Murrays.com Hobie shroud, forestay, halyard, mast bearing

Murrays

748 products

    Hobie, Nacra and Prindle rigging: shrouds, halyards, bridles, forestays and small parts like mast bearings, trapeze handles, rudder cam kits, rudder pins, righting lines and more.

     

    748 products
    POWERSTICK TELESCOPING CARBON TILLER 62-115" - YOKE STYLE
    Murrays Sports
    Tramp Line Kit: H14/16/18 Murrays Part# 001-2242 Tramp Line Kit: Hobie 14, Hobie 16, Hobie 18: low stretch line offers a longer-lasting option over shock cord and is the better choice for sailors who prefer a very tight tramp. As the line stretches slightly over time, sailors can re-tension the tramp lacing to their liking. The kit contains three lengths of 3/16" 8-strand black low-stretch line (one piece 33', two pieces 15') and lacing instructions. This kit will lace all factory and most aftermarket t
    H-14/16/18 LOW STRETCH TRAMP LINE KIT
    Murrays Sports
    This Hobie 16 Rigging set is a set of rigging for a Hobie 16 that was standard in 1995. This is a perfect upgrade your 70s, 80s, early 90’s boat to make it more modern.
    H-16 RIGGING KIT: 1995 SPEC BLACK RIGGING
    Murrays Sports
    The Murrays main halyard for Hobie Wave is constructed with 1/4" polyester yacht braid line and 316 stainless wire finished with a halyard shackle with a captured pin, Built to factory specifications. A main halyard is used to raise the main sail. Compare to Hobie part number 38651001. 
    WAVE MAIN HALYARD
    Murrays Sports
    Rudder Locking Kit Hobie 17, 18, 20, 21 Murrays Part# 001-3552 The Rudder Locking Kit Hobie 17, 18, 20, 21 includes the rudder spring, rudder casting screw, and the rudder plunger for the Hobie 17, 18, 20 and 21. Delrin screw is 3/4-10 thread. In many cases you can drill it out with a 5/8" drill bit and then get a 3/4-10 tap to clear the threads.
    H-17/18/20 and 21 RUDDER LOCKING KIT
    Murrays Sports
    Sale
    ​​Murrays Rudder Covers for Hobies The Murrays rudder covers are constructed of durable, UV stable, padded material to protect your rudders from dings, nicks and grime. The red color helps with visibility when trailering. Straps with sturdy buckles keep the covers firmly in place, even when travailing. The Murrays Rudder covers have strong UV resistance and have 2-3 times the lifespan of a Hobie rudder cover. Unit: Pair Made in the U.S.A. Compatibility: Fits all Hobie rudders except the H21SE (Special
    ​​Murrays Rudder Covers for Hobies The Murrays rudder covers are constructed of durable, UV stable, padded material to protect your rudders from dings, nicks and grime. The red color helps with visibility when trailering. Straps with sturdy buckles keep the covers firmly in place, even when travailing. The Murrays Rudder covers have strong UV resistance and have 2-3 times the lifespan of a Hobie rudder cover. Unit: Pair Made in the U.S.A. Compatibility: Fits all Hobie rudders except the H21SE (Special
    MURRAYS HOBIE RUDDER COVER
    Murrays Sports
    Save $24
    Cat Shackle Tool Murrays Part# 001-0006 This stamped stainless steel tool is a screwdriver, bottle opener, shackle tool and 3/8" and 5/16" wrench. The shackle key also aids in getting pins out of shackles and loosening drain plugs. Compare to Hobie Cat® Part# 83101
    CAT SHACKLE TOOL
    Murrays Sports
    Mast Step Hinge Murrays Part# 56-6815 Designed and built to meet or exceed original OEM.  ​Mast step hinge for all Prindles. Use two #56-F128 mast step hinge pins. Nacra Sailing factory item# 30455
    PRINDLE MAST STEP HINGE
    Murrays Sports
    STRETCH RIGHTING H14/16/17/18 Murrays Part# 001-3294 The Murrays Stretch Righting Kit is our most popular righting line kit for catamarans such as Hobie® 14, 16, 17, 18 and 18SX. If the bow starts to bury, the line is readily available to both skipper and crew who can anchor themselves to keep from being catapulted forward. This beautifully simple system features easy-to-grip, 1/2" hollow braid line with internal shock cord that stretches for righting or trapezing and then recoils automatically
    H-14/16/17/18 STRETCH RIGHTING
    Murrays Sports
    84" Murrays Fiberglass Tiller Extension Murrays Part# 001-1320 The 84" Murrays Fiberglass Tiller Extension is a lighter version of the Hobie fiberglass tiller extension. It was developed by an A Fleet Racer looking for a lighter more economic alternative. Murrays helped get them into production and here they are! Features: 5/8" diameter black fiberglass tube Hobie yoke base, same as the Hobie version 16" grip on the top 84" fixed length Weight: 3/4 lb.
    MURRAYS 84" FIBERGLASS TILLER EXTENSION
    Murrays Sports
    EZ-UP TRAP KIT: HARKEN - similar to Hobie part number 3102
    EZ-UP TRAPEZE KIT
    Murrays Sports
    Hobie Wave rigging kit, 2 shrouds, 2 bridles and a forestay
    HOBIE WAVE RIGGING KIT
    Murrays Sports
    Hobie 6 BRIDLE WIRE The H-16 Bridle Wire is one bridle for Hobie 16 constructed of 316 stainless steel wire to factory specifications. We recommend purchasing two bridles in order to ensure equal length and strength of your bridle wires. Wire lengths changed over the years, please select the appropriate bridle wires for your boat. We recommend Black coated for the longest lifespan.
    H-14 Bridle 1/8" Single bridle for Hobie 14 constructed of 1/8" 1x19 wire to factory specifications.  This is for Hobie 14s without jibs. Use this page to order product numbers: 02-0114-01 White 02-0114-02 Black Compare to Hobie Cat® #10822101
    H-16 BRIDLE WIRE
    Murrays Sports
    Mast Cleat Murrays Part# 011-6481 The Mast Cleat is a can be used as a downhaul / halyard cleat on a Hobie 14 and or 16. Compare to Hobie Cat® factory item #10730000. 31mm Center to Center.
    MAST CLEAT
    Murrays Sports
    Rudder Pins H17/18 Stainless Steel Murrays Part# 001-4273 Weight-saving compared to solid stainless steel pins, hollow stainless rudder pins with still beefy .065″ wall provide reduced wear and the good long-term durability. The universal stainless steel 3/8″ x 9-1/4″ rudder pins are suited for; Hobie 17/18/20 rudder castings. Also used on older Hobie Wave and Getaways with metal rudder castings. Cotter pins are included. Alternative to Hobie Cat® #60880011.  (* Pre EZ LOC Rudder c
    H-17/18 RUDDER PINS PR (SS)
    Murrays Sports
    ARRIBA CORK BALL GRIP KIT Murrays Part# 44-0002 The Cork Ball Grip Kit replaces the stock Arriba, Murrays Aluminum Tiller and Hot Stick end grips. The ball is predrilled, lightweight and makes the hiking stick easier to hold. The inside diameter is 1-1/8". Epoxy adhesive is included. Hobie Cat® item #FXGRIP. Order epoxy (#00-0002-1) to "caramel-coat" the cork ball handle to make it last longer
    Powerstick Cork Ball Grip Kit
    ARRIBA CORK BALL GRIP KIT
    Murrays Sports
    7"X17" Zip Pouch-Assorted Colors Murrays Part# 31-1402 The Murrays Zip Pouch 7"X17" is constructed of rugged, water-resistant material with plastic hooks at each end to attach to the center or aft tramp lacing. The pouch provides handy storage for replacement parts, keys, and safety gear. Assorted colors. We have this pouch made for us right here in the U.S.A. Compare to Hobie Cat® stow bag #72000B and 72005B
    7"X17" ZIP POUCH-ASSORTED COLORS
    Murrays Sports
    Murrays Tell Tails Pack of 16 Murrays PN 001-3825 Black ripstop nylon tell-tales attach to the sail with adhesive patches to visually aid in trimming the sail.  Compatible with both the main and jib sails. Set includes: 6 x pairs of Black tell tails 4 x Black Leech tell tails
    MURRAYS TELL TAIL SET
    Murrays Sports
    Murrays Part# 001-7050 The gold standard for catamaran racing has been the Coffee Marine Bridle Fly or the Hobie STD bridle vane that was designed based on it. The red plastic vane is very sensitive to wind shifts and easily mounts to the front of a Hobie 16, 14, Wave and all the Prindle Catamarans. With an adapter it can be mounted to any of the Hobiecat sailboats that use a furling drum. To start out, we are offering the standard length which extends about 13" and Hobie part number 7703
    COFFEE MARINE BRIDLE VANE
    Murrays Sports
    The Hobie 16 Line Package replaces all the lines on a Hobie 16! All lines are pre-cut to the correct length with a hot knife to prevent fraying or unravelling.
    The Hobie 16 Line Package replaces all the lines on a Hobie 16! All lines are pre-cut to the correct length with a hot knife to prevent fraying or unravelling.
    H-16 LINE PACKAGE
    Murrays Sports
    The Hobie 18 Trapeze Shock Cord is an absolute necessity because it keeps the trapeze system in place and ready for hook-up. On this kit for Hobie® 18, one hook connects to either the thimble on the trapeze wire or the adjustment line, then runs through the hull fairlead and through the eyestrap under the lip of the hull near the bow or stern for crew and skipper trapeze lines respectively. The 3/16" shock cord stretches more and slides through ferrules better than larger diameter shock cord. Includes four
    H-18 TRAP SHOCK CORD (4)
    Murrays Sports
    Hobie 18 shroud - side stay - Hobie part number 6079001 white and 60792001 black
    H-18/21 SC SHROUD 5/32" ROLLER SWAGED
    Murrays Sports
    Out of Stock
    Mast Hinge H-16 (Only) Murrays Part# 25-3360 Heavy duty mast base hinge for Hobie® 16 only (does not fit Hobie 14). Clevis pins are sold separately. NOTE: This kit does not fit the newer style Hobie 16s, does not work on post 1993 Hobie 16s with the extreme mast rake, or on older boats with an updated mast step. The way to tell is if your mast step has a horizontal mast base then it is old style, new style has a slant toward the stern.
    H-16 (ONLY) MAST HINGE
    Murrays Sports
    Out of Stock
    Murrays Race Half Harness with spreader bar
    MMurrays Sailing Race Half Harness with spreader bar
    MURRAYS RACE HALF HARNESS WITH SPREADER BAR
    Murrays Sports
    PRINDLE MAST STEP HINGE PIN
    Murrays Sports
    Fin Belt By Murrays Murrays Part# 011-1001 Securing your fins at your waist gives you the edge during dynamic water conditions. The Murrays Fin Belt holds fins within reach. Just unclip the quick release buckle and go. Water rescue personnel find these fin belts invaluable for surf and swift water operations. The fully adjustable belt is also a handy place to carry your knife horizontally so that it doesn't get in the way, a feature favored by search and rescue personnel.
    FIN BELT BY MURRAYS
    Murrays Sports
    H14/16 6:1 Downhaul Kit Murrays Part# 007-2089-1 This Class-legal, complete 6:1 downhaul kit for Hobie 14 or 16 comes with Harken Carbo blocks.  Includes: Class-approved mast track attachment, all hardware and line. Recommended for use with gooseneck bearing kit (#012-2050) Hobie Part# 2089
    Downhaul Kit: 6:1 Hobie 14/16 This Class-legal, complete 6:1 downhaul kit for Hobie 14 or 16 comes with Harken Carbo blocks. Includes: Class-approved mast track attachment, all hardware and line. Recommended for use with gooseneck bearing kit (#012-2050). Hobie part number 2089
    H-14/16 6:1 DOWNHAUL KIT
    Murrays Sports
    Daggerboard Carpet Murrays Part# 56-1082 ​Approximately 1-1/2″ wide carpet installs in daggerboard wells. Nacra factory item #1083. Sold by the foot.
    DAGGERBOARD CARPET
    Murrays Sports
    H-18/20 JIB HALYARD WITH CLIP
    Murrays Sports
    Murrays Hobie 16 forestay 1/8" Black
    Murrays Hobie 16 forestay 1/8" Bare
    H-16 FORESTAY 1/8" WIRE
    Murrays Sports
    Tiller Rudder Stiffening Kit: Prindle Murrays Part# 001-5141 Spring-loaded tiller connection with contoured spacers tightens the hinge connection on Prindles. Six plastic shims reduce slop between rudders and castings
    PRINDLE TILLER AND RUDDER STIFFENING KIT
    Murrays Sports
    The Murrays Trapeze handle features a contoured grip and a wire guide prevent hand contact with the wire. A recessed cavity in the base holds the nicropress oval and shields the sailor from sharp wire ends. Sold Individually. Hobie uses item #2011 for this handle. Used on Nacra, Prindle and Hobie catamarans.
    MURRAYS TRAPEZE HANDLE
    Murrays Sports
    The Murrays Hobie 16 Jib Halyard Tension Kit allows sailors to quickly and easily adjust their jib halyard tension while under way.  This allows sailors to adjust their mask rake and rig tension to suit the conditions.
    H-16 JIB HALYARD TENSION KIT
    Murrays Sports
    Tack Clew Plate Replacement Kit Murrays Part# 001-1016 ​The Tack & Clew Plate Replacement Kit includes one pair anodized aluminum plates with rivets to be set with a hammer. Rounded triangular plates measure 2-1/2″ by 2-1/2″ by 3″. Replacement rivets are available separately (#19-5005). These are commonly used as the H16 main sail clew plate and tack plate on older H16 sails. Newer sails use a hydraulic press ring at the tack and clew. Compare to Hobie part number 12240000.
    TACK AND CLEW PLATE REPLACEMENT KIT
    Murrays Sports
    Wave Seat Pad Replacement seat pad for the Hobie Wave catamaran. These pads have an adhesive backing for easy application to your boat. Soft seat pad for the Hobie Wave, identical to pads installed on new boats Includes adhesive backing on bottom of pad for easy application Single pad in light blue as shown - order 4 to complete a full wave Use this page to order product numbers: 50-38010061 Light Blue 50-38010071 Grey Sold individually
    Wave Seat Pad Replacement seat pad for the Hobie Wave catamaran. These pads have an adhesive backing for easy application to your boat. Soft seat pad for the Hobie Wave, identical to pads installed on new boats Includes adhesive backing on bottom of pad for easy application Single pad in light blue as shown - order 4 to complete a full wave Use this page to order product numbers: 50-38010061 Light Blue 50-38010071 Grey Sold individually
    HOBIE WAVE SEAT PAD
    Murrays Sports
    CHEATA MOTOR BRACKET
    Murrays Sports
    H16 Aussie Jib Halyard Kit with Pigtail Murrays Part# 001-3302 Reduce mast compression by 66%! The Aussie Jib Halyard Kit for the Hobie® 16 allows easier tacking, better mast rotation and consistent mast bend! Use with existing lower forestay. The "fail-safe" pigtail keeps block failure from resulting in de-masting. A similar system is stock on new Hobie® 16's. Complete kit includes everything you need: hardware with all Harken blocks, 70' of prestretched line, zippered pouch and instructions.
    H-16 AUSSIE JIB HALYARD KIT WITH PIGTAIL
    Murrays Sports
    Sail Pocket Protector Kit Jib Murrays Part# 001-1002 The Jib Sail Pocket Protector Kit includes one pair of tough nylon protectors with indentations for included rivets that are set with a hammer.
    JIB SAIL POCKET PROTECTOR KIT
    Murrays Sports
    Hobie 16 Super Flex Jib Batten Set Hobie part number 0122
    MURRAYS H16 SUPER FLEX JIB BATTEN SET
    Murrays Sports
    Murrays 1 Piece Econo Boat Cover Econo covers are economical, lightweight and waterproof. They are basic one-piece catamaran covers that fit loosely and secure with nylon ribbon ties. The econ covers fit multiple catamarans from the Hobie Wave to the Nacra F18. Econo covers provide full coverage and are ideal for use on the beach and in the yard thru the winter. Materials: The we use a 3-ply polyvinyl material that has a black interior, a fiber laminate core that effectively resists rips, Hobie 16
    Murrays 1 Piece Econo Boat Cover Econo covers are economical, lightweight and waterproof. They are basic one-piece catamaran covers that fit loosely and secure with nylon ribbon ties. The econ covers fit multiple catamarans from the Hobie Wave to the Nacra F18. Econo covers provide full coverage and are ideal for use on the beach and in the yard thru the winter. Materials: The we use a 3-ply polyvinyl material that has a black interior, a fiber laminate core that effectively resists rips, Hobie 16, wave
    ECONOMY BOAT COVER
    Murrays Sports
    Recently viewed