40'
Traveler Control 5/16"
Jib Sheet 5/16" 33'
Barber Hauler 1/4" 16'
Trapeze Adjustment Line 1/4" 14' cut into 4x 3.5' pieces
Main Halyard 3/16" 52'
MURRAYS PRINDLE Jib halyard Kit
Outhaul 3/16" 8'
Downhaul 1/4" 15'
Righting Line 1/2" 16'
Murrays Rudder Pull UP/ Pull Down kit
Mast Rotator Line 3/16" 5'
Murrays Trapeze Bungee kit
Jib Jam

PRINDLE 16 LINE PACKAGE

EYE STRAP KIT - 2072

WAVE TRAMPOLINE LACING KIT

Jib track 5/8” used

N5.8 Shroud 5/32" Black Wire Roller Swaged

Murrays Part# 002-4505-12

Single black shroud for Nacra 5.8 is hydraulically swaged to be clean and strong. Constructed to factory specifications.

N-5.8 SHROUD 5/32" BLACK WIRE ROLLER SWAGED

Prindle 19 Forestay 5/32" Black Wire with Turnbuckle

Murrays Part# 002-2445-42

Forestay with turnbuckle for Prindle 19 is constructed to factory specifications.

PRINDLE 19 FORESTAY 5/32"BLACK WIRE WITH TURNBUCKLE

The Murrays Prindle Trapeze Wires are a set of 2 black or white coated trap wires with 2 handles for trapezing. Order shock cord, harness loops and adjustment kits separately.

H17 Trapeze Wires (2)

The H17 Trapeze Wires (2) basic trapeze assembly includes two coated trapeze wires 3/32" (1x19) with nylon handles and a thimble at each end. Wires end just below handles.

Order with a trapeze adjustment kit (#01-1121 or 01-1140, purchased separately) and it will be added to wire with no installation charge.

Compare to Hobie part number 1471B.

Order shock cord, Can't miss rings/dog bones and adjustment kits separately.

Murrays PN 002-0353-01

002-0353-02

PRINDLE 16 TRAPEZE WIRES (2)

SISTER CLIP MICRO (EA)

Yoke Stamping Only Stainless Steel
Murrays Part# 001-0063
Replacement yoke stamping for #01-0062 hiking stick yoke assembly. Compare to Hobie Cat® #3205.

YOKE STAMPING ONLY (SS)

Windsurf Adjustable Outhaul Kit

Murrays Part# 001-9520

Racers and recreational windsurf sailors can adjust outhaul tension "on the fly" for maximum power or speed:

Low gear: Loosen outhaul tension to "power-up" to get going, even in light wind.
Shift to drive: Tighten outhaul to flatten sail for more speed as you get onto a plane and/or more efficiency when heading upwind.
Adjust the outhaul (sail shape) from either side, at any time.

WINDSURF ADJUSTABLE OUTHAUL KIT

Murrays Hobie 18SX line package contains all the lines on a Hobie 18SX. The pack utilizes Robline Neptune 500 for the main and jib sheets and Pelican VLS, Very Low Stretch, for the control lines.  The Hobie 18 SX has wings that extend fore and aft of the front and rear crossbars and a taller mast, 29'7".

Main Sheet

Jib Sheet

Daggerboard Handles

Outhaul

Downhaul

Mast Rotation

Main Halyard

Trampoline Lacing Lines

Trapeze Adjustment Line

Batten Ties

Roller Furline line

Jib Halyard

Jib L

H-18SX LINE PACKAGE

HOBIE 18 CHANNEL RETAINING PLATE

HOBIE PART NUMBER 61110000

H-18 CHANNEL RETAINING PLATE

Rivet Washer Nylon
Commonly used on NACRA catamarans to insulate the stainless rivet from aluminum extrusions.
Nacra PN 40200

RIVET WASHER NYLON

CHEATA ALUMINUM BLOCK

SUNFISH SPARES AND SAIL BAG-POLY BLUE

104" Hobie batten part number 21000001

H-16 MAINSAIL FIBERGLASS BATTEN 41"

104" Hobie batten part number 21000001

H-16 MAINSAIL FIBERGLASS BATTEN 104"

P-18 DOUBLE TRAPEZE (4) Prindle part number 9823

PRINDLE 18 DOUBLE TRAPEZE (4)

Snuffer Sock Mid Pole

Murrays Part# 56-9711

A snuffer funnels the spinnaker into the sock to facilitate launching and retrieval, even while sailing a triangular course. Keeps the tramp clean. This snuffer sock holds sail when not in use. Made with lightweight waterproof sail material a neoprene patch under the opening for added stretch and abrasion resistance.

SNUFFER SOCK MID POLE

H17 Trapeze Wires (2)

The H17 Trapeze Wires (2) basic trapeze assembly includes two coated trapeze wires 3/32" (1x19) with nylon handles and a thimble at each end. Wires end just below handles.

Order with a trapeze adjustment kit (#01-1121 or 01-1140, purchased separately) and it will be added to wire with no installation charge.

Compare to Hobie part number 1471B.

Order shock cord, Can't miss rings/dog bones and adjustment kits separately.

Murrays PN 002-0353-01

002-0353-02

H-17 TRAPEZE WIRES (2)

The Surefoot EVA Deck Grip Kit is back, now with 3m peel and stick backing on diamond-textured EVA foam. Ideal rail and or deck grip on all dinghies and catamarans. EVA traction pads offer grip, padding and a long life span. EVA is a lightweight foam doesn’t absorb water the way carpet does, so there is minimal weight when it gets wet!

Universal Catamaran Kit: Six 3" x 40" peel and stick foam grip strips - will work on virtually any Prindle, Nacra, or any other boat class for railing traction.

UNIVERSAL SUREFOOT EVA KIT

WAVE LINE PACKAGE

H17 Forestay 1/8" The H17 Forestay 1/8" for Hobie® 17 is constructed to factory specifications. Choose from White or Black wire coating. Compare to Hobie Cat® #50701201.

H-17 FORESTAY 1/8" WIRE

H-17 Shroud 1/8″

The H17 Shroud 1/8″ is a single shroud for Hobie® 17 constructed with 1/8″ wire to factory specifications. Each. Choose from White or Black wire coating. Purchase two to ensure equal lengths.

Use this page to order product numbers:

002-0304-01 White with thimble/thimble fittings (compare to Hobie Part Number 20790011)
002-0304-02 Black with thimble/thimble fittings (compare to Hobie Part Number 20792011)

H-17 SHROUD 1/8" WIRE

Impact Bucket Hat - Bump Cap

The Surf - Foil Impact Bucket Hat is a bucket hat with a lightweight plastic and foam liner that makes it able to take light to medium impacts. Watersports specific design is great for Surfing, Kitesurfing, Foiling, Sailing, SUP, Kayak, and Windsurfing.

- 360 degree brim with a stiff section in the front to protect your face and eyes from the sun.

- Removable neck flap for additional sun protection

- Chin strap for secure fit

- Padded liner for impact resistance

Impact Bucket Hat - Bump Cap

The Surf - Foil Impact Bucket Hat is a bucket hat with a lightweight plastic and foam liner that makes it able to take light to medium impacts. Watersports specific design is great for Surfing, Kitesurfing, Foiling, Sailing, SUP, Kayak, and Windsurfing.

- 360 degree brim with a stiff section in the front to protect your face and eyes from the sun.

- Removable neck flap for additional sun protection

- Chin strap for secure fit

- Padded liner for impact resistance

Impact Bucket Hat - Bump Cap

Sail Ring Pack (30)

HOBIE TIGER RUDDER CAM

Replacement rudder cam for a Hobie Tiger

Hobie part number F14061180

HOBIE TIGER RUDDER CAM

WETA FORESTAY 3/32 BARE

WETA SHROUD 3/32" BLACK

Wing Mount Bar 2 x 1/2"

Murrays Part# 19-0020

5/16-18" Hole

WING MOUNT BAR 2.5 x 1/2"

Dolphin Striker Eye Bolt H14
Murrays PN 001-0106
This part is used as part of the Murrays H14 Dolphin Striker Kit.
Replacement stainless steel post for #01-2083 dolphin striker for Hobie® 14.
19-2524 nylock nut is needed and not included with this part.

H-14 DOLPHIN STRIKER EYE BOLT

Big Cat Catamaran Righting System

Murrays Part# 001-8293

The Big Cat Righting System features the extra line needed to bring bigger cats up from turtle position while keeping the deck clear for better footing. The extra length of 1/2" hollow braided line is quickly accessed by unhooking either or both ends of line with carbine hooks. Extra line is neatly suspended just aft of front crossbar and is held in place with shock cord. Blue water tested and proven! The Big Cat Righting System fits Hobie® 20/21, P

BIG CAT RIGHTING SYSTEM

H20 Diamond Wire Double without Turnbuckle

Murrays Part# 002-0795-20

Diamond wire double (includes both sides) for Hobie® 20 is constructed to factory specifications. Without turnbuckle.

Compare to Hobie Cat® Part# 41750001

H-20 DIAMOND WIRE DOUBLE WITHOUT TURNBUCKLE

Key-Ball Can't Miss Connector 

Murrays Part# 001-0142

Can't Miss handles are designed to allow the sailor to hook-up without even looking at the trapeze hook. This lightweight, extra-wide hook-up ring has a center-hold handle with molded finger ridges. Double swaged 1/8" (1x19) wire is color-coated with high pressure nylon tubing. Use this pair of connectors with Carbon Key-Hole Buckle (#01-0311), sold separately.

KEY-BALL CAN'T MISS CONNECTOR

Inter 20 Diamond Wire without Turnbuckle

Murrays Part# 002-5494-20

Diamond wire without turnbuckle for Inter 20 is constructed to factory specifications. Includes both sides.

NACRA INTER 20 DIAMOND WIRE WITHOUT TURNBUCKLE

Hi-Low Trapeze Adjustment Kit with Handle

Murrays Part# 001-1140

Simple and adjustable on the fly, with constant upward tension on the trapeze ring and separate on-the-wire height adjustment. Easy to hook up and hike out with no initial adjustments. Very low stretch lines and Ronstan® turning blocks and aluminum Clamcleats® with roller fairleads for 2:1, easy-pull, easy-release height adjustment. Crew can move fore or aft while maintaining proper height. Constant, smooth-action tension on the trapeze ring

HIGH-LOW TRAPEZE ADJUSTMENT KIT WITH HANDLE

N-5.0 MAIN HALYARD WITH SHACKLE

Previous 1 … 6 7 8 9 10 … 20 Next

Recently viewed

Murrays